วีดีโอ

This ground wire should have been taped over. Thank you for your fine advice.

@@pempcar ok but u dont have to connect it?

@@Element-mq3ez Yes, because the yellow video housing is the ground wire.

@@pempcar thank you!

Yes, Linux can also do CarPlay with Android auto functionality; it's just that it can't install any software like TH-cam or map APK. android screen has built in GPS navigation and you can plug in a 4G SIM card to get internet. If you just want CarPlay functionality, linux is more cost effective.

Dear, you need to disconnect the OEM car Bluetooth from your cell phone and only let it connect to YeeHung's Bluetooth. Please also set AUX to manual mode in factory settings. settings/factory settings/190627/vehicle/aux switch model/manul

Dear, Please contact our after sales team at Service@yeehung.cn

Have you connected the three wire terminals of red, white and black correctly? I hope you can refer to the following video to connect it. th-cam.com/video/FGvNNRAMPcU/w-d-xo.html

You need select the oem camera option in the settings. 3:42 of below video th-cam.com/video/jOK8bPDxtzo/w-d-xo.html

I'm sorry, I'm not quite sure I understand what you mean.

@@pempcarhi for the blue module did you not have to flip the toggle switches like the ones which are on the side of the blue module?

@@yashkashyap3151 Yes, you will need to choose these toggles based on the size of your car's model and display. You can refer to the item description on Amazon to set it up . www.amazon.com/dp/B0CGLLSK2F

Sorry, we have not.

Sorry, it can not fit right hand drive.

You can restore the factory settings by clicking Recovery in the System info menu. If touch is not available, you can try using a mouse plugged into the USB port and you will surely be able to select it successfully.

Yes, this bracket only fits W204 2013. OEM display does not show, please check if you have connected the LVDS box?

Yes, this part is for C-Class W204. Please note that if your car is NTG 4.0, please use the LVDS box with NTG 4.0, otherwise it cannot display OEM display info.

Not sure, it may be a ground isolation problem.

Your suggestion is a good one, for the time being we are not selling it.

Please let me know if you are experiencing any problems with Android 13?

The following video should help you in transferring the auxiliary cable. th-cam.com/video/FGvNNRAMPcU/w-d-xo.html

Dear. if your have the oem gps antenna, You can purchase a PEMP antenna adapter. www.amazon.com/dp/B0CN12J6VR?ref=myi_title_dp

@@pempcar yes, thats will do nicely. thats the one thing about aftermarket stuff, they tend to make the car look non factory and sloppy with things hanging out of everywhere. we can lose that g4 box too or place it in a less conspicuous area. thank you

Yes, that F32 NBT EVO you have we'll also be producing the corresponding 360 panoramic camera.

@@pempcarThe F32 2018 and up models have a thicker front grill than the older models, so the front camera clip won’t fit on the grill at the front, so you’ll have to modify the clip for people who have a 2018 and up F32 model. And I think for easier installation, they have a side mirror cover for the cameras that clips into the side mirrors. And send me a link for the new Ultra-Thin 12.3" Android Screen on your BMW F32 NBT EVO.

@@m0untainli0n1 Your opinion is important and I need more time to finish it。

I'm in the process of putting together a link to the product and will send it to you when it's ready for sale.

Thanks

Its main function is to activate the AUX menu of the OEM interface, if your car has an AUX menu, you don't need to buy it. Sorry, it doesn't have Bluetooth. It only has a 3.5mm connector.

If NO signal is displayed in the OEM interface, you can select another correct resolution in the Car display in the factory settings. If you still can't solve the problem, please contact our after-sales service team at service@pempcar.com

Yes, you need to connect the front camera to FF-CAM, you can refer to the following description to do so. But note: PEMP Android screen it only supports front view camera in AHD format. www.amazon.com/dp/B08YWSL269?ref=myi_title_dp&th=1

@@pempcar thank you. That means i need a front cam with ahd. I will look if i find a good solution for the e60.

@@Heartbeatpb Yes, pemp sell the e60 ahd on PEMP Store. www.pempcar.com/products/bmw-e60-front-camera

Sorry, I haven't tried to do that either. If the fiber optic cable works, maybe it could work.

Because Android sound must be input from the OEM Radio AUX IN.

Not necessary, as the motherboard inside the Android screen already has the CANBUS protocol built in.

@@pempcar Thank you!

Yes, if your E83 doesn't have an AUX menu, you'll have to use an FM transmitter to get around the sound. th-cam.com/video/kV-NaZ7-dRE/w-d-xo.html

Yes, it will be better after using the blue anti-glare touch screen.

BMW X3M 2020 ID6 is a EVO Sytem, another model with it fits. You can email me at sales@pempcar.com with the OEM display and we can discuss which item will fit your car.

Пожалуйста, сообщите мне, есть ли в вашем стоковом интерфейсе меню AUX. Если нет, то у вас нет возможности получить звук с Android. Вы можете приобрести FM-трансмиттер, чтобы решить эту проблему. Если я не правильно понял, пожалуйста, пришлите номер заказа на покупку в сервисную службу по послепродажному обслуживанию на service@pempcar.com.

¿No hay un menú de entrada auxiliar frontal en el menú original del automóvil?

@@pempcar No sólo da la opción de Aux Rear no deja poner otro

@@pempcar me he dado cuenta en el maletero hay un amplificador Alpine original no sé si eso influye en el sonido está todo conectado la fibra óptica fusible todo parece estar bien.

@@apr9832 No afectará, ahora se trata de arreglar la entrada de sonido Android desde el AUX de tu coche. Si se determina que no tiene un puerto de entrada AUX, el trabajo, tal vez Usted sólo tendrá que utilizar el método de transmisor FM. th-cam.com/video/kV-NaZ7-dRE/w-d-xo.html

Si può acquistare da amazon o da pemp store. www.pempcar.com/products/bmw-e60-ccc-vertical-android-screen www.amazon.it/dp/B09PTGYN3G?ref=myi_title_dp

You need to open the OEM Bluetooth device connection interface the first time you use it, after they are connected successfully. Every time you turn it on in the future, it will connect automatically. Yes, the original radio works fine.

@@pempcarevery time I turn the car on how long will it take to connect ?

@@ProspectElite It should connect to the phone within 2 minutes of turning on the car. However, the following conditions must be met: Your cell phone's Bluetooth and WIFI must be turned on.

If you turn down the sound on the android, does it work?

@@pempcar no, it is still crackly. Normal Mercedes Audio is fine.

@@user-qt1tr5ej2m Android sound is input from OEM AUX in, the sound quality must not be as good as OEM host. You can record the sound to send it to the aftermarket team at service@yeehung.cn

@@pempcar Would appreciate a lot if you could say that the audio from carplay is the same quality as from bluetooth OEM commander. Thank you

@@maximussmirnoff CarPlay sound is going to the OEM radio through the AUX IN channel, so it's worse than oem Bluetooth.

You may need to connect the Android audio output to the AUX IN connector in the armrest box. You can refer to the following video to solve it. th-cam.com/video/jOK8bPDxtzo/w-d-xo.html

Thank you soo much I will definitely check that out !

I bought the Car with that screen already installed . Last week I’ve been trying to figure it out what’s wrong with it .

@@maggieglamournails9307 If it comes from PEMP, you can email our after-sales service team at service@pempcar.com for technical support for you. But if it's due to a hardware issue, they may not be able to help you.

You must first use the activator to activate the AUX MENU of the OEM menu according to the steps, after the successful opening you can use the AUX, confirm that no code is needed.

¿Pudiste encontrar la entrada trasera AUX? Si es así, alimenta el audio del androide a través de ahí.

@@pempcar Detrás sólo tengo L & R tomas de auriculares no veo que tenga Aux.

Arreglado entrada aux In y Out juntos ya funciona perfectamente 🎉🎉 no hace falta poner el auxiliar en el reposabrazos

@@apr9832

If you just want to get a boot logo, you can send the logo to the PEMP after-sales service team at Service@pempcar.com and they can help you achieve it. Because the work of updating Android 11 to Android 12 is more complicated.

Yes, w204 has the aux in menu, you need connect the aux cable to the car's AUX IN sockets. or use the AMI cable.

Yes, it built-in Apple CarPlay.

Yes, it fit your bmw f20 2012

No, not same.