วีดีโอ

Love the channel name! I am a fellow Randy and had to subscribe lol!

Stupid video. Just cause you assumed its crap since its made in China. Premium guard makes these for Napa now. Some of the best oil filters for their respective price. Wix honestly makes crap now. Chinese are still able to make good products cause overhead is less. Cut both open before you make stupid assumptions.

I have a 2013, in SW PA. Rockers are shot, and it's not gonna pass inspection in December. One year in... how are they holding up?

Central heating cleaner works amazing !

Stop saying walk It is not walk it is rotate

th-cam.com/video/jaaTyL099RA/w-d-xo.htmlsi=tk1gYbBQmeQRabcK. This is from Spicer. If you add to your knowledge base the idea that not all vehicles like 2.5 to 3 degrees down, the most common setting, on the pinion you will be fine. My lowered 2017 F-150 liked 1.5 down. Also, you will never be able to tune out a driveline vibration with old u-joints. If the old u-joints were running 3.5 down and now you have reset the angle to 1.5 down, it will shake. U-joints set up a wear pattern and you have just changed how much they need to move. Always put new u-joints in if you need to change pinion angle or you end up chasing a ghost. Sometimes the new u-joints fix the vibration and you do not need to change the angle. You never eliminate driveshaft harmonics. You just minimize it to the point you don't feel it or it moves to a driveshaft speed you never hit.

how much were you all in on cement slab and building

I dont like how sill plates just sit on concrete

Hey how are the quick covers after 2 years?

Do you know that your hydraulic hose can actually go on the other side of the tank? Just take out the fitting with the Alan head move it to the other side and then move your hydraulic hose to the same side as it’s coming out of your post.

Thanks for sharing, I’m having similar issues but I have a shifter on the steering column, 2014 supercrew cab

Okay, it's just not me. I have been installing p/s pump seals for years, and never had this problem, until this last weekend. Rolled up the lip and destroyed the seal. I'm trying to visualize the drill and file. Are you using the drill to drive the shaft while filing the lip? The term "pull the drill" I'm guessing is spin the shaft with the file against the shaft step? New seal should be here this week, so I'll be doing just this. Great job. BTW this Eaton is on a 65 Mustang.

Sounds like this guy didn't research much. Of course extras cost more.

Try calling Napa customer service and the offshore call centers. Napa must hate American jobs and that almighty dollar

Looking at doing this. Do you have issues with the slide lock being in the way?

Hello. So how has everything held up? I just built a 26x50x10. Getting ready to insulate. What brand of foam board did you use and where from? Thanks

If you watch a lot of videos opening them up, many times the USA made ones are worse. But it’s the price that pisses me off.

Hay man, this is a great video, very well explained for the average guy, we had the same issue with a car and had to cut the tunnel out to get the right angle.

The worst part about it is they're charging the same prices for the Chinese made ones in one region as they are for a US made one in other regions. This is a regional thing. Out East they are all made in China now. In the midwest (for now) you can still get a US made NAPA gold 1040 for about 13 bucks. The same filter in say New York, for example, is also about $13 bucks. That shit shouldn't even be legal!

quanto?

West Coast is wix/mh...east coast is premium guard.its because wix couldn't keep the supply chain filled.its largely Mann Hummel blame...anytime the Germans buy a us company they save money and cut back.watch the Simpson's episode with the germans buying the power plant...

Cant find the rite size chuck anywhere

Did you ever figure out why they wouldn't install gutters in the front of your building?

You probably do not have to worry about rain water. A carport style building doesn't have a foundation or siding that needs protection from water, and all of the rain that hits the roof was hitting the ground before and running off to the low spots anyway. Think about if you only had the slab with no building on it. You wouldn't worry about the rain running off of the slab into the yard. You should NEVER need gutters on the front of a gable roof. That's a huge red flag that the installers weren't properly trained.

Why are you assuming it's "crap" just because now made in China?? Have you cut in opened and compared the quality to USA made one??

Should be using a Gano Filter to catch the scale so it doesn't make it to the radiator core, that said would have left it in there for 2 months to get the scale completely off. Curious if it actual lowered your running temps?

So, the old saying goes, "If you have to ask the price-you can't afford it."

why didn't you do a dedicated fuel regulator instead of just the fuel filter return line to the tank AND was there any problem with the return being smaller than the supply line- I want to do this on my 64 2dr HT Falcon with a 302

Did you ever have an update- did this help?

Did you notice any problem because the return line was SMALLER than the supply line?

Hey I'm over in North college hill.. How much did the permit end up costing you in our area?

Wow, yeah - that’s garbage engineering. I checked out my neighbor’s John Deere and it’s the exact problem. 😣

Was wondering why my mower was acting slower in reverse, but not a JD. Same trans axle I think. But, it makes me wonder if I could 3D print one of those, and then drill it out to accept a bronze bushing. Over kill? Maybe. Ever wear out? Probably not.

Thanks for the tip. Found the part on Amazon

lol,the many of the old Napa gold wix filters were made in Mexico and Vietnam,even wix isn’t wix anymore per say. I do think the new Napa gold filters are still a premium filter,but obviously the price should come down a hair given they are paying less for them, as a shop buying them I too am still paying the same price as the wix made,however to source wix filters now the price would double and people won’t buy them unfortunately

Ah, life. It is NEVER as we hope and plan for it. I'm so sorry that you had to go through all of this. That really sucks! I'm glad to see though you've persevered. The shop looks great! So many in this world are so crooked and deceptive all for the love of King Money. It would be so nice to live in a world that when you buy something, it's turns out as you had hoped and planned for. Thank you for sharing this info with us and for the warnings! Blessings to you and yours!

Awful company with awful junk products. Terrible place.

just found out when I went to Napa to buy a 1042 gold filter. Guy at the counter informed me. Not paying $13 plus tax for a china filter. These filters used to be $8 for a rebranded Wix filter now it's over $13.

Getting ready to build one too and one thing I learned is always do the vertical roof and siding ribs. Much better at shedding water

Napa no longer gets their filters from Wix/Mann and Hummel. They get them from Premium Guard. Wix filters are still made by Mann and Hummel and sold at Oreily

Poor planning on your part. Slab is wrong for building, you should have went with a vertical roof.

Nice shop

Holy moly

Probably going to get condensation?

Thanks very helpful

I had a metal building put up and every time it rains hard I get water coming in under the roof ridge and I also spray foamed every corner to help keep rats and snakes from getting inside, for the most part. That insulation on the ceiling isn't doing much with the large gaps between insulation and the structure. Oh yes, and even worse that the huge doors aren't insulated. I'm about to make my metal building into a man cave and will be building an interior wall that will separate the rollup door from the insulated room. I'm also going to have to put a covered porch over my door because rain comes right in underneath it. Makes zero sense to put the door inside the framing like they do, so the rain runs down the door and into the building.

I have this exact same problem in 63 falcon! I’m trying this!! Thanks!!

What do you call that shifter switch trying to get from Amazon but i want to the right name..any recommendations thanks guy's

These units are crap. Had two quit heating on me over the winter.

Great video