วีดีโอ

1. There is a larger size. I bought both. 2. if your handheld torch goes hour while being held upside down or at an angle you’ve got a cheap torch. Buy a decent burzomatic torch and you won’t have that problem. 3. A Large rosebud torch attached to a 20# tank is a lot faster. 4. you can also fill smaller cracks with this stuff by holding it over the crack and dripping the rubber into it.

wow ! Thank you so much all my door knobs are falling off and I have tried putting them on again and go to grab knob and there it comes off again .I'am a widow husband passed away 4 yrs ago from cancer .I'm am going to try this wish me luck.God Bless

Thank you very much. Great teaching

I replaced the battery, but now it won’t charge. It had ~65% when I restarted the laptop, so the computer is accessing the batt. I restarted the SMC and PRAM, but it hasn’t helped. Any advice is appreciated. Thanks!

What did you do about the burning marks on the asphalt?

👍Thank you! This is one of the easiest to follow instruction videos I've watched. This will definitely save me lots of $$$. Before i change the battery on my old macair, I'll be looking for your instructions on how and where to save all my files so they don't get deleted.

Thank you for your video it worked perfectly 🎉

Awesome. How much to build me one of these? ^^

Thank You!

good job, but you will find that square pop-in metal box or square metal box with bracket. keep up

Helpful!

How did this last over the winter?

I think its way too expensive for the light kits :/

Very cool looking, I got the Fleet Trooper helmet from them, it is very cool looking as well. I am currently working on my 181st outfit next will be crosshair. I am with the Outer Rim Garrison in B.C. Canada myself.

Thanks

No check valve

Very helpful video you made, I just have a question: I don't want to pull the entire dishwasher if it is not necessary, so I pulled my float switch, cleaned up and checked with the multimeter. Initially showed 0,89 or around that number and I was very kind of happy that float switch was the issue, but after shaking it well and getting it cleaned with grease remover now it is reading around 13,5. I tested (acting as if it is in the dishwasher being exposed to the water temperature) by inserting into hot water numbers started dropping and putted into refrigerator to see if number comes back up so it did. Do you think or others who has some knowledge about it my rigorous cleaning did the job or initial reading (0.89) was incorrect and float switch is fine and need to check heating element? So making it short can dirt build up cause for it to malfunction? Thank you in advance to any response.

Mine came with a black and blue wire. Does the blue double as a black wire?

I hate gold🤢🤮 but i like the new one

great video. QUESTION: I am curious though, to know an update on this new battery installation and its lifespan specifically, does it hold its charge and has it lasted more than 2 months? all the reviews I'm doing, unfortunately points to this specific battery not lasting more than 5 months most saying 2 months. thanks for reading my comment

going to replace my battery very soon and i was wondering if anybody has any strong feelings on doing a backup beforehand? asking because i dont have the means for one so that's out of the equasion for me and i wanted some peace of mind

Thanks. This did the trick!

Has anyone encounter a sudden dead battery rather than slowly diminishing storage time??

nice job

Love your work and your videos are clear and concise. ❤💯 P.S. However l hate the pilot perhaps some may want to research a more accurate figure.

I replaced the battery for my macbook air the same model and everything but when I was done it just didn't turn on the charger didn't even turn orange or anything (it did before) can someone help me :(((

Thank you so much for taking the time to make this video, I’ve watched several today, and no one else showed how to test the old part- I really appreciate the time you took for this detailed video, curious if you can tell me where you found the information to know which pins to test and what the values should be? I am a maintenance supervisor for an apartment community and I always want to test parts instead of just replacing them when possible, definitely going to subscribe to your channel, have a great day 😎

THANK YOU! Mine wasn't heating and I watched a bunch of videos. I was confident I would know how to at least test the heating element, but, I wasn't 100% sure where to go next if that wasn't the issue. Turns out, my heating element was indeed fine and it was the flood switch. Even after cleaning it out, which improved the resistance, it still wasn't enough and I opted for a new part. I went with actual GE part and it was more expensive but worth it for that peace of mind. I just have completed my first cycle with my washer getting hot and cleaning things again. Your video helped lead me to the flood switch and identify that as the issue. THANK YOU!

So the one thing I have to ask, is essentially could you use zip ties to attach an Alice frame? Reason I asked this is because I use hasbro pack. But my partner usually uses one of my 80% spirit packs and there were a little grooves in there. I was able to zip tie to it to an Alice frame. So are there grooves where I would be able to do that with this, from the view of the back of the, I would say you technically could

Can you put the glass back in?

I've got one thing to say: 🤣

Should of played into the fire by Dokken

Great vid did have to go deep sea diving tho

Wouldn't ABS be a better choice instead of PETG?

Thank you 😊

124EIGHTB - tub 12TWO4- sink You're leaving some numbers off there, bud.

Thank you for your video. I replaced my pump by myself & saved myself some $. 😊

Thankyou good sir.. New battery in the mail. My knowledge has grown today, because of you. Keep up the DIY 😊

You are my hero 😂

The link took me to the different package colors which cost $49. But I found the same one for $39. I have no idea how different.

Great video, thanks!

I fixed my error 26 by taking a shopvac to the filter, which cleans any clog/dust between the slits of the filter. Good luck

Thank you so much

What size U nuts did you go with? I have the 1” L brackets but want to make sure I have the right sized ones that you had :) thanks!

The one thing I'd recommend doing above all else that you haven't done is replace the stock ribbon cable. Even weathered it just SCREAMS "I am a toy" The GB2 spectra strip cable can be had pretty cheaply. The GB1/Afterlife/Frozen Empire ribbon is a custom job and people do make them but they're pricer. But it's such a huge detail that makes all the difference, that is easy to swap out. Or add a 3d printed speaker hole cover.

So I just got mine. I was going to build a Q pack, but decided I liked the idea of the pack being lighter and “done” for Halloween. That being said, I plan to do quite a few mods including 3D printed parts upgrades, tubing upgrades, and lashing up a 3D printed wand to it with arduino based electronics in the pack to replace the basic stock stuff. Evenything I’m planning on doing will be reversible.

Thanks for taking time to do this. As fate would have it my problem was the float switch.

Nice helpful video which I used to replace my wife's battery (actually her 2013 Macbook Air's battery). A bunch of whiners in the comments below criticized you for spending too much time on style and not enough on substance. Sure, you could have done this in 5 minutes, but you took the time to make it enjoyable. Your photography and instructions are great. You also show great class in how you responded to the few really harsh comments with humor and lightness. And just scroll down the comments section to tally up how many thousands of dollars you saved your viewers. Well done!

A clean crack is essential….

Hello from George in Australia. Saying hello and see what's new. I've subscribed for your site finally. Anyway hope your well and building some exciting Star Wars studio model. I'm still hesitating to buy the 1/32 AMT Tie Fighter. I checked my local Hobby Shop they have one but it might be gone by now while I'm speaking to you. Well it's also to do financially not the best and also sidetracked buying something else. Still hoping. At least for the time being I have the Bandai kits I suppose. Wish you well.👍🇭🇲🦘🐨✌️