วีดีโอ

I use both Calibrated and Calibrated Dark. It depends on what I'm watching.😊

Will this work with a direct drive conversion?

I have a P85QX-J01 and I've noticed that Calibrated has much better darks than calibrated dark. Odd behavior for sure but seems to be flipped from what yours does. I've also noticed that on 'Low' active array, the blacks aren't as dark as on Medium.

Hi, will this work with a Max Neo?

My set has a "backlight" setting that I don't see on yours. Any suggestions for what to set that at?

Easy enough to remember; Red and yellow, black and blue

what's different between sunon and V3?

Do hdr work correctly now

Will this work with the Ender 3 V2 Neo?

Wasn't able to locate the scene to compare picture settings

Bought a used Ender v2, Came with this monstrosity attached to it.. Was looking at it today trying to figure out how to even open it. I have a CR touch coming tomorrow so looks like i'll be taking it somewhat apart.

Is there a remix of this that uses a magnet to hold the front cover closed instead of a screw and its designed to fit the stock hotend for the Ender 3 V2?

Hello, thank you for this video! can i use this fan shroud with 1 normal fan and one blower fan? I want to try this out and later use a noctua fan and 2 more quiet blower fans.

Do you know if this design will accept non-stock hot ends? I have a Phaetus Dragonfly BMS and am having trouble finding a shroud with dual blowers that fits around it. It's 24mm wide.

This video is helpful. Thank you for making and posting it. I have a V2 and will be attempting this work on my own unit based on what you've shown here.

going to see if this fits on an ender 3 neo hotend.

I don't know if I'll get an answer here since the video was over 1 year ago. However, I would like to ask something. I have installed a 12v radial fan, but I also want to install 2 pieces. now I would like to know if you can block 2 ventilation to a connection (like you in the video)? Are both fans still running at full power or are they drawing power from other fans? would be really grateful if someone could tell me.

You got my sub! Thanks man!

This is a great setup and I am working on the same thing at the moment but I was wondering how you connected the fans together? Much appreciated

I've had an issue where the back plate doesn't push onto the 2 original heat sink threads go. I am using an aquila x2 (ender 3 v2 clone) just wondering if u had to hit them on with any force?

Its works whit ender 3 v2 neo ?

Is PLA+ enough to withstand the heat when printing? hows your experience after some time using it?

es compatible con la ender 3?

is the fan on the front the same as the ones cooling the nozzle?

Where do you get the skrews

Model?

the files that you have in the description, do they fit with the CL touch or did you need to modify the model?

Anyone compare this with minimus with stock fan?

hello, I really like your work! I had a question, do I need to buy 2 24v fans or 2 12v fans to cool the nozzle? I would be grateful if you reply. thanks. good work

will this work with a ender 3v2 neo hot end?

Instead of soldering the blower fans together. Fit JST plugs to each fan and on on the wire from the printer, then make a “Y” link lead, and connect the 2 blowers to that and the other end to the printer. That way, if one fan fails, you can just unplug that fan and swap the one out. 😉👍🏻

I installed two fans and wired them correctly and the one fan takes precedence over the other, I have tried other fans, is there something I am missing?

What kind of screws did you use to attach to the blower?

Thanks for the cool design on this printer head. With a tiny bit of modding it works on the Voxelab Aquilla.

This is just what I looking 4 🤗

On the side that didn't print nice, that's because of insufficient cooling on that side. Kinda funny.

Thanks for your very helpful video. Quick question please, with BL or CR touch the prints come out better even if the bed is warped, or still have to level the bed? Thank you

I've been using JST connectors and putting them on everything on my printer, you can make a splitter cable for the blowers, but the good thing about JST connectors is they are the same as what Creality use on the motherboard. No more soldering and cutting wires every time I mod my printer or change a fan.

i have this setup but i used the stock ender 3 fans and now i'm having stringing issues. my retraction distance, speed, and filament temperatured were the same. could it be just the fans?

Nice Job , STL is available ?

Can you give an update on how the fan shroud is holding up? have you reprinted it from pla+. Is it warping being close to the hotend?

I wish it had screw holes for the front fan to make permanent. But looks amazing and looks amazing. Also to tight of a fit for some of the fans I had to make adjustments on a slicer.

Could you leave the link of the piece to place the bl touch? I can't find any that serve me 🙏

love the design of this fan duct, but want to use dual 5015 blower with 4020 front fan cant seem to find a remix of it, would you happen to know where to find one?

This is what I was looking for since have an extra 4010 part fan from the assembly that came with the E3V2. I installed creality's Direct Drive upgrade kit that comes pre--assembled, all I had to do was move my extruder over. I printed the whole thing on PETG, started assembling it, the realized that this wouldn't work with my direct drive set up, it doesn't have the screw holes in the right places nor that rectangular hole in the back behind the Hot End. Now I am making modifications to get it back printing so that I can print another fan shroud kit that actually fits my set up. Thanks for the video.

Thanks for the video. does anyone mind answering what the extra holes around the square in the middle are for?

Thanks so much been looking for a video like this going to be changing my fan to 2 12v for a quite print tomorrow so wish me luck

I love this design and tried it last night… unfortunately I found the airflow for layer cooling to be lacking… compared it side by side with my stock set up and I could feel a ton of air coming from the stock set up. From this I could tell airflow was at best half of stock. That was only trying one fan but stock only has one fan. Either it’s just me or the ducts are just to long and open for the little blower fan.

Nice job man, will try this mod soon.. Question why could you not use the factory heat sink fan?

Will this fit an ender 5