วีดีโอ

Thank you

Thank you, this saved lot of plumber fee 😊

This really helped

Thank you! Very helpful.

Thank you for sharing this solution, it’s really helpful and appreciated your help!

Thank you , it worked.

OK so this may sound gross but I was able to get my mouth over the weep hole and blow into it and it did the same thing as this video shows

Thanks. This fixed my problem, and I wouldn't have thought about that without your help.

Fixed my problem! Thank you!

Thanks SO MUCH for your detailed video. I followed what you did and that was my exact problem. - it was an quick, easy fix!. Yay!!! I tried blowing air in the hole as well and it didn't do anything. So happy I didn't have to call a plumber.

Thank you! Help solve my issue.

This Mama was able to clear it just like you said. Thank you so much!

It worked!!!

Super thanks 👍

Thank you so much! You saved me so much time!

Is there a one way flow valve that would prevent garbage disposal back wash into RO drain line? I have exact same issue… Plumber didn’t resolve it

Thank you sir! I will give it a try!

Had the same issue. I used a large surenge to suck out all the gunk from the hose.

Worked like a charm and I can return the new tap I ordered. Thanks again!

Thank You for posting this video! It was exactly what needed, plus it was a simple fix.

How often should we do this? Twice this year we have been in our basement and hear dripping noises to come upstairs and find water EVERYWHERE. I knew it was a clogged drain line based on extensive research lol and it fixed the issue but we never know when it’ll happen.

Thanks a lot. This was super helpful. Hope I could find this before removing the faucet. Now I am having hard time tightening it up.

Thanks for the video my dude

Hey man fix my too thank you so much for posting this video

This also raises a concern: is the water from the filter system that nasty? Like all dirt and minerals? Mine came out BLACK. NASTY.

I checked there was no clogging at the end. Check the red tub for water restrictions, no issue found. I was about to give up then a thought crossed my mind, I blew the blue tube with high air pressure and the disgusting stuffs came out from the hole behind the faucet. Nasty. So it’s clog right at the faucet end. At least it stop leaking now. 😅

You can also use a metal hanger to unclog the line.

You sir are a life saver! thank you so much for posting this video.

Super helpful, thanks so much man

Move the drain line away from the disposal and shorten the blue line so the debris can't sit in the low spot.

Man, I just special ordered a replacement Air Gap faucet because Menard's said thats what it was and now it's fixed. Going to keep the part, just in case though.

Had this problem except it wasn’t fixing it so I took apart my ptrap it had a little bit of debris so I took a straw cleaner and put it in the port on the drain and it seemed to work

Thank you, such a helpful video and easy fix.

Does the RO system just constantly drain water like that? I noticed you didn't have the RO faucet on but it was still draining water?

You saved my day. Thank you for posting this video.

Just installed and its doing it with no clogging its brand new what else can it be?

Your drain is too low, should be a couple inches above you p-trap

Worked like charm! Thank you

my problem was slightly different ...had this same problem of water leaking out........ tried this and a couple other things but what worked for me was pulling the drain hose out from that blue fitting thing on drain then letting it hang used a air compressor at 30 psi and pushed air from the vent on the faucet and it spit out a chunk of gunk on the floor and bam works flawlessly now!

Thank you so much I solve my problem. It worked fine at the AO smith system.

Thank you Sir!!

Thank you Ali, I should have found your video before I took apart the whole system.

Very Helpful. Thank you

Thanks, your video helped me out!

Thank you. This solved the issue. You saved me a headache

If you just hooked it up, and water is shooting out of the weep hole instead of the faucet, it's because you have the two large lines reversed.

Thank you so much for posting this! Could not have figured this out on my own. Seems like this solution should be included in the manual as a fix.

Just the tip I needed! Thank you.

Heck yeah brother thank you

Amazing! It worked like a charm. Thank you!