วีดีโอ

What's the app?

Do you guys have instructions on how to install the ffc cables correctly?

What's the app?

Hello brother, where can I get that grease with what reference?

Qual o caminho do id. Na mimaki cjv30? Pode ajudar

Hi, I have CJV30-100, I saw your video and did it accordingly, but when I tried test print, it's not printing. Kindly assist. Thanks.

No gloves. Awesome

How much is the print head?

there is a fine metal mesh filter inside of all print heads. if this filter becomes gunked up with congealed pigments (like chewing gum), you will not be able to clean it. buy a new head. if you own an older printer, like a wf-7610, you are taking a gamble with print head replacements as they mostly come from China and are refurbished (you will always have missing lines in nozzle checks), and you will most likely not be able to align the print heads anymore because the patterns will be distorted. horizontal alignments are not possible with refurbished heads UNLESS you are lucky enough to get a head that doesn't have missing lines in nozzle checks.

How to install parameters on new Main PCB.

👏👏👏👏

I would like you to explain the setting method after replacing the head.

Does it matter which tube connects to which connector on the cap? I thought I read in the service manual that it does matter... Just don't remember which is supply and which is waste..

Tenho uma mimaki jv30 160mas falha muito o magenta a cabeça é nova

السلام علیکم اخی رقم سر ئایدی مسحت یمی شلون یسلح بدون زحمە

Hello, I am using Mimaki JV33, Rasterlink 5, every time the head comes on the cap and spit out paint while printing, so a lot of paint is wasted. Is there a solution for this, can I prevent the head from coming over the cap every time during printing? I would be glad if you help.

does anybody knows from where I can get similar printhead ? they gave me a 3,400$ it is to much for me

MIMAKI original Parts supply

MIMAKI original Parts supply

Would this be the same process for a Valuejet 1324x?

Can repair it

One thing you didn't tell us is that when you take the ink lines off the dampers the ink drains out of the lines all over everywhere, and the screws on mine had locktite on the screws holding the head so we loosened the silver bracket it was attached to and once the head was loose we then removed the bracket attached to the head...other than that a pretty good video....

merciii beaucoup

After replacing print heads, do they need to be calibrated (aligned)

Stupid question but I forgot it's been a while since I've cleaned my printer do I need solvent cleaning cartridges with smart chips?

Do u have a copy of the service mannual for cjv150

Show obrigado

excelente el video, los felicito

I have a black cover above my ink, how do I remove this piece in order to pop out my ink tanks?

When I change a Printhead I recoment to change the dampers too.👍👍

How much its charged for replacing the head???

E077 CALOR.. please

✌

Plz help is tht repair or not?

I have code errore 200 helpe my

These videos are very helpful are needed on TH-cam. Keep pushing and your subscribers are going to jump through the roof! Need capping station videos and maintenance videos for the sublimation printer version. I’ll definitely send traffic this way and subscribe. Thanks soo much you are appreciated!

After changing dampers on my mutoh valuejet 1638wx my printer is stop working, it starts initializing and then shut down instantly and i dont know why, i realy need some help! Please !

Hi i got a quick question with the print head.. I have a CJV30 which should be essential the same as JV33 + plotter function In you video your using a Mutoh Head .. Is it DF-49684 ? if it is .., would the same Green connector head work on the CJV30 ?

Can this be repaired? How to please. Thanks!

Don't forget to input head ID or you'll get an error 202

Hi, great video! Is the print head compatible with the JV33 the DX5 or DX4? And would you be able to tell me where I can buy this piece somewhere reliable?

Thank you. I w'at to speak with you can you tell me how

Is there any settings on the machine that need to be set before installing new dampers? I've heard talk of needing to open some Valves to get ink to flow... I'm not sure where I would find info on that. I need to replace my 5 yr old Dampers on my CJV30-130 but I'm a bit scared to do it. Any advice?

I dont mind taking out the whole capping station during this process, allows me to clean up tons of dried ink that may have accumulated

is this something a technican usually would do? im very good at such stuff do i really need a technican for such machines? looks to me like i could find everything online? would be nice if u could anser my question thx

You forgot to show us how to manually program the new head. That would make a great video.

how often are you supposed to that?