วีดีโอ

A hidden feature on this light, if you place the battery holder in backwards, you get a nice red light.

If you live in a place where cowards make laws, not even allowed to shoot em with a pellet gun, use fear as a weapon. Get the closest you can to their spot without them knowing and scare the shit out of em. In daytime and at night while they're sleeping. At first, i only did this in daytime and they came back about 10 minutes after i left (i used cameras to monitor their activity), then i did this at night at 2h30 AM also. They don't even sleep on my bloc anymore. Some will probably come back to take their places, but i'll scare the shit out of em also.

For not a lot of money. You can buy the full automatic BB guns. Those are co2 powered and fire about 450 fps. So probably will not rip through the walls.

they make ceramic pellets that dont punch holes in buildings. for next time.

they are great until you drop them once an f the contact spring fail. Gone through three of them. Can't disassemble head

Nice to see how it used to be. Hurricane Opal in '95 forever changed PCB into the chain restaurant and hi rises from the old days. I sure do miss the old days 😔

Obviously before Hurricane Michael which devastated our area

$1500.00 for a side distributor in that kind of shape is a good idea in my opinion not sure how familiar you are with the side distributor but they have a bigger oil pump on the crankshaft and upgraded steering system the generator charges up to 35 amps I think, it also will have.090 inch sleeve the older ones are.040 inch and it has the obvious things that you know like the proof meter etc. So you will easily get your money back out of it and more if you wanted to. But thanks for your video!

what if its not running straight (centered)

Thanks for the vid. Where did you order you new resistor and ignition from? Thank you

Too many issues with the 8V battery in my 41 9N. Bought it with the 8V. Went back to 6V. Still problems. Converted to 12V. No more problems and starts easier. Also, everything I have is 12V so no more issues with using anything.

What are you doing on the carburetor you start to give it more gas it dies on you

Getting in some how! Some where.

what oil do you use in the gearbox?

Very good sir nice job....love a .177cal

Google them.

I have the "GAMO Whisper fusion Mach1" .177 pellet , DEADLY Accurate!

My tractor runs great, and starts right up, but I thought about replacing the distributor cap, and wires. I bought Tisco dist cap and copper wires. That installation did not go well. Hard to describe the wires, but they did not contact the dist. cap well. The tractor ran crappy afterward, and playing with each new wire on the cap, found the #2 wire, pulled up slightly on it, and had better contact, and the tractor ran a little better. But I am not convinced those Tisco wires are well designed and are the best fit for the Tisco dist. cap with the gold metal tips. I replaced the old wires, and the old dist. cap it m tractor ran better than the new parts. How can that be? Next, I will install the points and condenser, perhaps tomorrow.

I have a hammerli 850 cal 177 with valve 16 joules, can I kill pigeon and rabbit?

Oh waht a lovely vehicle she looks cute i feel like driving is it for sale

Is this still setup 6 volt but with the 8.5 volt battery? I have a side mount distributor’50 that the starter won’t fire but runs if I bump start it. It has power to the starter, new start button, new 6 volt battery, new solenoid but wondering if the resistor and order starter switch is bad. It sat in a field abandoned for a few years. I have a new wiring harness, voltage regulator, and some other random parts to install and have some peace of mind. When I got it running it was missing for awhile then started running smoothly but after about a half hour would stall under load.

Nice

Nice Videos， This is really my favorite channle.:) .🌴🌴🌴excellent ☺️☺️☺️👍👌👍👌👍 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 🌴🌴🌴 from:Horseshoe Beach Dixie 167

These old direct drive tractors can be deadly. Pushing in the clutch does nothing because the hog and tires are locked together. They can push you over a Clif . Most do pop out of working gear easily though. This will disconnect the drive and let it turn. Whatever gear it works best in will usually be the most worn and a sharp bump will knock the trans into neutral. Only do this in a emergency . The slipper clutches don't always work

I looked at those brush hogs at Tractor Supply and was wondering if my 1941 Ford 9N tractor could handle it. Now I know. Great video thank you for posting this!😀👍🚜

Where did u get stabilizer and pro part?

Just checked it out today it was so so I was hoping for a better beach

That short piece at the top of the A-arm support. Do you tighten it up or leave it loose to allow flex?

Since it's almost been a year, how's it holding up?

My 9N had an 8 volt battery when I bought it 34 years ago. The tractor would start and die as soon as warm. Suspecting the coil, I went to buy one and the counter guy told me that 8 volt batteries cause nothing but problems witn Ns. New coil, new 6 volt battery. End of odd-ball problems. Just did a complete valve job. Runs like a top.

I’ve searched my eBay and cannot find that seller... can you share the link??