วีดีโอ

Here is a question, as the truck is not level is there a little oil remaining in the oil pan? If there is I would think the oil new oil filter would pick up any metals or grime in the little oil that remains.

Good got same set up looks good

You have all your patch panels in the green cab, woohoo

The alignment for the mustang clip is the upper two bolts on the A arm any alignment shop can aligne it for you. But get your rear suspension in first.

Excellent job now you're truckin

She sure is a keeper

Back to ya again and I am looking for a 58 pickup truck or panel to put on a 2002 4X4 Chevy trailblazer frame and rock and roll

Im a new subscription and I am watching you guys from South Dakota keep it going 😊

Any follow ups since this video was done? You doing anything else with the cab? Did the window fit well? Thanks for your videos. Jay G

Does both cabs are big windows 😍

We've been using a wooden beam and placing it through the door openings to lift the cabs. Place the cherry picker arm in the center and lift straight up. Works great.

I know this is a late reply but it appears that the upper section of the cab is completely rotted out from the inside out between the steel.panels above the back glass as well as above the windshield. Also the upper door pillars look to be rusted out on the inside where you can't access it. This is likely too extensive to repair with aftermarket patch panels but a donor cab would be ideal and an experienced metal fabricator could save this cab. The bottom of the cab can be repaired with readily available patch panels. Another thing I noticed is the stainless steel VIN tag is missing. I suspect a previous owner used the truck asva VIN tag donor due to the fact that the entire upper section of the cab is completely rotted out and will require more work and money than is feasible. The previous owner sold the truck with this in mind. Not impossible but definitely for an extremely ambitious and motivated truck lover. The most important aspect of any classic truck is the cab and specifically the upper section of the cab around the windshield, door pillars and inaccessible body seams!!! If these sections are rotted out either pass on the truck or plan to spend a ton of time, expertise and money to repair it.

454 just got stuck

Sorry, Bin the Both of them

You put the 2nd washer in the wrong spot, it goes in the recess in the clutch cover, not between the splined clutch plate and the spider gear

Wow the Engine really looks good with the dress up kit, i keep think i'm seeing a visor on the truck, lol, you might have something there, i just shortened the frame on the 55 Truck and had my neighbor help me put the bed on, now i'm up early and need to take the bed back off, guess i have to wait for him to get up, makes me think about how you were able to pull yours off by yourself, has anyone ever said it's easy to shorten a bed and frame, ha ha, have a great day😁😁 Mike DRF

I think your crossmember is upside down.

I need to do the exact job on my 1956 Cameo truck. What company did you buy the parts from? I really appreciated your video. I'm not a body guy , but will learn from this project. I learned alot from your video. Thanks. Jay G

Chrome don't get you home, but it does get you laid.

Thair is never to much chrome

If it dont go,, chrome it

Nope need to chrome the engine compartment to. Some 200 watt leds all set.😂

Chrome gets u dome not home

I dont like it because it holds heat

Let’s make the whole car chrome

Need to polish that aluminum intake

By the time you get your hoses and sparkplug wires, it's going to be beautiful.

If its slow just put some more chrome on it,,,at least the chicks will still dig it.

Can’t have too much Crome

This is the only time I think chrome looks good. Shiny engine in a “rust bucket”

Another rebuild by Bobby and the Billy Bros. 😂

뭐여? 완성까지 영상 없이 6개월간 쉬다가 C10으로 복귀? 와이프 드림카라더니... 혹시 이혼함?

Wow you like to have a few projects going at the same time, looking good, looks like a Pioneer Super Tuner, had a few of them over the years, have a great weekend😁😁

The good old rattle can rebuild

Where did you source motor mounts? Got a 78 sitting here looks identical to your 77 that I’m toying with throwing a 6.0 LQ4 in that I have sitting here originally for my Camaro.

That went very well, did you ever go over and check out Glen at Red Neck Coachworks it’s a must see if you are goin to be doing a lot of rust repair on a tri 5 truck

Hey guy, just found ur channel ! Hey we done my sons 55 p.up about 5 yrs ago I used the Urethane 2k High Build primer & paint on it putting it together & painting the Truck, for the Money he can't beat it, it still looks good like the day we painted it ! Just wanted to tell ya, all about the $$$ 😂

Hey man just found ur channel ! There Great Old Trucks have/had a 68 C10 now ! M/S kicking my ass 22 years passed it on to my son ! Good luck to YA. ! 👍✌

Hey Man just found ur channel ! Nice ole Trunk, son has a 55 pup, he chose the 6/3 out & 383sbc auto in ! Looking & sounding good ! Good luck to ya ! 👍✌

I just started watching this video and I’m going to get pulled away for a day or two till I get back watching, but I wanted to mention a friend of mine his channel is Redneck Coach Works if you haven’t been over to see Glen you should check his 59 build he does some great rust repair in all the good areas, lol, let me know if this helps , have a great weekend 😀😀

Nice series on the Ford 9”, should have good service from the rear end, the build is coming along nicely 😀😀

Good video turned out great, catch you on the next one 👍

Good video coming along nicely 😀😀

She’s really got a nice stance, maybe drop the back and get the weight on the front and go from there, the hood from the 56 is sweet Mother Nature gets the credit for that, although I like the 55 emblem quite a bit more, can’t wait to see my big window in a short bed😀😀, catch you soon

Yeah I like the idea of making some of your own panels for the floor, I would buy the step and rocker they are cheap and would save you a lot of time and of course buy the cab corners,I have to do step and rockers on my 55, I’m just about to start on shorting my bed and frame and then I will start moving forward with the sheet metal work starting from the back and going forward, looks like your really making head way , I’m sure your quite a bit farther along now I plan on getting caught up on the videos 😀😀

Good start on getting the front end on , going to be a nice driver 😀😀

Great truck to start with, thanks for sharing 😀😀

Love the build, what did you do for transmission and transfer case?

is this woman the definition of liar or just simply clueless

Interested in your extra big window cab. Where are you located? How much are you asking?