วีดีโอ

Thank you for your comment. Highly innovative and informative. We did years of testing and some things never work. Like printed exhaust/intake shrouds with ducts ( cheap and looks like its working), boxes with in/out ducts, external fans ( only to help air extraction), layers of insulation ( bulky and needs a lot of space) etc. Our design, besides good soundproofing will give you, whats most important for miners is ROI. Box that works under $1000. Others that work are way more expensive and once that dont will cost way less. We say research and use common sense. Good luck with your design, its innovative and will work.

@@litesoundbox647 been looking at those 3d printed schrouds , only a matter of time these end up on a public platform as a downloadable file the endresult is a pretty long machine though , my idea is the same consept but build as a box and standing straight up , should take up a lot less space (less than a meter high and about 32cm wide per side ) , the squirrel fan (not sure if thats the american name , looks like a smailhousing , there used on oilfurnaces amongst other things ) are a little smaller than the tube kind , eazier to mound on one of the walls on the inside of the box and as im running two miners inside one box is going to move 1500 cubic meters of air a minute at full trottle ........ its basicly enough to blow small electric components straight off the hashboards , goin to run it way slower most of the time , the people that sell those schrouds allso found a small add on board that you can connect to the controll board to controll the fanspeed at household voltage box itself should be pretty simple basicly a square columb on 4 small legs with a raised bottom that allso mounts the extraction fan underneath blowing up though a plenum intoo a second floor with the holes for the miners that sit on top hood over the opening in the top that has an airgap all around and slides down over the columb like an upside down box , insulation all around it to get to the miners you lift of that hood all electrics and data run down the top too ...... should work and be quet even without insulation to get a hose on you fit a tighter lid with a mounting flange for the hose

it should be close to inlet temperature as shown on miners interface.

29L 14W 13H

thank you

yes

yes

Our KD5 box on our website will fit KD max

hello, we sell them at litesoundbox.com.

Hello Mody, we sell them at litesoundbox.com

Hello here is Gina from keysminer China, nice to meet you. we can provide first-hand resources of various blockchain miners like Bitmain, IceRiver,Canaan,Innosilicon, MicroBT, Goldshell, Jasminer,etc. Are there any machines you’re interested in recently?

yes, its rated for this application

Hello VP, our video shows high 60C temperature at 50-60F ambient temperatures. It's normal that all miners will run at higher temperatures as we all approach summer and take in account humidity in your area. Key to sound proofing is proper airflow and set up. Some climates require installing of inline fan to help hot summer days.

Sound looses its intensity by distance and broken path, so its much less than 75db

please contact us via website, link works

It was around 60F

Hello Terry, please contact us on our website. We will be happy to help with set up. We are working on proper video set up for our box.

Our Litesound Box is available on our website posted in description of this video.

Our S19 box fits L7 miner. For M30+ please contact us on our website.

Hello Hunter, plese refer to our posted measurements and compare to your miner. contact us through our web site

they are on same side on S19 model

main goal is to keep sufficent airflow to the miner and we do provide necessary set up instructions

Its coming soon, ty

miner itself have 4 fans that circulates and push air out of the ducts.

220 volt

Great to hear that Alejandro, you can get it here. :) litesoundbox.com/products/litesound-box-for-antminer-s19

email iis on website

We do not at this time. Based on its dimensions, the only model that could possibly work would be the S19 box, however it would require modifications to the exhaust frame on your part to air seal the exhaust chamber properly.

we posted 2.5 hour video and miner was stable after mentioned time.

contact us on our website

Just uploaded!

@@litesoundbox647 where?

@@anthuer5355 Our channel, it should be visible now!

Hi Pablo! Our video covering the temperature inside will be live 12/3 12pm PST. :)

@@litesoundbox647 Hi, I could not find this video. Have you released already?

@@luizguilhermezoppi5400 its posted on our channel

runs around 54db

Well our patent was filed in late 2017. Some of those videos you're referring to might be ours when it was still an amateur project. :)

The 2 ducts you see are for the exhaust. The intake for the air coming in is on the slit that you can see in our other video.

Yep!

Yes. All the S19's use the same housing, so the XP will fit right in there!

We are working on a video to show the temperature of the hashboards while the machine is running, but not the intake vs outlet necessarily. We primarily designed this box for indoor use. Using it outdoors would require further protection of the box, but then again that depends what kind of outdoor environment you would place the box in as well.

@@litesoundbox647 would it work in garage where there is no place to air to come from ? And it’s around 85 degrees weather ?

@@mayurpatelable i dont think it will work.

Hi Ant, yes it would. The miner in the box is an S19. You can see our other video to see the decibel reduction range. :)

Hi,sir,we are from China,we have cheaper antminers and gpu cards, we ship it 24h,DHL Delievery them .Are you interested in them? We can give you the price list! Please leave your email:)

6feet away around 55db

its mdf, but only heat source is miner itself. Good question for manufacturer of miners.

Nice! How much space does it take up? Edit: we’re just curious over here lol

@@litesoundbox647 The Grow tent itself is pretty big, roughly 4ft L x 2ft W x 5ft H - and doesn't really impact the sound. Its the $500 of industrial soundproofing lol, which in some places gets 9" thick . If I had some mass-loaded sound proofing to add behind it, it may get even lower. I added a second S19j pro to it, and it went up to 51db (but encountered heat problems.)

So the miner has 2 fans on the back that suck air in. As long as the temp/humidity of the exterior air going in is within the manufacturer’s range for the specific miner, you wouldn’t need to additionally cool it. You would need to make sure that the hot air coming out of the miner is going outside of the room you have your miner in.

Most likely. Fill out the contact form on our website and we'll try and help you determine the sizing.

It will! Link is in the description of the video.

Months. The case is engineered to provide sufficient airflow to the miner and even assist slightly with cooling. The case won’t negatively affect the miner’s temperature, regardless of the exterior air.

I’ll take 2 , let me know please

@@litesoundbox647 What's the temp of chips inside the miner and avg fan RPM speed with this box?

@@sebastiantafreshi4379 We're working on a video to show you that actually, should be out tomorrow.

Hi Paulo, thanks for the question. The inlet is on the right side of the box in this video where you see the cables coming out of. You cannot see it due to the angle here, but you can take a look at our product page on eBay and you should have a better idea of where it is. The box was designed with consistent air flow in mind which is why we don’t suppress it to be quieter.

@@litesoundbox647 link for purchase please

@@Open928 hey, It’s in our description. litesoundbox.com/products/litesound-box-for-antminer-s19

@@litesoundbox647 I like the box but I have the same question. I actually came here because the intake is not that clear on ebay page, it looks like a slit in the bottom of the box from the pics. It would help if you could send the picture of the intake. In addition to that, I think the design may be improved by adding an intake that you can add filter to or extend using ducts as well. E.g. garage environment can be pretty dusty and being able to add filter/intake or lay the duct from the outside would definitely help. It looks like I can make such a modification myself, but would like to see what the intake looks like with the default box please. Otherwise, cool product and the price tag is reasonable to avoid the hassle of doing the research and building one by myself.

@@incognitoam Thanks for the feedback! So the intake slit is on the bottom of the back panel. You can see it on pictures #9 and #10 on eBay or our website. The cables are running through it, if it helps to identify it. If you need exact dimensions to prep for the modification, feel free to contact us through our website ( www.litesoundbox.com )and we can send you the dimensions so you can prep for the modification. Do be careful to make sure that the surface area of your extension intake duct is large enough so the fans aren’t getting unnecessarily overworked. Also thank you for the design feedback. We might try to incorporate modularity for extension into future models, or at least make a guide on how to DIY.

Hi Nathos, S9’s actually have only 1 exhaust fan. You can take a look here: www.newegg.com/p/pl?d=antminer+s9

It's lying on It's side. That's why it looks like sn S9.