วีดีโอ

So what happens then when you have 0.0 volts coming out of the IDPM? Then 0.0v at the Alternator?

Helped with a similar problem on a different Ford (2013 Fusion) with same over charge symptoms.

same problem with 2012 VW Routan

Great info right here! Good to know what bad scenarios look like

I have this promblem now but no lights and radio works

Where is the receiver located

Extraordinarily detail ! Super helpful !! I learned lots !!! Thanks mate . 👊🏼 🔥 🧰

Thanks

had same problem my hyundai, im never buying another one, my girlfriends honda shes had same battery 3 years starts right up hyundai is shit cars.

Professor level technician!!!

What scantool you have? I have Autel MS906Pro and my GM software has been at version v15.00 since I got it a month ago!

Whats the fix for this ?

Is this method for Hyundai all over the world?

Hi, I have a 2008 Mercury Mariner hybrid ( 380k) sent to independent shop for recharge! Low charge after sitting 6 months! Recharged , but won’t get cold ! Feel like 70’s! What should be checked next?

What if you only get one click when turning the key. Car drove fine day before parked it till 6am then drive it home started fine first crank parked it again for 4 hrs then tried to start and only got 1 click bought a new battery and still same thing. Any help

Did this vehicle have and active CEL on for the fan faults?

Do you know where to get a Service/Shop Manual for the Air Suspension System for a 2015 Ram 1500 Sport?

This just happened to me tonight with my 2015 T&C.

Hyundai is the worst customer service on earth

That looks like the same problem I am having. My windows jump when I press down on the driver side, and the pasanger side. I wonder if this is a indication. How do you get the panel of the door now? What did you have to replace?

My 99 camaro v6 does this

going to tear my POS 2012 caravan apart and start pulling the easy modules first. thanks for pointing me in the right direction😅

2015 Chrysler town and country same issues, after owning it over a cold winter I noticed it didn’t happen during the cold winter months.. figured it must be a connection where the metal contracted and made better connection when cold, and on hot days during warmer months, it was almost a daily occurrence, in fact, I’d have cold mornings where it ran perfect and warm afternoons it acted up… long story “short” I found the problem was mostly the battery terminal connections were loose! Tried tightening them and found the tightening mechanism not working properly, I ended up removing the end and clamping it down tighter then putting it back on and hammering it snug down around the top post. It did the glitch two more times since then, but each time you could see the warning lights shut off one by one quickly in a matter of seconds as if the system was figuring out there were really no issues with each function. No issues since 🤞🏼 😊

My Hyundai Sonata is doing the same thing

Very very informative.Thenks

Thank you, I have the exact same issue on a 2011 Kia Optima. Unfortunately my Kia dealership can't do anything else than replace the whole transmission, so I'll do the diagnostics myself.

Correct me if I'm wrong, but if it's a short in one of the modules on the bus, shouldn't removing power to thoseoduces do the same thing?

Great video. I have a 2013 CX-9 with the same problem. it doesn’t have the advanced keyless, but this video has been very insightful into my problem. I’m a professional ASE master certified mechanic, and I replaced the key fob, thinking that that was the problem but the problem was staying the same. The key fob will not unlock the doors you can unlock the doors manually by pressing the door L/UL switch inside vehicle. It’s good to know that there is a remote keyless entry module that is separate from the BCM. I don’t have a scope on my BT 916, but I really think I should get one as seeing how crucial it was in finding the issue in this vehicle in your video. Do you work for Identix?

👍🏽

Ever had the error code failure to load the ROM after it downlaods it?

Best vedio i have seen on youtube I learn a lot I hope to see more Thank you

Hell ya great video

How do I know ECU using after market j-2534?

how do you run this network test if i cant get IDS to communicate with pcm?

Thanks for your video. I wanted to check the hi/low pressure on a 2019 Ford Escape titanium ecoboost but I can not find the low pressure port. The high port is next to the radiator but I haven't found the low port or a video that shows where it is either. Can you tell me where it should be?

Bit did you fix it and how?

Where is this conector located?

I got this exact same problem starting today ! Same year too 2011 caravan and even had the no buS show up faintly on display ! Front wipers remain on and dash lights up like a Xmas tree. Before I saw this video I disconnected battery for half hour and reconnected and did nothing. I had the passenger front door window replaced a few days prior so not sure if they did something to the door module when they took it apart but problem started 2 days after that. I will try disconnecting wires where these modules are one by one and update if these solve the problem ! Quick update : same day as problem occurred in the morning now in the evening when to start and move it and the problem is gone ! So I’ll have to wait for the problem to come back to find the problem just like the video had to !

WW

So can you remove the rear blindspot monitors and keep the draw from happening? They are pretty pricey to replace...

Very good demonstration, I'm going to go attempt to diagnose the problem right now.

I am having trouble with my dodge journey, it shot off as I was driving 2 different times and it wouldn’t start, i left it alone for like 10min, and then it started back up. and I get codes u0002-88, u0100 and u0101, the battery was recently replaced, I’m hoping it is just a loose wire somewhere by the battery my car doesn’t say no cam. I’m gonna have to do some troubleshooting. Thanks for your video it’s the only one that has given me a place to look 🤘🏼👀👍🏼

Have anything on fuse m10

The photo you showed of the bad wire is ridiculous. Was the bad wire outside of the truck or in the truck underneath the carpet?

i wish you showed the actual connections and doing the test

hello my name is Jesse, i was wondering if you can give some info on how to set-up the KIA j2534 passthrough

Dude you the absolute s..t lololol

Great video! Keep up the amazing work!

Hey what waa that noise right after u started the van. I xamt figure it out. My ruck makea the same noose

This video was a huge help! Thank you for posting up the diagrams, information and pictures. The only let down to this video was the audio volume drop. It went from loud and clear to almost silent. I had to move to another room to hear you go over the diagrams but i'm glad I did because you covered some really good stuff. Keep up the good work!