วีดีโอ

I can't watch this anymore. Poor tractor.😢😮😮😮

Dam another person who just slams a battery to it without pulling spark plug and lubing dry old cylinder or doing slow hand turning the crank. I'm 80 years old and been resurecting old machines since I was a kid and ALLWAYS drain.durty old oil and all that has settled into the sump. Hand massage the motor over to break the sticky ring on the compression rings to ease it to loosen up. Also pull the starter motor off and pull all the hardened grease off the bendix and loosen all up. Then test to see if it"l turn or need brushes. If you want to rescue it be gentle. Clean and lube everything go through fuel and points and mag. Only spin it over with no spark plug to loosen all up and wake the old seals. Test torque head bolts and all else. Then spin it to look for spark. Check and set timing. Then add oil gas and choke and open throttle to see if it wants to wake up. You can literally tear up a potentially good engine by just slamming a big battery on it shocking it out of it's sleep. If it's worth restoring it's worth doing it right. Every one of the stories I see starts by just throwing a battery at it. Wrong.A stuck ring or gummed up valve stem can interfere with rotation... Just do it right. Dandahermit.

Invest in a simple tripod. Thanks for sharing.

I bought a 1984 782 d diesel cub cadet it run good i love it

Nice work. Too bad they're all not that easy. At least for me lol.

I just picked up a '76 IH 1200, can't wait to do what you taught me, thanks !!! They will never make 'em like this again, these are the good ones.

Good thing you have two hands. 😂

The green in the carb is from the Ethanol in the pump gas thr previous owner used. Buy Ethanol Free gas for all your small engines. You won't need to buy any fuel stabilizer to add anymore. It won't be needed! I've been running Ethanol Free fuel in my tractors for the last 8 years and haven't rebuilt one carb since. It's worth every penny.

nice toy

Emery cloth

Please get a tripod. Bouncing camera does not make a good video.

Please get a test light and check Maybe not grounded good at points

Get a screw holder for ing work Well worth the money and cheap

Emery cloth is what it’s called Roll of different grit

Hoping it runs out really good and it’s a fixer upper 😊

Rust , jumper cables to ground the engine to battery??

Looks like seat is not very old so it must have ran in last 10 years From the looks of battery terminal I think it may have a serious electrical problem

Interesting vid, but please keep the camera still, left me feeling a bit seasick

Interesting video but, bad filmography. You know what the viewer wants to see and you make a good effort to effort to show them but, all the moving around and trying to do things one-handed, makes for a poor viewing experience. A combination of holding the camera in hand for the detailed views and tripod mounted camera shots for everything else should work better. You're pretty good at this. Get yourself a decent tripod.

Nice buy, now time for restoration

Sorry good subject but unfortunately the constant movement of the camera makes me feel sick sorry

Yeah I'll let you know where you find your parts they do not sell parts for my 1250

Just subscribe to you Did a good job on That carburetor Tractor sounds real good We'll be watching They Safe

Terry cloth.

That eye glass cleaner clothe is what's called terry clothe.

How much you get it for

If its back firing I bet its one of two things. Water in fuel or timing issue. Water more likely you should have air filter tube hooked up. It may be running lean if carb needs adjustment high side . We had an m model years ago dual fuel start n run on gas then switch to kerosene. Great little tractor but nothing like our B could do.

My 1947 M does the same thing. I tore it apart 12 years ago and it is still apart. I found the governor was rubbing on the front engine/timing plate

I have a 1950 MT with single wheel in front. Also two A’’s and a B

My 420S (same driveline as the M) is doing the same thing. Did you ever find out what is causing this?

Nice simple build. Cool that you used reclaimed materials. Love that old song too!

Sounds like you got it dialed right in. Sounds great :-)

Sounds like it just needs a simple adjustment.

i like your cat

my mt does this same thing, did you ever find out what was wrong?

replaced points and calibrated correctly, fixed the issues, tractor was flooding and backfiring out of the exhaust, or would die because fuel was not burning to full potential, new points that were adjusted correctly strengthened the spark tremendously... maybe check that again?

maybe still a little bit of water in the tank of if it sat like that for awhile maybe rust in the tank or rust clogging up the lines.

Most likely crossed plug wires causing the backfiring and running like crap issue.