วีดีโอ

Very helpful review video. Subbed, liked and clicked on the Amazon link so hopefully you get a commission. Thank you

So if a 3.5 cu.ft. mixer, it can take 5 80# sacks at a time?

as of 2024 licensee goes for $ 35.00 and 10 years for one house hold with a range of 20 miles.

IN 2024 you pay $ 35.00 for 10 years.

seven years later you pay $ 35.00 for 10 years in 2024

that was 7 years ago 2017 F C C changed licensee it to $ 35.00 dollars for 10 years you mist the memo.

AT least you do have a license your in year 2017 this is 2024 Many changes where made and Midland is still lies to this day

Thanks! You were the only place out there that I could find that mentioned what cable type the antenna ships with 👍

that was 20/17 fast forward to 2024 license is $ 35.00 dollars for one house hold granted for 10 years I have had my license since 06/03/2023.

perfect radio for anything REMBER THE LICENSE PLEASE

well lets get in to 2024 HI power and LOW power where removed IT is know low power channel 1 through high power was moved up to G M R S 5 watts hand held and 45 watts for moble or base.

That midland is narrow band only. Make sure your icon is set to narrow or the volume will suffer.

Huge tip with getting concrete off your hands with vinegar. Thank you.

You can mix 2 packages or just 1.

It’s quieter than the Yard Max.

Thank you for taking the time to review this CENTRAL MACHINERY 3-1/2 Cubic Ft. Cement Mixer from Harbor Freight. As of Thursday, May 16th, 2024, it's currently listed at $269.99 on the website. I was checking out the BAUER 4 cu. ft. Cement Mixer, which is listed at $329.99 as a Member-Only deal with a $50.00 off. It has a capacity of about 1/2 cu. ft. larger than the Central Machinery cement mixer. According to Harbor Freight's website, the Bauer "cement mixer can mix up to two 80 lb. bags of concrete, stucco, or mortar."

F R S is 22 channels not 15 and 8 repeter channels which requires as I see you have as I also have as of 2023 the cost for license is 35.00 for 10 years

"Sale" price is now $200...

and the license is good for ten years and will set you back 35.00 dollars as of 06/03/2023 that is when my license went in to afect

the license covers all family members in YOUR house only

up date midland the f c c license go's for 35.00 dollars for 10 years as stated on my license and cover's the family also.

you license will meet you back 35.00 dollars for 10 years as of 06/03/2023 I am W R X N 824

Awesome!!! Very beneficial to me.

Thanks. Good video, clear, well-organized and presented. This really helped make my decision on renting/buying or just having concrete delivered to my farm site outside Columbia, TN. I’ve got 4 projects pending, maybe a fifth, roughly 100 bags of concrete to mix and not all on the same day so delivery, waste, washout, etc., would add up pretty fast. I ran one of these one summer in high school before I joined the Army many years ago, can’t see that the “science” has changed much at all. Just gotta find a coupon.😊

Amen on the instructions…. The motor started to struggle and cut out towards the end of pouring a 12x10 slab

Great experience and a good video, thank you✌

No loader? Or why wouldn't you have tried the loader. It has more lifting capacity than a 3 point hitch.

I have numerous tall pines to have removed so that I can erect a metal building. Normally, I'd cut them myself but lately I've been wrapped into other chores that I haven't even had time to scratch my head plus it's been in the triple digits of heat down here. Anyways, the segment where you cut that hefty pine tree limb did a sway-number on you while high in the sky. Now that gives you a whole different perspective of cutting them yourself or just watching someone else do the heroics. Enjoyed watching the full-cut. Have a fine week. 👍🏽🤠 7/13/23

I have one of these mixers. After using it the first time I could see the center of the drum was doing a poor job of mixing. So, I did what a few others suggested and flipped the 2 blades end for end. Small end at top and big end at the bottom. Now the center mixes well. Thanks

Mine works great. It paid for itself on the first job I did. Saved $2,000. Definitely worth the money.

Great video. Exactly what I needed. One question though how do you adjust the depth at the nail is set at?

Dam good video

Everything of mine gets the power pole mod

hello have the same problem with my 1025r and can't find the link to your fix....please help

You should idle the engine at a higher rpm to get the hydraulics working fully

I would just buy another post.

My 2022 1025r PTO that engages the mowing blades won’t turn on and the switch for it doesn’t have the ember light on. So I have to figure out why that is and I have the full cab enclosure to make it more difficult to take the right side pane off to access it. Glad that there an automobile mini fuse. Thanks for the video.

Thanks! Helpful!

The chain is really good

Over priced and under powered tractor. Ill never buy another John Deere

Lol just went through that whole align the arrows to align the internal paddles my dang self. Had everything lock tighted and all before i realized had to take it back apart.

What is the largest you can buy?

Great video and I learned what I need to know. Appreciate it. Very cool.

Exactly the same thing just happened to my 1025R after 194 hours total time. It's obviously a design/metallurgical fault, probably caused by intergranular corrosion. Add that to vibration, and that's how metal falls apart. It was quite a shock when this thing simply fell off The interesting part is that I never saw that strap, at all, before, and it's not down in the engine compartment loose somewhere. Do you have the part number for the "new" part? The old one cannot be found in the John Deere online parts catalog, indicating that they have removed the old part and replaced it with the new one mentioned in the video.

I'm thinking about getting a MudMixer and getting rid of this on Craigslist. Anyone interested in the MudMixer and want a review?

Need to weld a hook on that bucket!!

Will augers from local farm stores fit on the gear box of the Landshark?

theyre now 269!!! good bye old days!!!

I have used one of these. Good for the price. The electric motor is weak, wears out fast, but is easily replaced with a higher quality motor. FYI wood post in concrete and dirt causes rot from water damage and gives termites a easy path to the wood. Best to pore concrete then use air gap spacers to attach the wood post above the concrete with concrete bolts ect.. will last longer and termites have a more difficult time getting to the wood

What is the difference between if you had the heavy quick hitch on the three point and this under the PTO hitch? I have a Ag Fab tow behind materials collection trailer and curious on if the imatch quick hitch will hit the motor of the Ag fab