วีดีโอ

Thanks for the video, going to replace the bulbs in my daughter's car this afternoon.

Thanks for the very helpful video. Let's be honest; it's not a nice and easy job is it? Real question: why do they keep popping? What's the actual cause?

Thanks, out of interest, what is the green block below for? Looks like a light fitting of some kind?

I thought the drl was the lower separate bulb with the green cap in your video its lower than the main assembly.

Really well explained. Thank you!

Great Video Mr oily Rag , very informative and very clear instructions thank for taking time to do these videos so helpful 👍

What would you do if the lock has been tampered with and the original key doesn't even work ??

Just tried this and unfortunately broke the lockimg tabs on the bulbholder. Any ideas how i can fix or where to find a spare

Many thanks sir.

What's the green connector below please?

Thx from Poland for this handy film

Thank you so much. My father was getting upset about my car, luckily I saw your video you saved my afternoon and my ears. We're watching you from the France 🇫🇷

What's your Fiat500's reg plate?How old is it?

Excellent video and so nice to part that knowledge about the jacking points.

Would you be able to advise how lower lamp is adjusted lower please as high beam is far too high....

thanks for this video, I have just done one of my wife's - it was straightforward after seeing this. I did remove the wheel though to give better access, allowing me to get my head inside the wheel arch for a better look

Thanks amigo

Thanks for this. Any idea how to remove where we’ve snapped half the key off inside the lock! :(

My hands are too big for this job so I take the wheel off. My left bulb blows frequently but my right never does. Mystery!

Great video I recently changed the bulb on a friend’s car it was a Sid of a job I did it exactly how you did it I did after I done it think it would be easier to remove the headlight housing

whats the name of the small light below the headlamp. o thought that was the running light as it comes on during the day

looks like you are changing the head light rather the running light

Great video & camera work , appreciate the jack info 👍🇬🇧

It looks easier to take off the bumper lol

Just bought my daughter one of these and want to fit LED bulbs instead of original filament type, anyone know if these cars have a CAN-BUS system? Want to swap the number plate bulbs for LED too.

Thank you. really appreciated.

WARNING: OK I love TH-cam videos like this but sometimes they can lead you astray. I have a Fiat 500L popstar (2015) and there were some differences to that in the video that got me into trouble. 1) inspection flap removal This is secured by two Philips screws. It is confusing as they just seem to keep turning. I found out they are inserted into plastic lugs that widen on tightening. So for removal, they only have to be partially undone before pulling the flap out. 2) rubber cap is the same. 3) It's a different smaller bulb...I tried pulling it out and it shattered leaving some stuck in the fitting. I later found out the correct bulb for this car is smaller and is supplied ALREADY INSERTED INTO THE FITTING so the bulb with the fitting need to be pulled out as one unit. To add insult to injury the bulb I broke seemed to be fine (as in the elements weren't burnt out) and of course, after fitting the new one; no luck. Guess there must be a loose connection somewhere else...

I've bought a bulb and hit a hurdle at the first step. On my car the access flap (ooer) is held in place with Philips screws not a clip and they have been worn down prob by the previous owner...can't get one out at the moment. (BTW if you have the same a 'stubby' screwdriver is needed due to the wheel being in the way)

Thanks Mr. Rag really appreciate these. Sure looks fiddly but someone posted Halfords charge £20 to fit so I'll give it a go

What a pain this job is - should be a simple task, but has designed-in difficulty, made even more-so if you have sausage fingers! Quick note: Bulb holder turn anti-clockwise to release it. Great vid

That's impressive that you got that off and we're holding a phone at the same time

i dont know your name but i will call you god, thank you so much

What if you dont have the original key? You have to pick it?

8:29 I wrecked that part with the emergency jack. The car should NOT have those arrows, it’s completely counter intuitive.

thank you for the video - I made a small tool out of a piece of conduit pipe. Realised that there is no way to get it out with your hand, unless you have very very tiny hands.

Thanks - used this today👍

Excellent thank you Perfect tutorial

This is a very useful video - so clearly showing what you need to do I could do it by feel rather than sight. Thanks to another video I did it without jacking up the car but simply by turning the wheel. Luckily I have small hands and nothing got stuck, it took me about 5 minutes.

Really helpful video, particularly appreciate the tip for where NOT to jack the car!

Where do I get a master key?

I've had a nightmare with these bulbs. Trouble is locking the bulb holder back in position after replacing the bulb. I've had bulbs fall inside the light unit and the more you fiddle around with these bulbs the looser they become until they stop working. For the time I've spent on mine these last few days I think I'm going to take the bumper off and take the light off so I can access it easier or perhaps take it to Halfords who fit them for around £8.

My old key broke off inside .It WILL NOT come out. I can purchase a new cylinder but how do I get the old one out with the key tip jammed in there.

Spot on thank you

Great Video. Thanks, mate!!!

Really simple explanation - no flannel - thanks!

Great instructive video, especially the tips to avoid disasters.However it’s like working on a Matchbox toy so, being aware of my ineptitude in such mechanical matters, I’ll reluctantly be forking out and getting the garage to assist ! I’d turn a routine task into a financial nightmare…. the space they pack all those electricals into…. joke for home maintenance.

How does it work if you have lost the key

Thank you very helpful!

Iv probably spent over an hour of my life trying to change these bulbs, i get pissed off and then drive to halfords. takes me 2 mins.......

Come sostituire filtro anitacolo