วีดีโอ

Did you check the volume in the windows recording section? It needs to be at 100 like I suggest in the video.

This question doesn't make sense. Don't use headphones, if you don't want to use headphones.

Go to our website, join our discord, upload the recording so I can listen to it.

The ui has changed a lot. But mostly everything is under the actions tab. If you can't see the actions tab right click on any tab and enable the actions tab.

If you add a mic as a source it will only show up in the scenes that source is connected to. If you add it in the settings, like I suggested in this video, it will be a global device and be connected to every scene.

This is highly subjective. I would need to know your budget and goals for the kind of headset to suggest.

A pop filter is ugly, harder to use properly, and will not be as effective as the foam in this use case. For youtube videos and live streamers, using a pop filter is a bad idea. Pop filters are used in recorded studio settings where you can properly control distances from the mic. Live streamers and people talking into a mic for a youtube video is nothing like recording in a controlled studio environment. It's close to a stage performance like a comedian or a band. Have you ever seen a comedian or a band use pop filters on stage? Have you ever seen them use foam?

Try downloading the latest version of OBS studio from the website, don't use Streamlabs

you using usb or xlr??

@@SuccessFitness usb

@@myappealinglife thanks for replying

@@SuccessFitness Of course no problem. I just realized who you are. I watched your journey a few years ago when you did the water and juice fast. Glad to see you're still making content, and are still maintaining your health.

@@myappealinglife i appreciate that! bro that means a lot right now straight up

If my settings in this video didn't work, then likely your mic is bad. It's a pretty low priced item, so it could either be broken or just bad in general. I recommend a q2u if you want a good mic.

@@infinitequality yeah 100% the headset and mic are ass lol i was on a budget but i paid 60$ for it i thought it would atleast be decent

@@17xeno That's on you. Never get a gaming headset. Get a Headphone and a mic separatedly

@@esfera2181 chill saying that like i was blaming someone else for my bad purchase.

Yep, anything that works as a media file in OBS will work. Gifs, audio, video, etc..

This depends on your equipment and computer. This method should be primarily used for sharing and streaming, in which case there won't be a delay to the viewers, but I would use it to play as there will be input lag, a type of delay, though everything will be in sync if you set it up properly. You should continue to play the way you normally would, and just use this to stream, and that will not be out of sync.

Join our discord through the website and I can help you there. Just ask for help in the main chat. :)

Yes. Just add a hotkey under the trigger section.

A new camera would help for sure. For now one thing you can do to help is use a color correction filter after your chroma key filter in OBS. Then use the saturation and tint sliders to try and fix your skin tones.

@@infinitequality Awesome, thanks! I will be trying that for sure. Grabbed 2 of my wife's makeup mirror ring light things and threw em on top of my KRK rokit 5's to use as key lights and it's crazy how much of a difference that made already. Will now just need to dial in those sliders. Never realized the importance of lighting for the camera. Definitely don't need to spend a ton of money to make it look great. Appreciate your knowledge and help!

Try moving the mic around the space and see if it's picking something up. Monitors, TV's, and other devices can cause some static like sounds on many mics. It will get louder or quicker depending on how close it is to the source. My drawing screen makes the most noise and I have to use an mxl-bcd 1 to get rid of the noise. The other reason could be the the XLR cable. Try and move it around, it may be laying on something that's putting out noise, power cables and devices can also cause this depending on the device and cable.

i'll try messing with those things. i have a very quiet pc, barely audible even when sitting right next to it. the cord only comes into contact with the desk and i really have no way around that without laying it on the pc which i imagine will make the sound worse. i did realize getting an aux cable and running an output from the mic reduced the buzzing greatly. not totally sure what the issue is, but it's about 90% resolved and i appreciate the suggestions. i'll see if they help

You can do this by setting up two actions for random videos one pointing to each folder. Then create a new action that is set to random. Add both sub actions for each random video folder to the action set to random. This will in effect randomly choose to update the source from either sub action attached to the different folders.

The current version of audacity is garbage and basically spyware. Use cakewalk. It's free. Copy my windows settings from this video and record at 48000 in cakewalk. Add similar filters.

You can use both websockets at the same time, just choose different ports. But I suspect they will all still work with websocket 4.9 if you want to test.

@@infinitequality thank you

Audacity is actually pretty terrible these days and I wouldn't recommend it. If you want to do some simple audio recording you can actually use OBS to capture and edit in something like Resolve or olive. I would recommend not using audacity these days. If you don't need to edit, then just record in OBS and convert the file to audio only using shutter encode. If you want a simple editor use olive, and use the old unsupported version instead of the beta.

Everything you need to get a great sound can be done inside OBS with plugins. If you want the highest quality audio possible, invest in a great microphone (sm7b) and a behringer soundboard with compression. Nothing beats good equipment for audio quality.

The trick for using lights and not blinding yourself is to use a lot of lights spread out instead of a couple of lights turned way up. Putting a couple of lights in 2 spots means the light is focused and that causes them to hurt your eyes. A lot of smaller lights spread out but turned down means the light is less intense from one spot making it easier on your eyes.

I created some files for you to try and, no bother at all.

Use this filter in OBS obsproject.com/forum/resources/3d-effect.1692/

I would place the fan so it blows air through the device, so a bit of trial and error would be good. If you can feel the heat reduce after a few minutes, I'd say that's good enough.

@@infinitequality i just read that having a fan blowing air in can accumulate dust down the road so my best bet is to have it placed on top so it sucks the heats up and blow it out, its just not my favorite but thats probably what i will be doing and i did notice huge difference either keeping the fan up or down makes the router very cool no heats whatsoever, i also added one to my Nvidia shield and one for my modem and i can’t be more happy 👍🏼 Edit: my modem is very small so when i was having the fan underneath it, it kept cool to touch but i still feel it warm from the sides so i decided to place the fan on the sides to suck air from the side vents and boom shakalaka the modem is like getting it out of a refrigerator 👌

To be fair, dust is going to accumulate no matter what if air is moving. It will just be a bit faster with the fan blowing in instead of out. I have to use a datavac every couple of months on my consoles, receiver, and soundboard no matter which way I put the fans.

@@infinitequality what datavac model you use, i might check this one out, i have all my setup right next to my patio door and it gets very dusty over all my devices everyday! So im sure i need one of these duster cleaner, i also have Coway AirMega 400s that helps reducing dust and pet danger and cleaning the air pretty it there to help my son allergies and asthma 👍🏼

th-cam.com/video/_yQNByXH9wY/w-d-xo.html

I have 12+ fans scattered around my room on various devices. Most of them are powered on 8+ hours a day, and 2 on my desk run 24 hours a day without stopping for years now. Only one fan I bought has gone bad, I'd say they are very worth getting. Extremely quiet too

Streamerbot has been updated a lot this last year and the UI is very different, but overall this still works. If you need more help you can join our discord and I can help you.

@@infinitequality apologies, that's a good point, I'm pretty new to streamerbot but I've seems it's ui change at least twice in that time 😅

I will probably need to make an updated video, tbf. But overall, importing the code, setting up OBS with the correct source, updating the Streamerbot actions to match OBS and the correct folder structure is enough to get this all working. All of that is the same. The big thing is you have to use websocket 4.9.1 compat for it to work still - github.com/obsproject/obs-websocket/releases

@@infinitequality ok i think i get it for the most part but when it comes to OBS Raw part im stumped. I set the source name and local file but when i test or go to save i get "missing requestType or requests

Does streamerbot show it's connected to OBS in the bottom right corner? Are you using web socket 4.9 compat linked in the description and pinned comment?

I just streamed today and everything was working fine. Is your streamerbot up to date?

i managed to get it working but i had to edit the code a bit. it should be up to date i just updated a couple weeks ago.@@infinitequality

Yes, this is very out of date. The StreamerBot version in this video is 1.7 and OBS is version 27. Both, StreamerBot and OBS have had many updates since. The biggest change would be the websocket change but also, anyone wanting to use this will need to use the same versions. This would work but anyone wanting to use the bot for streaming may find it may not that well since Twitch had changed a lot of their api

​@@Unleashed75​this still works just fine on the current version of streamerbot and OBS. You just need OBS websocket 4.9 compat. Everything else still works. The biggest change to streamerbot was the triggers section being added for actions which is only a ui change. If you import the code and setup everything else it works just fine.

did you hook it up via xlr?

Return it

If it's the one linked in the video, then the jacks will have a label that matched the output HDMI. One will be 'A' and one will be 'B'. You use the buttons on the matrix or the remote to set the input to whatever source for either and the jacks audio output will match the HDMI output. The inputs are numbered 1,2,3,4. So if output A is on input 2, the audio jack A will have audio from input 2. Given that you said you have a 4x4, I have no idea how it's setup for audio. Most don't have audio, so I would need to know the brand. Most that do have audio extraction, have a headphone jack on each output and you would have to plug into the output you want to grab audio from and set the input for that jack, much the same.

Glad it helped!

I'm having the same problem right now and about to lose my mind. Even at the streamer.bot documentation it says there should be an action selection bar on the edit window. I'm going to download earlier versions to try it again. Maybe it was removed in latest releases or something. I hope you can find a solution to it.

i went back and downlaod and downlaoded a older version, butthen it had had it but i still couldnt get the action to work when redeemed @@salyangoz91

Use the latest version of streamerbot always. The updates fix connectivity with the twitch API, not just bugs. The new way to add actions to triggers is through the actions main tab where you build actions, triggers and sub actions together now. Instead of adding the action to the channel redemption, you now add the channel redemption to the 'triggers' section.

Please read my other comment for help

@@infinitequality Thanks a lot!