วีดีโอ

From the description: Used the Dicor 2 part system, cleaner/activator and then epdm rubber roofing coating system. Just under 2 quarts of cleaner/activator used and 2 gallons of coating. Roof is 24'x8'

It's a 24BH and 1 gallon was cutting it close if I recall. I ended up using 1.5 gallons and think I did 3 coats. The can says how many sqft it covers.

Thanks going to get a 2nd gallon to be safe

I appreciate the suggestion. It's a two part system with a cleaner that you wash off and it can stain the outside of the trailer, hence the tape and poly. It did basically blow off and I had to wash the outside anyways though. Better tape next time...

1 tape AFTER wash and dry with non-staining cleaner 2 cut in seams or reseal 3 masking on a windy day with wet tape is not effective 4 get an air conditioner 5 use a brush not a pressure washer

@@scotthuisman5035 I'm about to remodel my camper bathroom. Kind of intimidating when you've never worked on a camper before. Taking out the bathtub and installing a shower.

I tarp every off season/winter for approximately 5 months so it's covered for that time. I have no leaks, slight discoloration, but no black from the EPDM showing through.

I also used this product; two year later, holding up well.

Hey Marilyn! That is correct. Checked the owners manual and it instructs you spread the load across multiple rafters. Would have been alot easier otherwise. Cheers!