วีดีโอ

Clr if it won't ruin the glass?

An empty trailer to a loaded trailer is totally different... I've driven the tesla semi and it sucks so bad.

you can hear an announcement telling passengers to walk to baggage claim over the A-bridge

you can install a active balance

How were you able to tighten the bolts and nut after the first set of cells tabs are installed? The other.tabs will be blocking access to the tabs

Hi what is your battery pack specs?

Instead of a 12v battery for your low voltage side you can just use a dc-dc filter to step down the voltage.

Very curious what range you attain and how much power that 8k hub motor really manages to reliably deliver... this is extreamly close to the 1985 VF750C build I want to one day do...

How much did it cost to build the frame thru PCBWay?

It’s going to be out of battery after that pull, also there isn’t any protection between the driver and what you hit

WD40 or any other household lube would work as cutting oil in a pinch. Engine oil from your car's dipstick would have saved your bits... Think outside the box brother. I have been following this build. Get it done already!!! Hope all is well man, take it easy.

Just curious as far as what I should expect budgeting for a battery of this caliber, is it hundreds or thousands of dollars?

Sweet nice vid

Can it hold the position?

My car contacts are clean. My problem is the supercharger connectors. Super charger cable contacts are filthy.

why not show everyone what the oil looked like after a million miles on the gears. lol

You just saved me big time. I only had 20 miles left. I was in the middle of Barstow. I needed to charge my Tesla and it would not charge. I used the last few miles I had to go to Home Depot to get the cleaner and to go to a dollar store to get the Q-tips. I went back to the Tesla charger and only had 3 miles remaining. I triedeverything you showed in the video and it worked no thanks to Tesla Service, which was closed when I called the number. Thanks so much for your help. Amazing.

Hello

Cut the Zipp ties so u can use them again they just shorter if you don't cut behind the zip

🎉

Wonderful video

Less is more ;) , you can overkill anything , but maybe you only get some extra cleaning up excess some time later.

I got the tesla cable clip, i like to stow away the handle from things like rain and stuff, i keep mine on a wall outside with a 240v plug

What’s the discharge rate on those

working up a mud...

Just quick question will this fix my car because it charges and stops and when I plug it back in it charges but it does it continuously

Nice can you 3d print genius cp v2 frame how much please

Great job!

You can use tow mode to release the parking brake.

Both Climate and Defrost heats up the battery

hu - just more additional weight on the top, let the printer swing.... ;-) I guess a hose would do the trick to raise the filament to the top... or a shelf...

The skids, tail and tail fin would be nice to have in a high visibility color if the 3d printed frame is too heavy. I dont have this heli, but I'm wondering if these items fit the stock main frame.

Thanks for the video. What the exactly model number of those cells?

I’m proud of you buddy

Olá, qual produto você usou pra tirar a cola e separar as células? Se puder responder agradeço!!

You can design for metal printers and use a AL pipe to go the rear rotor, thus reducing number of parts to only a few!

Even simple fix for now: set the screen to 50 % brightness and turn auto brightness off. No need for this jumbo solution

On a 200 mile trip I was driving “late” for 32 minutes and my safety score for the day ended up at 78…that was the only ding, 12% late night driving. Tesla insurance is a scam.

👏👏👏👏👏

Brilliant design, thanks for sharing

Hello Demian! Interesting experiment, I appreciate it! The weight of one blade is as much as 18 grams! This is a lot for this class. This increases the load on the motor, which leads to a significant reduction in flight time! Another problem is strength, how strong are they compared to the original ones, if you say that they are much more fragile than the original ones! So, what is the price of one set? The only option is to make a matrix from which to cut carbon fiber blades, but this requires certain skills, thank you!

They don't sound all that great.

With resin printing being more accessible, it could be interesting to see how winglets or some kind of small guiding ripples over the blade change the flying behaviour

Skills. Nice.

Looks amazing!

Hey partner, I'm from Brazil, I'm very interested in doing one of these, could you give me your contact details or something so we can talk about it.

The vibration will be a killer in a hub based motor. So much more amplified than when central in the bike frame base. Best of luck.

nice job. what about the weight in comparison to CF frame?

tail boom and baldes on rezin 🤔

Hello Demian! The details look very nice! How much has your weight increased? Interested in durability? And will you start printing trunnions, a hub and a swashplate? This will be a real challenge!