- 115
- 501 498
4WDTrek
United States
เข้าร่วมเมื่อ 29 ก.ค. 2010
Pavement is no fun, lets engage that 4 wheel drive!
Hey! I'm Doug from the PNW. I enjoy getting out and away from the hustle and bustle of the city and see the things that most people cannot get to.
Along these off road adventures, you will see us in a variety of rigs including Jeeps, Toyotas, Samurais and even the rare Mitsubishi Montero.
We will be building these rigs together and using them for what they are made for!
Come along with me on these journeys with my friends and my Jeep Wrangler and see the road less traveled!
Hey! I'm Doug from the PNW. I enjoy getting out and away from the hustle and bustle of the city and see the things that most people cannot get to.
Along these off road adventures, you will see us in a variety of rigs including Jeeps, Toyotas, Samurais and even the rare Mitsubishi Montero.
We will be building these rigs together and using them for what they are made for!
Come along with me on these journeys with my friends and my Jeep Wrangler and see the road less traveled!
Can My Jeep Keep Up With A Buggy?
In this video, I am with Brian at Reiter ORV park in Washington.
I'm on 40 inch Milestar Patagonia M/T02 tires, Dirtylife beadlock wheels and one ton truck axles with Yukon gear and axle gears.
Buggy is built more than me by far!
briandrivesslow
I'm on 40 inch Milestar Patagonia M/T02 tires, Dirtylife beadlock wheels and one ton truck axles with Yukon gear and axle gears.
Buggy is built more than me by far!
briandrivesslow
มุมมอง: 308
วีดีโอ
Kitchen Conversion AROUND FRIDGE In A Skoolie: Superbus Episode 10
มุมมอง 182หลายเดือนก่อน
In this episode, I built a full kitchen around my ICECO Fridge system. I started with placing the fridge on the floor and built everything based off that. I believe the most important thing about the interior of a skoolie or an RV is the fridge, so why not go for the best?! Link to the fridge: amzn.to/3RbfK3P Drawer slides: amzn.to/3X4WDMk Wood Glue: amzn.to/3wZN9rb
EASY DIY Solar And Electrical In Skoolie: Superbus Episode 9
มุมมอง 2724 หลายเดือนก่อน
In this video, I install Solar panels, charge controller, inverter, breaker panel and all the wiring for inside of the bus. I am using 12v for the lights and 110v for everything else. Renogy inverter - amzn.to/3TuZx9J Renogy solar panels - amzn.to/43yZzlv Renogy Charge controller - amzn.to/43NxreV Renogy DC-DC charger - amzn.to/43zdAzL 12v light switches - amzn.to/3IPjJOT 12v bus bar - amzn.to/...
FINALLY Hard Top Leak Fix UNDER $10! Jeep Wrangler JK
มุมมอง 2.3K5 หลายเดือนก่อน
Have you had a leak in your hard top and can't figure out why? This fix is SUPER easy and cheap to do. This fix will fix about 95% of all leaks. This works for all Jeep Wrangler JK's and JKU's. Jeep Wrangler hard top leak Foam seal pieces to buy: amzn.to/3T1RxOA
ZERO EXPERIENCE Custom Furniture Inside Skoolie: Superbus Episode 8
มุมมอง 8095 หลายเดือนก่อน
In this episode of the SuperBus, I build the couch and the bed from scratch. I have never done any wood working in my life. Everything I learn about wood working was in this build right here. Brother's Intagram: noboltsleftbehind Brother's TH-cam: th-cam.com/users/noboltsleftbehind
Fixing The TERRIBLE Skoolie Lighting: The Superbus Episode 7
มุมมอง 6576 หลายเดือนก่อน
In this episode, I replace ALL the exterior lights, some for safety, some for fun! All lights excluding the side marker lights are Auxbeam lights. Headlights - amzn.to/48tsJ7e Spot Lights - auxbeam.com/4WDT1/360-ULTRA 15% off code:4WDT1 auxbeam.com/4WDT2/B21 15% off code:4WDT2
THE EASY WAY Flooring And Insulation In Skoolie: The Superbus Episode 6
มุมมอง 4628 หลายเดือนก่อน
Spray Foam is over rated! I insulate the bus with all foam board insulation. The foam board insulation for the flooring is 2 inch pink Extruded Polystyrene (XPS) Rigid Foam board. Used 1/2 inch OSB plyboard over the top of the 2 inch foam board on the floor. Walls I used 1 1/2 inch R-Tech expanded polystyrene (EPS) core foam board. Glue used for flooring: amzn.to/3Rhd3hq Ryobi Caulk Gun: amzn.t...
What Is SEMA REALLY Like?
มุมมอง 9288 หลายเดือนก่อน
Have you ever wanted to know what SEMA was REALLY like? I take you through some of the wild and crazy things you will find at SEMA. Met and rode with Tanner Foust, Chris Polvoorde and watched Aaron Colton on his motorcycle. Connected with a lot of companies to check out their gear and met with some fellow TH-cam people including Marco from Ovrlndx. Had a blast! Check out mPower lights! Best off...
CRAZY BUILDS OF SEMA SHOW 2023 II Day 3
มุมมอง 1.3K8 หลายเดือนก่อน
Hey all! Wandering around SEMA in Las Vegas is WILD! I filmed all these awesome rigs to give you a rough idea of what all you can see!
WILD Builds Of SEMA SHOW 2023 II Day 2
มุมมอง 2.7K8 หลายเดือนก่อน
Hey all! Wandering around SEMA in Las Vegas is WILD! I filmed all these awesome rigs to give you a rough idea of what all you can see!
SEMA 2023 DAY 1 HIGHLIGHTS
มุมมอง 1.3K8 หลายเดือนก่อน
This video, I wandered around SEMA on day one in 2023. These are some of the highlights of the day.
Roll On Paint! CAN IT LOOK GOOD?: The Superbus Episode 5
มุมมอง 6738 หลายเดือนก่อน
In this video, I used roll on paint to get rid of that terrible yellow from the school bus. This is my 2005 International school bus with DT466E engine and MD3060 Alison transmission. I cut the rear half off to park my jeep on it. Pop Rivet Gun: amzn.to/40h3u4N Ryobi Orbital Sander: amzn.to/40mUSd5 5" Sanding discs: amzn.to/3FzQDkH White Rustoleum paint: amzn.to/3FxCm8p Sand Rustoleum paint: am...
Jeep ON School Bus For The FIRST TIME!: The Superbus Episode 4
มุมมอง 1.2K9 หลายเดือนก่อน
In this video, I take my 2012 Jeep Wrangler Unlimited and park it on the rear flat bed section of my 2005 International school bus. In the previous videos, I did major deconstruction and rebuilding of the rear half of the bus to make this work! Ideas from RubiconJK: rubiconjk
FLATBED SCHOOL BUS??: The Superbus Episode 3, Flatbed Schoolie
มุมมอง 2.5K10 หลายเดือนก่อน
In this video, I deconstruct the school bus rear half down to the floor. I then rebuild the rear half back together to haul my jeep on it. If you haven't watched the first two videos in the series, watch them here: Episode 1 - th-cam.com/video/1FzBoIZ47p8/w-d-xo.htmlsi=0YtbEU2hO4aq0pNI Episode 2 - th-cam.com/video/nFw3tqj9TUk/w-d-xo.html If you like the music, check it out on my buddy's Spotify...
Interior DEMOLISH and Rear Heater DELETE: The SUPERBUS Episode 2
มุมมอง 31610 หลายเดือนก่อน
This video, I tear EVERYTHING out of the bus. I take the fully functioning school bus and break everything down and out, down to the metal floor. I also remove the stock heaters for the rear and mid sections of the bus. I did weigh everything I took out of the bus and will have the weight video of the bus, posting at a later date. Music in the video provided by my buddy Matt. Check out his Spot...
Picking Up School Bus UNSEEN FROM AUCTION: The SUPERBUS Episode 1
มุมมอง 69310 หลายเดือนก่อน
Picking Up School Bus UNSEEN FROM AUCTION: The SUPERBUS Episode 1
INDESTRUCTIBLE Rock Lights! And How To Install Them.
มุมมอง 37711 หลายเดือนก่อน
INDESTRUCTIBLE Rock Lights! And How To Install Them.
BROKEN! Easter Jeep Safari Top Of The World: One Ton Swap SHAKE DOWN
มุมมอง 894ปีที่แล้ว
BROKEN! Easter Jeep Safari Top Of The World: One Ton Swap SHAKE DOWN
DIY One Ton Steering: Jeep JKU One Ton Swap Episode 6
มุมมอง 1.3Kปีที่แล้ว
DIY One Ton Steering: Jeep JKU One Ton Swap Episode 6
Super Dana 60 GEARING AND LOCKER DIY: Jeep JKU One Ton Swap Episode 5
มุมมอง 647ปีที่แล้ว
Super Dana 60 GEARING AND LOCKER DIY: Jeep JKU One Ton Swap Episode 5
DIY GEARING 14 Bolt Rear Axle And LOCKER Install: Jeep JKU One Ton Swap Episode 4
มุมมอง 1.5Kปีที่แล้ว
DIY GEARING 14 Bolt Rear Axle And LOCKER Install: Jeep JKU One Ton Swap Episode 4
14 Bolt Axle SHAVE to 13 Bolt Axle: Jeep JKU One Ton Swap Episode 3
มุมมอง 665ปีที่แล้ว
14 Bolt Axle SHAVE to 13 Bolt Axle: Jeep JKU One Ton Swap Episode 3
Welding BARNES 4WD Truss To SUPER Dana 60 and GM 14 Bolt: Jeep JKU One Ton Swap Episode 2
มุมมอง 1.9Kปีที่แล้ว
Welding BARNES 4WD Truss To SUPER Dana 60 and GM 14 Bolt: Jeep JKU One Ton Swap Episode 2
STRIPPING AND SHAVING Super Dana 60 And GM 14 Bolt: Jeep JKU One Ton Swap Episode 1
มุมมอง 3.2Kปีที่แล้ว
STRIPPING AND SHAVING Super Dana 60 And GM 14 Bolt: Jeep JKU One Ton Swap Episode 1
Worlds Largest Offroad Wrecker, HOW BIG IS IT REALLY? Bonus Interview With Matt's Offroad Recovery
มุมมอง 47Kปีที่แล้ว
Worlds Largest Offroad Wrecker, HOW BIG IS IT REALLY? Bonus Interview With Matt's Offroad Recovery
Top 5 Wheelers Of SEMA 2022: WHICH WOULD YOU CHOOSE?!
มุมมอง 2.1Kปีที่แล้ว
Top 5 Wheelers Of SEMA 2022: WHICH WOULD YOU CHOOSE?!
HOONIGAN BURNYARD: Insanely Built Cars Doing Burn Outs At SEMA 2022
มุมมอง 1.3Kปีที่แล้ว
HOONIGAN BURNYARD: Insanely Built Cars Doing Burn Outs At SEMA 2022
SEMA Show 2022 Day 3 Highlights; CRAZY CUSTOM BUILDS - 4k
มุมมอง 2.1Kปีที่แล้ว
SEMA Show 2022 Day 3 Highlights; CRAZY CUSTOM BUILDS - 4k
Duct tape😊
That could work as well. Would work better than anything else!
Just a training trail for the locals to head over to "the good stuff".
The good stuff?? You might need to show me what's up!
How has this gone for you, have you upgraded to 40s? Thoughts on going to the 1.75 over 1.5 stroke?
It has been great on the 40s. I'm not sure if the 1.75 is actually needed or not. My limiting factor currently us the slower response when turning hard one way then back the other way at slow speeds, but I think that's due to the flow rate of the pump. But for l just normal driving and on trails, it works very well.
How about now? Still on the 2nd set or? I was thinking about getting a set but not sure I wanna do this job twice
I actually have changed out to one ton axles since then. From the last I heard, they were still going strong. That was about a year ago however.
I like how you did double the cup holders on the back of the couch
Extra cup holders! Never too many!
I swear, that jumpsuit went on and your whole mood changed😂
🤣
Very helpful video, good explanation.
Glad I could be of some help for you!
Looks like a fun time! Thanks for sharing!
Was a blast! Might have to get you out with me on some trails again soon!
Kinda looks like you should at least look into a Buggy. That thing rocked it.
That means I will HAVE to trailer it. I do enjoy my creature comforts. And with my jeep, I could take you both out wheeling whenever I make it out there!
@@4WDTrek Lotsa great places here for it. I Sure wouldn't turn down the offer. 😁
@@4WDTrek Wouldn't you be able to take it out on your school bus?
Thats the goal! All across the country!
That was fun 😊
Ah, the good ole wench. It's definitely a lifesaver
Gets out of hairy situations! Haha
Walked past your house found the bus saw the TH-cam shits dope
Thanks bud!!
How wide are the fronts? Looking at the hooke 6.2" ones. But may be too much and go with the kbd
Fronts are 8 inches wide.
Do Renegade's need transfer/ diferencial and transmission breather extension tubes while going through deep water/ mud?
I would suggest it highly.
I love my renegade. Little think is a beast
They are extremely surprising for sure! Very capable rigs.
@@4WDTrek We shouldn’t be surprised. At the end of the day they are a Jeep.
@@papabear463 That is very true! Plus, the driver of the renegade is super skilled as well
Well how do you back the gear up
You turn the gear the opposite way to back it up. One way tightens, one way loosens
someone give me the mods you pput on that i want them for my latitude
Haha yeah my buddy has done a great job with that thing. A lot of work has been put into it. It's a beast!
@@4WDTrek can u lemme know the mods please i have a renegade n i want it to be more jeep
@@PhantomClan6.9 shoot me a message via fb or Instagram. I can link you with the owner to get more info
@@4WDTrek whats yo fb
That’s one bad ass toy hauler!
Thanks! Have you watched the rest of the build series??
that Sammy is impressive....
It really is. I need to get back out wheeling with it soon.
Finally an update!
I know right! So much life stuff going on.
yes yes! ice cream sandwiches!
Obviously on some adventures!
Finally! been waiting for this one!
Yes! Been super busy and haven't had time to get stuff done recently. Gotta get back on it!
@@4WDTrek how will power work for the fridge? Is there enough room?
@CJtheRocker I'm running the power through 12v and on its own circuit from the battery. The plug for the side is actually built at a 90 degree angle so it sits more narrow than the handles. I think I'm going to attach a spring part way on the cable so it pulls it up out of the way when sliding back in.
@@4WDTrek ahhh perfection 🤌🤌
ICECO discount codes???
Unfortunately not.
@@4WDTrek dang!
“I did a bunch of math….” What’s new?😂
Mathing always mathing
Uhg video great except you keep mispronouncing naches. It's not nochis. It's pronounced nat-cheese but no T sound. Sorry it's just annoying to us locals when others come in and say it wrong. Love the vieos tho.
Yup. I was told I pronounced it incorrectly a lot already. I learned! Can't wait for it to open back up this year!
Did he still have tractions control and electronic stability control off? It sounds like it is struggling. I haven’t lifted mine renegade or put bigger tires. I always turn off the TC and ESC and put it in manual shift. I do not have the trailhawk though.
I honestly couldn't tell you what settings he had on. I do know it was in a mode where it mimicks 4 low though. It purposefully drops the rpms and spins the tires slower to be more controlled.
Was the Lincoln town car drive by wire and you swapped it to drive by cable?
That is correct. Since I didn't use the town car wiring harness and computer, I had the option with the holley. I'm happy with the decision!
@@4WDTrek so did you just swap the intake and throttle body?
@@devonstimmerman1256 I swapped out the intake manifold as mine was cracked. But I got a BBK throttle body
How did you shorten the axle tube. The explorer is offset about 2 3/4" on one side
I did not shorten it. I left it full length. Haven't had any issues with the set up yet. No clearance issues at stock height.
Awesome video, what brand radiator did you purchase to replace the old one? How has it been holding up?
I think it was a mishimoto one. It was a friend's jeep I did this on. It worked out super well up til the day he sold it. Unsure as to how it is now though. Probably still holding up!
Great and realistic video THANKS FOR SHARING
Glad you enjoyed it! Thanks!
L cameraman, purposely staying off the back of the renegade. I wanna know if my latitude is capable! I didnt see the trailhawk logo on the side, now im just left in confusion.
The renegade is modified a bit. Has a small lift and slightly larger tires. But other than that, it's all driver skill that got him through it all!
I have a small leak that drips into the pocket on the dashboard. I'm searching for info before I tackle the problem. Elsewhere, I have no other leaks. As a new Jeep owner with zero desire to go topless, I put a bead of silicon between the Freedom Top and the back roof. Just enough to cover the exposed seam.
Thats a good idea if you never wish to take your tops off.
Super helpful! Thank you guys
Glad we could be of help!
The trails at tahuya have been greatly improved in the last year. I used to do it in a Ford escort. It’s way more challenging now.
I'm planning on getting back down there and doing an updated video on it.
I currently have both sitting in the garage. Had the 2000 model from new it’s a great drive and very predictable. The new one is very different it’s a great drive but it’s taking some time to get used to.
My biggest thing to get used to was going back to a non electric clutch after the electric one. It's really weird.
Mold?? How does that happen? Not safe dude!
When the tops leak and you don't drive it for a period of time, it can develop mold. But no more mold and no more leaks!
I’m about to set mine up with the ram in pretty much the exact same setup. Which port on the steering box did you run to the stationary side of the psc ram? Would definitely save me some time if I knew before I hook up my lines for first test
Off the top of my head, I don't recall. But I know 100% that whichever I ran in the video, it was backwards.
Front hole (radiator side) went to the stationary on mine.
I bought the same panel the front went real smooth. I used 8/32 machine screws. I now have to tackle the roll panel end. My jeep is a soft top
Nice! Definitely super handy add on!
Safety glasses with flip flops 😂
Haha yeah yeah. At least my eyes won't get chopped off from a broken grinding disc!
Excellent engine choice!
Thank you! It's been a very solid engine so far. Plenty of power, fires right on up and very reliable
Amazing you didn't burn your garage down with the cardboard laying around and the grinding sparks. The surgical masks are bare minimum, should have a real partical filtration mask on.
Thanks for the tip
This video was DIY perfect 👌
You are welcome bud!
My temp gauge not working l replaced the temp sending switch did not fix
Very common first step!
Great video THANKS
Glad I was able to help!
An air arc or carbon arc powered by a 400 amp 3 phase welder will make short work of all that torching and sawing and will keep grinding to a minimum. Its basically a weld eraser
I'll have to look into that. I ended up getting a plasma cutter when I was chopping up the metal body of my school bus I'm building to a toy hauler. Wish I had it for these axles!
I'm shocked they didn't require sleeping the holes
What do you mean by sleeping the holes?
so if my transfer case linkage dosent exist, i should get this?
As long as you have the lever coming through the transmission tunnel from your hand lever, and a transfer case, yes. This will be what you want!
I used to be a jeep guy but I have run naches trail 5-6 times in my side x side it makes the trail a lot easier
Side by sides definitely do things a lot different and faster, that's for sure
Tough trail! Great video!
Thanks bud!
100% bugeye. Small fun GD body, EJ20. Cable throttle, no driving aids. My kind of car.
I do miss my bug eye for sure.
@4WDTrek I'm in a similar spot but I have a VA. Not a terrible car but it's just not like a older subaru
I thought there was no fix for this? I thought it was technically an engine issue?
Nope. Clear out all of the sand and fixes the issue. Might take a lot of flushing as well, but it works!
@@4WDTrek Oh ok. I didn't know that. Thanks
@@7CFlo I also added a coolant filter to filter even more out, just in case some got missed.