วีดีโอ

thanks for the video. did you had to torque the mount to specs? Thanks

Did you change both sides?

Spider: ❌ Breakfast: ✅

bosch heat pump

Just do a setup for the accuracy then there is nothing wrong

That’s where I put my Apple CarPlay box at 🤫

Yes, from Makita, the best

Do a brake mainternace video as well. Please.

You wasted my time

From makita, the best

This is really a review of a second hand, well used saw. Try calibration and just add shims etc to get it back right. All your complaints are very minor imo, im buying this saw myself if you want me to check anything or need a photo from the manual etc let me know 👍 The one im ordering those supports (left and right) come away, i wouldn't expect them to stay perfectly level.

GET OUT ON THE COUCH

IDIOT

I'm wondering if my 2019 i3s has bad mounts. I hear a thump when in reverse and in some instances moving forward after coming to an almost stand still I had the car checked and it was given a clean bill of health so I'm not sure if it's just normal play or something else is wrong. There is no evidence of bad or leaking mounts on my car FYI.

Wow eso me da miedo

I have this one for three years now and works fibe. I just bought a mitre fence for 100 €. This is thing that woodworkers do with much more expensive table saws. Can't call it a scum because of bad mitre fence of 300€ table saw. You are too negative. As you talk about professional you must know that it is not problem in plastic, than track that goes in slot that dont have bearings. That's why is buying a mitre fence regular thing. The sane is with paralel fence. Pros buy 2000 € table fence, and anyhow buy extra new paralel and mitre fence. So don't be so negative

I don’t even have this car but this is a great video.

Thanks for opening it up. Those guys could have just used a solid hard rubber mount but they took the time to design an oil filled rubber mount.

I have the same saw but mine doesn't have the same issues except the hard start and noise.

Dog can not eat that

Well thats a vid that just wasted my time

I have the kgsV 216 m model(difference between mine and this is ONLY the motor, it has a variable function so i can change the speed depending of the wood i use and it has a lean start), can say it has issues all parts were checked before first use, blade /parts were aligned to perfection the side extensions i have modified by installing a adjustable knob at the bottom(that fixed the issue and is also aligned perfectly with the body of the saw,i can press hard on the extensions with no issues),for the clamp i glued a piece of leather so it doesn't leave any marks on the wood, changed the blade with a 64 tooth bosh,also it can be used for furniture production if you use cutting tape , zero splinters, .. there are a lot of small tweaks that make this saw stand out , i would give it a 4.7/5 stars, far as your saw goes (motor aside as it's not the same as mine )those huge scratches on the main plate , the busted up saw channel plate and the spiderweb cracks that are all round the screw hole of the led array tells a lot of the neglect it came across, mine doesn't wiggle like that at all , the sound you have moving the blade up and down is probably the main spring,it looks like you cut something besides wood, you are aware that your saw is beat up,worn out and slightly damaged? Nice video overall

Found

Your review is poor these are generally for site work purposes it's not for chipingdale furniture it's designed to keep the cost down and make it more affordable to a wider audience. You shouldn't be playing with this machine if you can't overcome this Very minor issue.

Trash

Stop sound stealing and making a video that has nothing to do with the sound

My dumb ass thinking he'll cut the cat open

Thanks😊

Is it really necessary to disconnect hv battery with this job?

Great stuff

www.353degreesnorth.com.au

beautiful

Welcome to Thailand 😂

osch

It's the 2 tires that are doing the magic.

New mounting bracket : www.hubauer-shop.de/en/carparts/i-models-parts-catalog/i3-meg/

Greetings ... Great video.. it happens to many people, and BMW has not done anything about it... Service stations take a lot of money from people for that work because the car's warranty has expired... I have questions.. Where did you buy the part?? (I know there is an improved version as well) What is the condition of the other engine mounts? I'm getting ready to modify the engine mounts on our car.. I bought glue that turns into strong flexible rubber.. I will glue the cracks that have started... and I will glue a bigger tire around to get the same effect as on that bracket you showed (more tires and less stretching) I see that they are filled with oil... I think that they could also be filled with this rubber-glue... to get strength... I don't believe that it will affect the vibrations much, especially the rear wheels. Maybe at least try...

Shit🫠

🫠shit

Driving like an empty 🎉

I always see this in Thailand 💀

Did it cause knocking, my i3 knocking regularly from front left. !

With which torque did you tighten the big screw? And do you have to support the engine in 2 places?

Thank you for this! Very helpful. Fyi for anyone else here, those pipes on the 2021 model have different bends to keep them well spaced apart, so that may have been one of the design changes in the LCI update (facelift) for 2018-2019.

Thank you,good Review ! :) If I extend the stop on the saw, will the saw be able to cut a height of 60 mm?

Lucky Cat😂

HAHA WHAT WAS THAT ; D

Order a Rexroth tool for 15000 € man. This video is not a user experience. This video is a special mind set and comes from a former employee of the service center 😅

Use ATP reseal on rubber... And that doesn't happens...

How?..