- 26
- 144 767
Chainsaw Farmer
เข้าร่วมเมื่อ 17 มิ.ย. 2012
Sketchy! Felling a rotten water oak on the farm.
Links to Equipment/Gear I Use:
Helmet: amzn.to/3m0fXWO
-----Hearing Protection for Helmet: amzn.to/3m0fXWO
Felling Wedges: amzn.to/3oku8sX
Wedge Pouch: amzn.to/3oku8sX
2-in-1 Sharpener .325": amzn.to/3lUhjCF
2-in-1 Sharpener 3/8": amzn.to/3i7xH1v
Chainsaw Gas/Oil Can: amzn.to/3uaw2wO
First Aid Kit: amzn.to/2XWEXq8
Splitting Maul: amzn.to/3GgTDSq
Helmet: amzn.to/3m0fXWO
-----Hearing Protection for Helmet: amzn.to/3m0fXWO
Felling Wedges: amzn.to/3oku8sX
Wedge Pouch: amzn.to/3oku8sX
2-in-1 Sharpener .325": amzn.to/3lUhjCF
2-in-1 Sharpener 3/8": amzn.to/3i7xH1v
Chainsaw Gas/Oil Can: amzn.to/3uaw2wO
First Aid Kit: amzn.to/2XWEXq8
Splitting Maul: amzn.to/3GgTDSq
มุมมอง: 123
วีดีโอ
Felling & Bucking Two Trees for Firewood (Part 2 of 2)
มุมมอง 6372 ปีที่แล้ว
Felling a cherry with my MS362C-M with Egan Straight Shot Muffler & 20" light bar. In Part 1 I fell a yellow poplar. Part 1: th-cam.com/video/RS0YHZSchRA/w-d-xo.html Links to Equipment/Gear I Use: Helmet: amzn.to/3m0fXWO Hearing Protection for Helmet: amzn.to/3m0fXWO Felling Wedges: amzn.to/3oku8sX Wedge Pouch: amzn.to/3oku8sX 2-in-1 Sharpener .325": amzn.to/3lUhjCF 2-in-1 Sharpener 3/8": amzn....
Felling & Bucking Two Trees for Firewood (Part 1 of 2)
มุมมอง 4072 ปีที่แล้ว
Felling a yellow poplar tree with my MS362C-M with Egan Straight Shot Muffler & 25" light bar. In Part 2 I will drop a cherry tree. Part 2: th-cam.com/video/mBaWmPh4EQM/w-d-xo.html Links to Equipment/Gear I Use: Helmet: amzn.to/3m0fXWO Hearing Protection for Helmet: amzn.to/3m0fXWO Felling Wedges: amzn.to/3oku8sX Wedge Pouch: amzn.to/3oku8sX 2-in-1 Sharpener .325": amzn.to/3lUhjCF 2-in-1 Sharpe...
Putting a PTO driven homemade log splitter to work!
มุมมอง 1.4K2 ปีที่แล้ว
Putting a PTO driven homemade log splitter to work!
*UPDATE* Egan Straight Shot Muffler on MS660 Clone - Removed Baffle
มุมมอง 3.6K2 ปีที่แล้ว
Buy here: eganperformancesaws.com/products/egan-straight-shot-performance-chainsaw-muffler-660
My Chainsaw Gear & Supplies for Hurricane Clean Up - What I Pack
มุมมอง 2892 ปีที่แล้ว
Helmet: amzn.to/3m0fXWO Hearing Protection for Helmet: amzn.to/3m0fXWO Felling Wedges: amzn.to/3oku8sX Wedge Pouch: amzn.to/3oku8sX 2-in-1 Sharpener .325": amzn.to/3lUhjCF 2-in-1 Sharpener 3/8": amzn.to/3i7xH1v Chainsaw Gas/Oil Can: amzn.to/3uaw2wO First Aid Kit: amzn.to/2XWEXq8
Egan Straight Shot Muffler on MS660 Clone
มุมมอง 5K2 ปีที่แล้ว
Update: th-cam.com/video/TQ2qSM_vxoo/w-d-xo.html Buy here: eganperformancesaws.com/products/egan-straight-shot-performance-chainsaw-muffler-660
Egan Straight Shot Muffler on MS362C
มุมมอง 27K2 ปีที่แล้ว
Buy here: eganperformancesaws.com/products/egan-straight-shot-performance-chainsaw-muffler-362
Unboxing Greenworks Pro 60V 10" Brushless Pole Saw
มุมมอง 3.4K2 ปีที่แล้ว
Purchase here: www.greenworkstools.com/pro-60v-brushless-10-inch-pole-saw-1405602
Dual Dogs on MS362C
มุมมอง 1.6K2 ปีที่แล้ว
0:43 - Meant to say 261, not 262... 🤦♂️ Dual Dog Kit: 0000-660-0800 Dual Dog Kit w/ Chain Catch: 1135-650-7750 Smaller Chain Catcher: 1122-650-7700
RAPTOR System Final Test - Live Fire
มุมมอง 862 ปีที่แล้ว
I finished this hit sensing target prototype back in 2015 for my senior project for my Computer and Electrical Engineering degree. In this video I am testing the hit sensing capabilities of the target with two different types of ammo.
My first 3 Gun Competition. I placed 3rd out of about 20 guys!
มุมมอง 842 ปีที่แล้ว
My first 3 Gun Competition. I placed 3rd out of about 20 guys!
How to Reset M-Tronics on MS362C
มุมมอง 64K4 ปีที่แล้ว
The MS362C comes with M-Tronics version 3.0. Other saws that have version 2.0 and 1.0 reset differently and it's confusing. I bought this saw off of Ebay, once used, with no user manual so I took to the internet to try and figure out how to reset this saw. I couldn't find a single video that explained this properly, and the user manual I found for my saw online was extremely confusing. Since th...
Hattiesburg/Petal Tornado Damage Drone Footage
มุมมอง 5976 ปีที่แล้ว
Hattiesburg/Petal Tornado Damage Drone Footage
RAPTOR System RF Remote Prototype 1 Test
มุมมอง 1989 ปีที่แล้ว
RAPTOR System RF Remote Prototype 1 Test
RAPTOR System Remote with OLED Screen (Prototype)
มุมมอง 689 ปีที่แล้ว
RAPTOR System Remote with OLED Screen (Prototype)
RAPTOR System (Pop-up Target) RF Remote
มุมมอง 5389 ปีที่แล้ว
RAPTOR System (Pop-up Target) RF Remote
Wireless Arduino to Arduino with APC220 RF Modules
มุมมอง 14K9 ปีที่แล้ว
Wireless Arduino to Arduino with APC220 RF Modules
FULL Game of Thrones Theme Song on Arduino
มุมมอง 18K9 ปีที่แล้ว
FULL Game of Thrones Theme Song on Arduino
Playing 'Sexy When You Do That' with Arduino
มุมมอง 3569 ปีที่แล้ว
Playing 'Sexy When You Do That' with Arduino
Playing 'Game of Thrones Theme Song' with Arduino
มุมมอง 4989 ปีที่แล้ว
Playing 'Game of Thrones Theme Song' with Arduino
Thank you so much. I never had a problem with mine until a few days ago- didn't want to start after running warm. This totally solved the problem.
Being a firewood cutter only by the trailer size 4×6 foot , do u think a 362 Sthilsaw is sufficient even coming across some big logs on the ground at times which I don't like leaving behind ?? Or should I opt for the 400 saw ?? Please advise, I thank you in advance Gunter
Had the 400 been out when I bought this saw I would have gone with the 400. It’s lighter for basically the same horsepower.
How to unaseble
Hello sur quel site tu achètes le silencieux ?
Here's and idea: Don't buy an M-tronic saw. Buy a saw with a carburetor -- one you can adjust.
thankyou it works ,just saved me ££££££££££
I have older MS 390 I bought in 2011 trying to find a straight shot for it but I can’t find it on the website. Do they make one for it?
Doesn't look like it, but you could message him via his contact page on his website at eganperformancsaws and he should get back with you on it.
@@ChainsawFarmer1 I’ll give it a shot lol thanks
It depends on the software in the saw. 2.0 and below has one way and 2.1 and above does it another way. It should be on a label on your saw marked what software you have.
"should" be on the label on the brake
Let it run 90seconds that's a minute and a half turn-off next time you start it will reset itself.
Only on the older Saws I believe mine I had to run wide open shut off made a big difference
The dealer told me? 1min full trottele.
Thank you. I could not understand the Owner's Manual. You clarified it nicely. One thing you did not mention is the decompression valve. In one spot in the Owner's Manual it says "you must press the (decompression valve) before every starting attempt." However, the Manual never again mentions the decompression valve in all its starting instructions. When should I use the decompression valve?
Never use that thing. Take it out and plug the hole off, you buy the pluk from a saw dealer. They tend to be leaking after a while,and you loose power over time.. First thing i will do,when getting a new saw and it have a decomp valve is plugging it off
Thanks for the clarity.
Thang you for the info you made it very clear.
awesome thanks
total waste of money and it's way to loud...
It's louder, but I wear muffs so it doesn't matter to me. I like the extra power personally. It's a good trade off.
@@ChainsawFarmer1 u get more power if u make the pipe right.
@@julianlaustsen1991 ok prove it, and does your said pipe have a spark screen and cost less than 70 dollars??
@@funkysawmanwright5077 why would u want a spark screen? I've always ran without one and no forest fires here...
@@julianlaustsen1991 required by local state and federal laws in Idaho. 3000 dollar fine if caught running without. And they do have law enforcement driving the mountain roads looking for loggers and firewood cutters that are non compliant
That might work if you can get it started.
I just ordered some for my saws my neighbor got me hooked on them they really do improve overall performance
At least your neighbor is understanding, my got are they loud!
I'm gonna try this. Mine seems underpowered
I put a set of West Coast Saw 3 point fangs on my work saws.
Do you have to adjust the carb
Yes, you'll need to after installation.
Had one, hated it. End of story.
Damn get that bit for a drill !
I know right...
Actually, there are instruction on internet (TH-cam), on how to reset Mtronic... th-cam.com/video/ccI8yEAjTMg/w-d-xo.html
new subscriber
Do you plug off the stock exhaust hole. That would make two holes
Painful to watch to struggling with the screws
"A little high on my back cut" m8 that was a beautiful cut!!!! I would use the dogs a little bit more while felling other than that your bang on m8
Thanks man!
Thank you! It works!! Going by the sound it makes while holding it wide open it idols down much sooner than 35 seconds, but I held it for the entire time and it runs great.
Thanks much
Dangerous
Thanks!
I'm considering the purchase of a new 362CM. I'm a farmer forester.
I'll be honest, if the 400CM was out when I bought this saw I would have gone that route. Almost identical weight and price, but has more power.
@@ChainsawFarmer1 I know what you mean but I have a 460 and 660. I have a 261CM for daily use but the 460 is too heavy to use for limbing and so I will get a 362 and use a 28 inch light bar for limbing.
@@adelarsen9776 Well in that case you'll love it! It's my favorite saw. I put a 20" light bar on mine for limbing and the power output combined with that short light bar is awesome. Sometimes I'll switch it out with a 25" light if I'm doing bigger stuff.
@@ChainsawFarmer1 Excellent. Thank you. I will buy a 362CM. All the best and good health to you.
I know it helped me
Thanks for providing this information!What does the M-Tronics do? And what about any other tuning? You put the Egan Straight Shot on the 362C but added nothing about the tuning you did.
I just did a normal retune with the same process in this video after the egan and the saw adapted to it.
It’s got electronics that adjust the carb. This is the process for setting those electronic
That is the returne . You actually do get something when u pay the extra money for a nice saw I did this after a tune up kit runs like it did new
Does pointing the exhaust at the chain and oiling port heat things up?A hot chain wears faster and heated oil is gonna flow faster. What about a full wrap handle bar, is it gonna heat that up too ?
I just took a dremal and almost doubled my 362c exhaust sounds great and runs much better. I have a full wrap handle. You can take the screen out to open the port then put it back in.
well, it is in the manual actually
excelente trabajo y gracias por compartir el codigo.
【from Hipa】Would you like to test my parts for your equipment?thank you.
Awesome job！
Put my straight shot on my 362 yesterday haven't ran it on the tach yet. I have cut some wood though and the saw definitely feels stronger!
Thanks bud, you refamiliarize me with this stupid bad ass chainsaw that I just bought for 960 bucks new LOL😎🛠⚒🌎🛡👀
The problem is you read about the mtronic 2.0 . Your saw has the 3.0 mtronic .
I know for sure I will never buy those! Thanks for the info.
I would feel horrible ripping a saw full throttle after 30 seconds, for 35 seconds. I got the 400c and never had do do anything of a sort. Everyday of use clean air filter and clean plug, you wont have any issues!
Yeah I didn't enjoy that when it doubled idol, I bought saw that was used twice, it runs much stronger now.
Do you live In cold climate that's where it may factor in for sure
【from HIPA】Would you like to test my parts for your equipment?thank you.
Nice job!
Thanks!
@@ChainsawFarmer1 are you interested in testing my parts?Thanks.
Idk why your saw blew up, maybe holding it wide open that long….
It didn't blow up, it's running fine.
More useless electronic garbage.
hello, how many meters is there in the indoor area?
I'm not sure indoors, but outdoors I was able to get about 900 meters line of sight and still work it.
@@ChainsawFarmer1 ok thank you very much.
@@ChainsawFarmer1 it could only work about 40 meters long in door, do i have to change any settings.
Yer i wish stihl would be more clear about how to start this saw, did the 90 sec stuff but seems thats for older m tronic. Will reset, but wish dealers and stihl be better at this. An give a pro saw two spikes cos one small one bit shit, its a pro saw for pro work so just make it. But yer winge but nice saw but for the money yer