วีดีโอ

Mr Frank do you have a video or info on how to interconnect all of them please?.. Mine are connected only w white & black... no sure if i have to connect the red wire as well ... ANY HELP PLEASE

The main thing that I want to see how you connect the green line inside the box and how it looks like after connecting. But you cut it out the main part.

Does the green light always need to be on? I installed three detectors today and only one green light is on, other two don't. What to do? Please help.

I had one fail and it was the scariest noise ever. Trying to turn it off was horrifying. I was trying to read instructions while it was strobing at me

Just bought one brand new today and the self propelled belt broke In the first few passes. My guess is it was dry rotted from sitting in the box or something but do you know what kind of belt that is to replace it?

I had one in the guest room that was going off because the outside humidity was like 85%, plus a bathtub that wouldn't drain so I just let the water evaporate and also the fan in the bathroom was broken. It went off once every week. I had an exam the next day after it went off at 2:30 in the morning. We fixed the fan and the bathtub and made sure to run the air conditioner at night, and have the fan set on constant. Hasn't happened since.

I have the same exact model and same problem. A few days ago, I checked everything you did and found no blockages or any freezing. Today I will check to see if it's level Thanks!.

I like to use Tapcons instead of Ramsets into concrete slabs. Sure, it requires a masonry bit and drilling but they are fast and secure.

I didn’t have the leveling problem you had. But I was able to figure out where the clogged drain hole is from watching your video. The owners manual wasn’t helpful at all. Thank you!

How much water should be in the tank

I installed mine but it doesnt trigger the others :(

4:43 shows you don't have a neutral wire. Their installation instruction shows you don't need a white wire pig-tail as in 9:23 It's under "Identify your wires (most common shown)"

Use sandpaper for metal, not sandpaper for wood.😅

I'm no mechanic whatsoever. Your video helped me fix my mom's (same) Lawnmower. Especially the tip about putting oil on spark plug. Thank You!🙌🏾

Every time I have to do this, I watch your video. Thank you for this!

Those mowers has an insane amount of torque

Why is there so many wrinkles in the bottom and sides of inside of tube?

Did you drill screws in at new locations and leave the existing screws that were sheared off in place?

It's more effort, but there is a cleaner and sturdier way: attach the new studs flush to the old studs (with NO drywall in-between the old and new wood.. like the framing would be if it were built this way originally). The problem is over time the drywall will crush, and even if it does not fall out, there will be void space allowing the new framing to "flex" (just imagine children bumping into the walls hard, and now you have huge cracks in the new drywall). You could just use the razor and chisel to remove old drywall the same way you removed the carpet. If you ARE going to do it this way, then at least use long decking screws to attach the new framing through the old drywall into the old framing. Nails that are not flush will come loose, and the drywall you sandwich will compress over time. But the screws won't allow any flex, and if needed you can tighten them.

Really good video - Frank's step by step safe explanations were very helpful - thanks again - it was the exact same model of Philips toaster for me which made it easy to follow. I was able to fix it by cleaning the 2 pairs rond contacts with sandpaper. Little more problems for me to remove the black plastic handle and the rond 1 to 5 controller. The trick was pry it gently on one side and the other. Thanks again for extending the life of this small morning appliance!

Thanks! My system is saying our salt is low, but there is plenty of salt. Any idea what is going on?

How you know which area is the actual problem is when you turn off?

My computer LED screen display won't light up. The unit has power, but the screen won't work.

Bougie merk en nummer

Thanks for doing the video. I completely forgot what to do after adding the salt. Your video saved me aloof of time.

Thanks Frank very helpful video

Thank God for fast forward !!! Just for shear pins ?????)

Thanks very helpful. All plate screws level not up.

is it normal that it wont completely shut off? like the blue indiglow dims out but its lcd backlit display is constantly on.. ? that kills the battery.... and when plugged in it just alternates 14.1 - 14.2 top bar always flashes and never shuts off on its own.. I unplug it drops quickly to 12.9v and sits there and eventually next day drops to 12.7v and have charge it again... is this normal??? or do i have a dud.?

Hi thanks for your review. I liked shared and subscribed I have one. Please would you do a servicing video for this model its the best lawnmower I've ever used❤ Do you still have this model? Thanks also for sharing we appreciate you all you've been doing.

They should scrap the lead acid battery and go with Lithium battery

Nice video thanks

Can u please show how to remove it from roof for replacement?

Also replacement batteries are available to restore charger to new. I have one battery pack lasted 6 years then it needed a new battery with charging every 6 months.

All batteries will drain completely in 4 to 6 months . This is why people don't realize they have to recharge every 3 to4 months. So if you let your car battery sit it will drain down to point of not starting a truck or car

Thanks for the video worked out well

Hi Frank , I have multiple alarms in the house ( each of my rooms) they all went off and it was a false alarm. How do I identify which one is the faulty alarm and needs to be replaced?

I am in Canada as well. Legally speaking, can you replace these switches as a homeowner yourself without the need for a licensed electrician to do the job?

Good work , trying to consider all possibilities before fixing , thanks

Omg he said if he can do it so can I, thanks Frank!!!

Thx for the video…I’m gonna check to see if mines is leveled

I believe we have the same exact refrigerator and I’m having the same issue. Called the repair man and he couldn’t fix it because my model number is gone off refrigerator

So, we spent about 8 minutes of our precious lives watching your video, then towards the end of it, you failed to show us how the strobe light truly works. I guess you could have recorded that strobing light part when your kid wasn't sleeping or at the daycare center, then you would later stitch that separate video to the rest of the video before posting to the universe on TH-cam. ....Now, the main question is how do you compensate us for our valuable and precious time???🤔 I will not subscribe. Thanks.

Need help programing. Do. Not see model no.

Thx very helpful!!

Will try to level it could be the problem every thing is clear

Wouldn’t work… idk what I did wrong lol

You are an absolute king thank you

Hi Frank, I bought the same as yours but it was bought just three years ago but it kept chirp sound in every 30 seconds then I thought its battery was weak the I took it off ceiling in order to replace battery but I cannot see where to replace battery. Only way is take off cover but I cannot open the cover because screw is not star head to crew off . I look into my tool box with 32 pieces of head crew but no one fit to crew off to open the cover. Could you tell me that this model is not designed for replace battery but to call their customer service for replacement whole fire alarm? Thank you

Did a great job explaining how to do this..! Perfect..!👍👍👌👌