วีดีโอ

Correction! The parking position has to be "G1 X241 Y170 F10000" The position of the nozzle wait tower is Y170 and not Y201!

I'd be interested in a Nikon tutorial for the GPIO board.

God bless you! I've been trying to figure out how to do this for my phone. I tried making a a circuit for the pin 2 and gnd of the shutter with and variating the electrical resistance there but that didn't work great! Will get to work ! thanks for the explainer!

Awesome!

Are they shipping with the updated firmware?

Waiting for DSLR video :)

Fantastic ! Already got the gpio board so found some of the units and ordered. Great way to utilize old cameras too ! Thanks for the video, great effort !

Correction! The parking position has to be "G1 X241 Y170 F10000" The position of the nozzle wait tower is Y170 and not Y201!

I hope you like the video. If so, send it to your friends. Maybe it will make someone happy and maybe it will help. If not, please write a few words what you do not like. I would love to learn and improve my videos. 😉🙏

Correction! The parking position has to be "G1 X241 Y170 F10000" The position of the nozzle wait tower is Y170 and not Y201!

I hope you like the video. If so, send it to your friends. Maybe it will make someone happy and maybe it will help. If not, please write a few words what you do not like. I would love to learn and improve my videos. 😉🙏

I hope you like the video. If so, send it to your friends. Maybe it will make someone happy and maybe it will help. If not, please write a few words what you do not like. I would love to learn and improve my videos. 😉🙏

I hope you like the video. If so, send it to your friends. Maybe it will make someone happy and maybe it will help. If not, please write a few words what you do not like. I would love to learn and improve my videos. 😉🙏

I've been able to put an updated Armbian for SKIPR. They work both bookworm and noble versions from the nice project from Maxim Medvedev. Lost screen functionality with the upgrade, so I reverted to CYD screen project. I received also an update THR v1.2 board from TwoTrees and it has been tricky to flash, it needed before a flash_nuke.uf2 file that I took from Adafruit RP2040 board's site. After nuke completely the flash and the Klipper firmware has been flashed. For me both THR v1.0 and v1.2 works good with updated Klipper and with updated Armbian also THR disconnections resolved definitely. Now I've a new printer.

I'm from Italy, i need this firmware 😂

Nikon D80 SLR

I just got my camera today and I'm quite disappointed. I understand that some features may come later and that's okay with me. However, the camera doesn't follow the Wi-Fi specifications so it can't connect to Wi-Fi networks if the SSID name is long or if certain normally allowable characters are included in the password. Basic compatibility should be in place before release.

Thanks for the great video! I just recieved my GPIO Hackerboard from Prusa. I'm excited for your next video! I followed along and created a Prusa Slicer file with the custom G-Code and cyclinder (with infill and layer settings) and I'm going to save it as a template for timelapse videos.

So you just read the manual and then give criticism to the price setting. One, yes, it's chinees like every other thing in the world these days because they work for peanuts. And second, it works fine . Prusa always deliver what they promise. And yes, it takes time because they want to do it right.notmlike the chinees dump a product, and then you need to solve yourself the problems and buy parts to get it running. Prusa costumer service is very good and somebody needs to pay this so yes they ask money but it's not just the camera you buy. You buy the cost of developing the software,he customer service, and the security of their products. And if you look at things, do it properly. For the moment, the key of your wifi internet network needs to be numbers and letters. Otherwise, it will not work.And yes, they now it and are working on it. I have before a esp 32 camera, and I can say this is much nicer to look at.if you buy it you will not be disappointed.

Thanks. I’ll stick with using my blink camera.

this is the most useless thing Prusa has released. my Tapo C200 offers more things for much cheaper and it's as secure as this one...

Thanks, I'll wait for the livestreaming feature first before deciding to buy it or not

Reminds me of the beagle, except the beagle has some nice software.

Do you know if it has been corrected the problem that oblige to revert to a previous branch for THR flashing?

Hi there! Very nice tutorial just what I was searching for. But did you try the last 2.02.34 firmware? drive.google.com/drive/folders/1K-4e2nAhSjUkt9YJFwnlJJ8GXcSR0hhE

Thanks for doing a video on my design! I'm glad you found it useful.

What is the triggering mechanism?

Very nice review

I'm going to have to watch the frame-mountable case on Printables. I printed one, but haven't deployed it yet. I didn't realize that there were two versions of the Hacker board from Prusa with different TRRS jacks, and apparently I have the new one. (03 on the board silkscreen.) Or, carve out more clearance aroundthe slot for the TRRS connector on the part that I've already printed...

Hey I have the Voxelab Aquila C2 and I was wondering how I could get a new usb storage thing for it

Do you think the xBuddy board allows for something like a Bluetooth print head? Would the GPIO board be needed?

What about using a smartphone for the timelaps feature?

Great stuff, I’m receiving mine tomorrow. Thanks!

Would it be possible to make a tangle detection sensor with help of the board?

Not sure of about the camera, but I would be interested in time lapse and if this allows us to view 60 fps video in prusa connect.

I bought one from a dance sister NIB for $150. Being new to 3D printing, I'm reasonably impressed with the thing. The stock extruder sucks donkey balls - I replaced that POS right quick with a dual gear version that works much better. Added a light and a filament guide and I've had quite good luck with it thus far. The red filament that came with it wasn't the best.

HI.I flashed it using your method 5 times until I achieved the ideal combination of all the numbers and letters, but now the screen behaves inappropriately, sometimes it freezes, before it would freeze less often I understand that this screen is garbage, is it better to buy another one?

After dozens of useless videos on TH-cam, I found this one. Congratulations on your great work. It helped me a lot. I am eternally grateful for your effort. Good luck to you. Congratulations!!

Hello, thanks

Correction: 3:40 In the video I say that instead of ESP8266 the printer will now have ESP32. This is unfortunately a false statement. The new module also uses the ESP8266.

Really bad tutorial. You let the user do a bunch of stuff and run a lot of ssh commands (of which a few might not work based on other variables on the user's machine), then only after that, (and at that point my machine was already bricked), you say: "Ok, now your printer is f..d unless you take the head apart, do some soldering and update it fabricating a dedicated usb wire". All stuff i can do, but wasn't ready to. Re flashed the EMMC, avoided Klipper and moonraker updates, and all good and working, but very misleading content.

didnt work for me - screen stuck on starting -Not sure how to resolve, does anybody have this problem or have resolved this

hi i was wondering if you could answer a question for me. someone recently gave me an aquila c2 but it had no lead screw. i ordered one 365mm T8 Tr8x2 Z Axis Lead Screw but my prints come up compressed. did i get the right size. is it possible i need an 8mm pitch? this is driving me crazy. any help you could give would be appreciated. thanks

This is the exact fix I was looking for. Thank you! Saved me getting a new hot end :D

NICE

Hello, thanks for this video, I finally managed to do correct updates, however, I can't do the calibrations from the screen, it systematically restarts

Since the printer is broken, ill give you $5 bucks rn for it, take it or leave it 🤷

nice share but file link is not working

I could ask that you go through all the parts past the screen upgrade VERY SLOWLY. You're talking about copying and deleting folders for quite a while and very quickly. I have an AK1 and I was going to try this but it's a great deal of information given very fast.

Wow! So cool!