วีดีโอ

Thanks for the video and tips. We had three people to get it disassembled. The problem now will probably be getting it back together after we move. One problem we did have was getting some of the screws out (specifically the ones that hold the ladder). When we would turn the screw on the inside of the bed, the one on the outside would turn with it, so it was really difficult to take off the ladder. Luckily, we removed all but one, so the long piece is still attached to the bottom bunk, but intact.

Thank you!

TIPS : if you want to avoid this fail, SIMPLY flip the bed to its side and that way all the frame will be supported on the floor by their side. You will be able to disassemble them safely. ✌🏻

Don't buy one I had mine for six months and then it collapsed on me and I got hurt took a week to recover 😢

Good to know the trick, thanks 😊❤

Mamy thanks! Very helpfull.

Thanks for helping us save our bunkbed!!

Remember when Covid was a thing?

Bumps in the road make my Solas 250 turn off. It happened on my coaster bike and now on my recumbent trike.

Thank you

My idea was to take the manual and undo each step. But trying to get those plastic screws out was impossible. So, I took off the ladder and put it on its side. I slightly unscrewed the sides until each part was loosened and was able to take out the assembled bed bottom parts which are pretty heavy. No failures on my side.

The easiest way is to put the whole thing to its side after disconnecting the ladder first. After that you would just remove the bolts while everything touches the ground and voila!

Excellent video. Keep it up

I just installed mine and forgot to take into account my own height. Fortunately I'm pretty average, so I won't have to duck under it every time I go to the bathroom.

THANK YOU <3 Been thinking about this forever!!

I mistakenly disassembled my bunk bed in the wrong way, I'm having a hard time to disassemble the stairway, what should I do?

After 12 years with the IKEA bunk in one room, we wanted to move it to another room. So I just finished taking it apart and reassembling it. Your video helped me get started as well as to avoid that one mistake. Thanks!

Ergonomics: good but not as good as Logitech Lift Weight: surprisingly light, about 30g lighter than Logitech Lift Latency: kinda bad Got this as a 2nd ergonomic mouse for $16 at Anker Ebay store. It is ok for office work but the time it takes for button presses and direction changes to register is high compared to the Logitech Lift and wired gaming mice.

Thanxx🎉

Thank you for making this video. I'm taking this exact bed apart today. I appreciate it!

Is it possible to mount it without screwing the two ends and just tightening it?

Did anyone take this platic inserts out if yes please tell me how?

So helpful and thank you for the heads up!

THANK YOU! Using powerpoint to design merch, this really helps when sending to the suppliers.

Good job dude.. im from 2023

Thank you for your helpful videos. There are very few videos explaining how to disassemble a bunk bed.

Thank you so much for this video🙏🏻🙏🏻🙏🏻

I got mine ✊🏾

Thank you

You didn’t explain how to do the plastic inside 😢

What I was looking for is how to disassemble and- more important - reassemble the lid after taking it apart for cleaning.

you handle shit WAY too rough...Ill bet that charge port isnt working anymore

thank you so much for this wow! incredible life saver

Lay it on its side first

Video is very good. Not long ago, I tried to buy a vertical optical mouse of the renhotecic brand. After using it for a while, it felt ok to use. It is recommended that interested friends can try it out.

Great video bro I could not find how to charge it smh

Got mine on eBay 35 what you use for the front

I appreciate you big time for this!

Thank you very much. This is the best explanation and the best solution!

Can these become two beds I'm trying to convert for my kids today and separate

TH-cam Bsl PSP

what happen if I save the file in diferent computer, do I need to repeat the process all over again?

This worked a treat on Office 16! Thanks man! 👍😎

Cheers really helpful!

It's good if you get it to work Unlike me

Great stuff. Thanks for sharing. Really useful ⭐️⭐️⭐️⭐️⭐️

Great work! keep it up.. thanks

How to turn on group ride mode in this?

you just saved a project.. thanks

Thanks a ton. That's a great help to me.