วีดีโอ

Thanks. Figured out an easier way for Elf Connect from in Console but hadn’t figured out Gold in Elf Minder

Could barely hear anything.

Indirectly we all are poor😂😂

Which device is this? Do I have the parts to build in on hand?

👍

I'm currently using this Cogsworth City kit. It's pretty good, and absolutely a good value, but by no means is it a complete teaching solution for the absolute beginner (the public to whom it's marketed). My first problem was that, as shown in your video, there are 40 resistors included, with 10 each of four resistance values --- 220 Ohms, 1k, 10k, and 100k Ohms. They're all identical in appearance, as far as I can see, and the only way to tell them apart is with the brown tape/labels holding them together by their ends. I knew that, once I actually started using those resistors in my lessons, I'd have a huge jumble of lookalike parts with different Ohm values and no way to ID them unless I bought an Ohm meter and tested each one whenever I looked for a resistor of a specific value. This kept me from actually using the kit for several weeks, until I decided to attach small paper sticky labels to each resistor showing its value before I detached any of them from the brown tape. Secondly, this kit is my first experience with a breadboard. One of the first 6 lessons said something that Inventr.io assumed the student knew about a breadboard ("attach this jumper to the ground rail."), and I had to stop and google "what is the ground rail on a breadboard". I did more breadboard research before I went back and continued that lesson. I found a good article and video from Instructables that explained the breadboard's parts, the way in which many of its pin holes are internally connected while others are not, and the purpose of the double-sided tape on the breadboard's underside. Despite these setbacks, I still find it a fun learning tool. Each lesson page on the website includes at the top an image of the story characters. The images are beautiful artwork (possibly AI-generated), clickable, and are large enough to make nice wallpapers for my monitor. A little value-add.

War drivers unite!

👍

@463n7 is this marauder?

👍

Actual buyer here. Had some problems identifying the 3 "extras" but an email got a next day response with the answers. Have now dived into half a dozen lessons and they are first rate. Whether you're a kid or an adult they will teach you the basics. I messed with electronics as a kid back in the '50s with a Radio Shack tube kit and later several Heath Kits. My 8th grade graduation present was a Heath Kit Oscilloscope. Over 500 parts and they all had to be hand soldered! No integrated circuits or microprocessors existed at the time. The educational and vocational value was outstanding.

463n7

What is this? This is programm on key?

i have this . and i have wifi but no sound drivers. if anyone knows who to fix

The famous display. I still haven't gotten hands on one. Lol

This PC is not upgradable. Try Linux install instead of Windows and use it as a glorified cellphone.

Interesting! Orange Pi 5 MAX could also work if someone made a m.2 WiFi hat for it. For the WiFi highest sensitivity, one could attach electronics to a vehicle's sealing. And have custom 1-channel narrow bandwidth antennas poking through the roof with very short cables.

I got this but it did not come with any instructions for the projects. How do you get the step by step instructions for projects that we can do with this?

Hey got the bw16 flashed, and confirmed it to be working but when I try to do that final serial confirmation. I’m not getting any response not reacting to the space bar or anything it’s live on device manager and all is right but no response. Even used my other usb-uart and double triple checked my jumpers. Any ideas?

last year they offered the 30 day Adventure set with bonus are for around $70 +s/h

Sell these still?

I wouldn't waste my $ on the robotic arm if I were you. Way too many negative reviews out there on it.

Nice man! Thanks for sharing, I may have to give this a try.

👍

I dont trust it imeaditly after seeing ai images for there marketing

do you have e any videos of how this case goes together. what holds the boards i. there securely etc?

After a whole year of me struggling, this video fixed it. Had to update my board manager. Set XCLK MHz to 30 on the web page GUI to get the camera to not be so laggy Thanks for the help

what is the setup here. line in? or digital microphone?

Cool Video! Wardriving with the raspberry pi works great with an alfa awus036axml without any installations on PI OS. For browsing and data connection I use the tp link acu1300 high gain which depending on signal strength receives 200 to 300 mBits easily. The Antenna could be pretty solid for wardriving yeah

👍 Don't feel bad, I still haven't gotten around to buying one. 😂

I'm behind. Need to knockout 106 and 107. Nice tshirt and nice video!

@Geek Cash™ Golei 1 pro PDA Rugged Aproved...!!! Vídeo tested pad!!

Ok. This knuckledragger will read the rest of the posts but this seems effing cool as eff. Why did this take so long to arrive and get pooped on immediately? So many of of us knuckledraggers were screaming for this over a decade ago. Laptop are lame. Tablets are red headed stepchilds of laptops, which suck as well. Is there any other offering in yhe sub $400 range that has a screen?

Another video of what seems like the same product appeared to have a heat pipe setup. /The rabbit hole gets deeper //Nerds today are so spoiled ///Nerd

The bigger the gob, the better the job!

I’m gonna move this viewing operation over the computer, back in a second

I'm getting an error trying to flash board B. V:\wardriver\B\B.ino:392:60: error: cannot convert 'BLEScanResults' to 'BLEScanResults*' in initialization.... Any ideas?

Where do we get the battery trays from?

ahh, i want one but i'm poor

👍

Make a video once you have the entire collection available please! I want to see all the versions in one spot :D thinking of printing one version with that 10000mah lipo battery, even if the pcb is the same inside.

So...yes I agree :D firstly, adding an antenna is a pain indeed, I removed that capacitor, bridged the points, added external antenna and...nothing :)) even if I bridged the first 2 points back it couldn't see any networks after, but the good thing is that I found some bw16 with external antennas at the same price, will test them in the coming days. I remember when I left the gps pins too long and they were touching the sim800l back plate and I was wondering why I don't get any fix :)) Both versions looking awesome but I have a question: isn't the one with battery pack getting too hot? My 2 pack one get around 60 C in my pocket and I am kinda afraid to walk with 2 hot 18650 in my pocket:D

Gotta get my hands on that pcb! 📡📡

Thanks for all this work. It's been a great project to follow and build. This is probably a stupid question, but do I need separate screws for the case? I've printed the case but haven't finished building the PCB yet and trying to get ahead of things. Thanks again for putting this all out there.

That is super slim!! nice work.

What is it used for, if you explain a little please 🥺🥺🥺

Wow, those are awesome!

👍

thanks for putting all the links, susbcribed

Hi, I have the 2 pros but I need the win11 drivers. Do you know where to download them?