วีดีโอ

Too bad your customer service sucks and you don’t bother responding to emails. Was gonna buy a few of these but not anymore. I’ll take my business elsewhere.

Curious...have you done a head to head comparison with a Tormek? I have both and like both. Looks like both go to 1000 grit. If I can get same sharpness, cubitron wins due to time saving and ease of use. Thanks in advance

¿ wieso kann man niergends auf dem ganzen taylor-shop die hölzerne schleifmatrize finden, an welcher der spezialist den essiggetränkten rohstal einen zur längsachse rechtwinklig angepassten 22° schneidwinkel verpassen tuut

The UK left the EU dictatorship

are you aware that your are using actually in almost every sentence

Hi, just seen this video. you say you drilled an 11/16th hole in the front jaws for the threaded part to pass through. As the rod is 11/16th diameter doesn't this give you severe racking problems as the rod will be fixed perpendicular to the rear jaws. Apart from that, it's a really good idea. The other problem is that the Pony Jorgensen parts have been discontinued (at least they are not available any more in the UK).

Thank you for your humor!

Very helpful. Thank you.

Very helpful. Thank you.

Looks like they don't sell the 3/8 inch one anymore. I could really use 3/8th or even bigger.

Very valuable video, very detailed and well explained always had my Dad around to sharpen the chisels, you've thought me another great skill, thrilled I can bring my old chisels back to life

Just used first one yesterday, exceeded expectations!!!

That is awesome, thanks

DUDE you overheated the steel, you ruined it

I had tried scrapers for a while and I never could get a good Burr I mean a good shaving from my scraper blade and I saw the accuser with Stumpy Nubs and I ordered one and I have used a scraper blade ever since there's one that stays pretty much on my bench all the time I don't know who came up with the ackee bird but man I'd like to shake their hand it's a fantastic tool

I wanted to see the result of the cut "How clean was the cut?"

Please get your facts straight before saying things that are not true. Dado stacks are not illegal in Europe.

I just use dial calipers, no batteries required 😁

Just ordered the kit. I bought card scraper from you last year, which are great, but sharpening is tricky. This should help

It seems like this is a CMT marketing gag. Neither dado blades nor any other machine tools are or were banned in the EU. I wonder where these ridiculois claims come from and how they persist so stubbornly. In the EU you can generally use whatever you want, except if you have employed workers in your shop (journeymen or apprentices). If you have these, you are to abide to the rules set up by the workers' compensation board. Which, again, does NOT ban anything as long as long as the base requirement of safe operation is given. Which means a sufficient shaft length and machine weight (and, well, reasonable power). So in a commercial setting with hired employees you wouldn't be able to use a dado on a small table saw both legally and physically, but who cares. On a format saw, which you will almost certainly use, it's perfectly possible and allowable, and on mills the likes are even commonplace (though named differently).

Thanks man! Great vid.

Creative.

Can't you square your fence to the miter slot by simply lining up the face of the fence with the edge of the miter slot? A piece wood (the width of the slot and proud of the saw table) or even just a ruler placed against the wall of the slot, will show any gaps indicating misalignment.

I prefer the Fastener-Cal Calipers. You can limit them to 1/32 accuracy which is quite good enough. Getting a reading of 77/128 is annoying. Yes metric people....mm makes more sense.

I wouldn't use any dado set but this one on a SawStop. I don't have a SawStop, so I'll continue to use my Amana dado set, which I invested $300+ to buy. The teeth are all carbide on the Amana but I assume these CMT Locked Dado Pro are not since there is no mention that they are not just carbide tipped. That makes these disposable or with maybe a one time resharpen?

Just make a washer of the size you need to raise the magnet to the right position.

Hi any options to the pillar drill? don't mind it taking 10/15 mins but working in tight storage space no room or cash for drill.

It is truly a pleasure to see a store / owner that actually understands and caters to the average enthusiast. Thanks.

Those are really annoying limitations, because they could all have been avoided with a better design. Someone needs to make a better version of these.

Thanks. Now I need a table saw with a metal top!😅

And a year later they are all gone from your store!

my shinto seems to be really flemsy, do They Break easy?

Do you sell the glue stick that you used in the video? If not, what is the brand name of the glue stick?

Thank you Sir.🎉

Can I build this into my bench instead of placing it on top?

These work great! I also have the sharpening system for the drill press, exceptional idea! Thanks Mike.

These are truly remarkable rasps. I purchased one and was blown away by its effectiveness. This knob is a noteworthy addition.

I don't see that very nice wide, protractor-tooler on the website. Is it no longer available?

Thank you Sir 🎉

Sound is jacked up. Comes on half way through.

Yet another American who thinks he knows what the requirements are in Europe and then tells complete nonsense. (A dado in the USA does not have to comply with EN 847-1, so the inscription about this is purely commercial). A dado in Europe only needs to meet the requirements of EN 847-1 for industrial use. And believe me at an industrial level there is no one who wants to use a dado! The EN 847-1 does not apply to do-it-yourselfers and small businesses.

The moment I see someone hammering their chisels to "prove" they're blunt, it shows several things: - Their workshop runs on a lot higher budget than mine - They don't take care of their tools - They're not someone I'm going to look to for tool advice

I'd imagine most weekend wood workers do not have a drill press either to go with the specialty chisel sharpening gear. They might have a wood planer or jointer though!

Would you recommend this for hand plane blades, too? Is there a maximum width blade it can handle?

Patented?IKEA uses that system since the stoneage

Thanks for sharing

i bought one of these kits and am having some trouble with sharpening a scrub plane iron. do you have any helpful pointers on how to get a camber with this system? I can't find anything useful on youtube or reddit relating to cambered irons with this system. Thank you in advance.

Then proceeds to throw chisel down on workbench between cuts.

brilliant tip

I noticed that you offer 5" and 6" options. Why would someone go with one vs. the other?