วีดีโอ

@@thebunkreport It fits under the fuse.You'll see how it flips around where it wants to mate.You trim the outer pieces off and it will slip on

@thebunkreport I've been flying this on 4s for a while over 50 flights. There are no issues thus far, and as you said, I do not crank on the throttle. (That's where amp surge happens) 🇺🇲👍

@lewiemotorsports3616 in this video I used a spektrum AR637r. BUT!! I since then about q year ago have switch to FRSKY X20s and in this plane at the moment is an Archer SR8 Plus (stabalized rx) flies even better and rx is only $50 compared to the 125 (tax included) ar637t....light are wired thru existing wiring like ail and flap and gear.

@NoonzAirborneRC oh ok good to know! You think i could get away with an ar630? I never fly too far away and the 630s work great in my viper and futura

@lewiemotorsports3616 NO!!! LJh9bbylife had one in there we were flying the migs. He lost signal in the air. Got it back thrn lost it again on approach. Got signal last minute landed in the dirt....luuuuckyyyyy the battery WILL hide that ar630. You needs antennas

@NoonzAirborneRC oh hell. See this is why I ask the pros! Ar637t/r it is. I have a 637 in my arrows mig, so far so good no signal loss. But more tempted to go the route you went and get the frsky and mate it to my tx16s

@lewiemotorsports3616 if you do frsky. Get the older stab ones. Tx16 doesn't do bc everyone said buy a spektrum d16 accst fyi I don't want ya to waste your money. I love my tx16 it is what melade me go to frsky x20 crazy radio. Wish I would of known about frsky in the beginning, wasting my $ on overpriced radios. Now, the spektrum unlocked 20ch. Where for YEARS U wanted mor ch buy another more expensive radio. Can ya tell I'm not a fan lol

@@nolanxdon6515 under the legal speed 😉👍

@sendit_rc yes it sure does! Also This charger like the lotus can charge "smart spektrum lipos too!

@DavidRLentz-b7i thank you for watching!! I have been adding scale details (3d printing) since I got it here and there. Bombay is scale with racks, only hold 6 bombs tho. In the process of air rushing and detailing the bombadier area. 👍👊🇺🇲

Indeed it is! Should Lil great in the air! 👍🇺🇲👊

@blacksheep933 you do know AG Model makes these. ......right? 🤣

@tnrcpilot6895 in a few days. Doing assembly, time now!

@richardbrown9035 it's perry fancy schmancy my friend 🇺🇲👊

@@ljhobbylife yeah. This one doesn't have a spot person to mount one. But I already designed a pilot with a gimbal hahaha. And a dog for the backseat 😅🤣👊🇺🇲

@@NoonzAirborneRC Oh heck yeah!!

You bet! Have a great weekend Bill! 👊🇺🇲

@@Ogivekrew Bolin RC Airfield

@@NoonzAirborneRC TY

Awesome, thank you and glad it helped! 🇺🇲👊

Thank you sir!! Hope all is well across the pond! Tell Dad I said HIIIIII!! 👊🇺🇲❤️

Thanks for your comment and input. True on adapters, BUT If you have been in the hobby, you have those already, probably too many, lol For. New person, yes, they would have to get adapters or better yet, get hand me downs from ppl at their club! 👍🇺🇲👊

@@TroPicZZR-po2de PNP

@@NoonzAirborneRC I am looking for a beginner plane to fly for my friends because they dont fly rc planes a lot would this be a good plane ?

@TroPicZZR-po2de Flown before? How much? Or this would be your first plane?

@@NoonzAirborneRC I have flown a lot of planes and drones But my friend's usually just fly drones.

mainly fpv drones and professional camera drones

@BatworxAero yes I did. The spar is reallllllllly tight on one wing. It's a 2 piece but I leave them together and in the event I want to take the suv I can take em apart.

@@NoonzAirborneRC Nice! Been flying some composite stuff but want an 'Ugly Stick' jet for stress free fun, have a kit on the way :)

@BatworxAero nice! Just a fyi, my kit was 90%, imho...the fuse wall lounges were cut short, one wing was 3/8 longer on the inside edge towards fuse, ...sits centered doesn't effect flight. 2 formers were offset I Meade new ones. All issues were front the offset zero not being accurate during cutting. The landing gear was the biggest issue for me. The gear recommended was discontinued like forever ago (the stud and bolt on type). HK will never have it. I fashioned mine to accept a jp hobby but had to make a shim with a pin and hole to keep the brakes in a fixed position since there is absolutely no room for a set screw. Gear is also weak. After 10 landings, they flatten bc the weight. They flatten just sitting there under its weight hahahaha, just bend em back. Now, after a while, the aluminum becomes weak. Fix? Buy a replacement aluminum one. I've been researching a composite bracket for the gear. Finding the size and thickness has become the issue. For the size, it is too thick and has no give. Jet runs and flies great. I just keep my eye out for an improvement for the gear

@@NoonzAirborneRC good to know thanks! I think I’m going to glass mine and do a nice paint job

@@BatworxAero definitely doable!

Thanks Bill! Ya welcome to use it anytime! 👊🇺🇲

@westernsharpie Thank you very much! 🇺🇲👊✌️

@@rodinvillarosa2924 landing gear has held up just fines! Even with not so great landings and "desert ops" 🤣 I did have one of the grub screws back out. It holds the lower strut to the upper. No biggy. Blue loctite and locked it down. Happened flight 99 other than that rock solid

@@rodinvillarosa2924 and yes no flaperons needed. I use a 4000mah lipo and weight is great land slow as you seen. A 3300mah lipo would be insane on this thing

@@rja12 they make both style jr style (what u see in this video) and boxer style like on RM..Not sure about the x10 most likely jr style

@@Aero_Rc. 😅 only in RTF....READY TO FIRE 🤣😁

@@NoonzAirborneRCgood one 😂

Understood, yes that was the price at the time of this video. Since then they have upgrades the esc and gave it thrust reverse and many many people asked for it. So price had to go up a little. Hope tour enjoying the jet......wait I KNOW YOUR ENJOYING THE JET 🤣

@@NoonzAirborneRC It's awesome 👌

@SivaSaravanan-y2k this jest was a 8ch spektrum rx at the time. Since then it's been switched out to frsky tdsr10

@@robw8703 None.....28 flights so far 👍🇺🇲👊

@TheAssociation024 same procedure as on a spektrum tx. Remo e the bind plug after binding. Then assign an open ch to a switch and do the stick movement with switch flips and done (for BNF) for others you'll need the Lua script then set it up like you do with a spektrum tx in forward progemming

@binkysquiggums you will enjoy the Libelle. Flies great and can take a beating! I got the kit with all the servos and battery made it east. One thing to note. Be sure to use tape for the canopy. Or when you spin the battery will fly out hahahahaha try soaringusa they got dogs in stock. Be composite and not cheap For cheaper kits this is a good place www.arthobby.com/index.php?page=cat&category=29&sub_category=31

@@NoonzAirborneRC Geez mate, thanks for the link..... Some good alternatives there..... I will let the pocket book recover and then I will grab myself a Skua

Hope your having a great weekend bud! 👍👊🇺🇲

@ricardopr54 that was my plan to come down there. This wasn't a conversion. BH offers the mig-17 as turbine ready just like the big jets. This is one of em. I'll keep you updated on when will be a good day to come out 👍🇺🇲👊 Thanks for the heads up...part one is in the description

@@NoonzAirborneRC Awesome 👌

@binkysquiggums cheap servos work just fine and over 40 flights. Why spend that much? The whole reason to 3d print planes is to keep costs low compared to buying a jet. This jet all in is under 100.00 electronics, rx, lipo, pla. If it goes down cost $8.00 All you said I did. This was the absolute first flight. No one knows rated expo out the gate mysteriously from the get go. She's a hoot to fly! Thanks for watching Even made a 64mm version aswell! 👊🇺🇲👍

@@NoonzAirborneRC No worries mate, glad you got it sorted out......

@ronrempel spektrum is junk. You hunted and commented on this video probably after the taste left in your mouth after they raped your wallet hahahaha GO get yourself off watching a spektrum video you brand jocky troll

@douglindauer7327 1st flat on the bottom in any direction. Can even be put upside down along as it's flat 2nd the lights just blinking crazy and then stop just like the instructions say the do Hope that helps

Many thanks Jeff! Approaching century flights on a lot of aircraft. So doing the review. It's hard to review a plane after a maiden even a few flights. After 100 you know all about the aircraft.

I know! This thing took off 1/3 throttle torq wasn't an issue

Have my timer set for 3:30 always land around 3.85v easy 4 minutes no problem 👍✌️

Thank you! I'm currently making another video on how to balance a tail dragger ✌️👍👊🇺🇲

Yuppers! The jet makes it easy 👍👊🇺🇲

@ordeanmiddleschool thanks for watching! Honestly if you flying off rough grass I'd watch how much reinforcing you do. Reason is if too stiff it will just rip big or bigger chunk out the plane when the gear fail. Sometime I'm successful I can brace in on plywood aa a plate buy then again hence the risk of bigger damage ✌️🇺🇲👊

I've just read another comment on here re mods. My bad for not reading other comments first. Even if you didn't make a vid, did you do a rudder mod and was it successful. Im very interested to hear if it worked as I'd like to do one myself.

@dart2241 rudder worked for landings and long flat turns. Personally wasn't worth all the worm. Landing gear worked great. Take a look at the AF mig 17 90mm I know more expensive than the small guy but it's a real good jet. You can see me flying the pics outta it on my ch. Just something to think about in the future! Thanks for watching! 🇺🇲✌️

@NoonzAirborneRC thanks for getting back to me so soon. I'll def check out the vid you recommend to look at, thank you😊

My pleasure! Thank you Bill 🇺🇲👊

Thank you my friend. Gonna have to make it a point to come down there 👊🇺🇲

@NoonzAirborneRC Indeed 😁😊 We miss flying with you all...😁👍🏾