วีดีโอ

I got that exact one for $241 on Amazon yesterday.

Thank you! Worked perfect!

Those switch and breaker terminals are bad about getting loose. Sometimes when they get a little loose the pump will run fine for a few minutes then cut off like it's hot. Turning it off and letting cool will reset this. With a loose terminal, it can build up heat and cause a false trip on the breaker. They have a lot crammed in that little spot for switch, breaker, and wiring.

It is totally unnecessary to remove the bumper cover.the radiator drops right out between the cover and fan.

I’m currently doing this on a 2010 cobalt, did you top off transmission fluid after radiator replacement? How much needs to be added?

How much fuel u using in your truck , i bet that not cheep

Literally the exact setup blows my neighbour's minds every time

Haha nice i do the same thing with a 3000 watt , i run my air conditioner fridges security systems and lights😊

I had this exact thing happen; the flywheel was stuck, and after going through the first two steps you showed, I watched this video and looked inside that exit part, finding the same thing. it's cleaned out now, and works perfectly. Thank you for a clear and coherent solution.

You don't have to remove the bumper cover.there is a video that shows the radiator from underneath the car it is so much simpler.the video is from TRQ.

Excellent video, dropped my balt on two jack stands lowering it several years ago and the radiator works fine but has a massive dent in the bottom of it about 8 inches up in the center so might as well replace it while I am doing the heater core and thermostat this week. The video helped a lot just with the idea to take the bumper off to get to it easier without a lift.

I love it! Great job! Thanks for helping people that need this video!!!

How is it holding up? I'm surprised they could level it right on the soil without any gravel below each concrete block.

Very easy to drop it out of the bottom. Take off lower and upper mounts,

To replace the spark plug for 3 in. 338 cc Gas-Powered Wood Chipper Shredder one needs to be Houdini, impossible.

Keep up the great content. Thank you for posting some good information honest opinions and real emotions <3

Great show man. Love the content

They are fast, i buy 2500 items plus per year and flip them on ebay. Outstanding company, the CEO Spencer does an excellent job!

Anybody know of an auction like this in California ?

🥓🥓🥓🤣🤣🤣💩💩💩

This is awesome and hilarious brother! Love from the PNW.

Good video, I never would have imagined that that you have to take out the front clip to access these parts. I saw another video where they took the radiator out/in from the bottom. Comparing the two, your method looks better as it appears easier access to connections, hoses, no lifts, etc. There was a comment that your video did not have enough detail, but it look sufficient detail to me. What is in those transmission cooling lines, antifreeze or ATF? if ATF, do you have to add ATF to transmission?

If your gonna skip threw most the work then why make a video

Thanks for the video. Just bought a tank and had this pump on it. Exactly what I was looking for! Appreciate it brother!

Been buying from them for years in Las Vegas. Best kept secret in town. ❤❤❤

Thank you! That was exactly the problem! We didn't have a long grip bar like that, so we had to take off the huge main top feeder chute. Where did you get that bar that you used? And what size is it? Or at least what type of thing is it?

Katy Nellis ROCKS ❤❤❤❤

Nice. I really like the holes in the unistrut for the ratchets. Great idea

nice! how many hours have you ran it since buying it? thanks!

I have a 2008 Cobalt and the fan may need replacement. Watched another TH-cam video and they removed 6 bolts under the car that fasten the 2 support brackets for the fan radiator condenser assembly and removed the fan out the bottom while the front wheels were up on car ramps. Looks like it may be easier to get the radiator out that way too. Maybe. Looks like your way works.

I, too, have trouble hearing the audio on this video, but the information was useful. Thank you.

Mine just keeps losing prime. I have to loosen the plug on the top with the 1/2” square head on it and flip it on and on and off to re-prime it every time I use it.. I’ve been lazy and haven’t tried resealing that bolt yet to eliminate that potential problem, but I just thought I’d ask if you’ve ran across that issue on one of yours yet

Promo`SM

I would have been saved a lot of money and heartaches if I had this information when I was a younger man. Paperwork on used cars can tell you a TON about what to expect. The worst car I ever bought was a 2004 Subaru Forester XT. I wanted it so badly that I ignored several red flags in the carfax report. It seemed like a great car - fast as hell, clean, feature-rich, affordable, low miles. But it was a northern car with tons of hidden rust, and at 130k miles, it had 8 owners. I should have ran. It ended up falling apart on me within the month.

This was a journey.

Professional homesteaders use RED, go team Knipex!

Please send Ray the information for TX23 in a text. Our family genuinely appreciates the effort you all put forth to provide this kind of an event, and it would matter a whole lot to Ray, my children, and I to consider attending again.

I love the shirt!!! Great work on the cars!

I own that tool I think I bought it a couple years back maybe three,and I bought it through Advanced Auto Parts website. I paid a little over $200 bucks with free shipping now it's $389 crazy. It is a good scanner, although I just bought an Xtool D7. The Innova was more clumsy for me and I had a little trouble with bi directional control on my 2014 Buick Enclave other than that it is a good tool. Another thing it was not enough tool for doing some diag on my 2019 F150 I found my new truck to be pretty complicated and and my 5610 didn't have a couple features that I wanted plus the update is expensive so for a bit more I bought another tool with three years of free updates.

**disclaimer** I said whipped cream but I meant whipped cream cheese

I know you'll have no problem keeping up that HUSTLE!

Diagnosis🥓🥓🥓

Done this on several northern cars. It's a treat 😅

『p』『r』『o』『m』『o』『s』『m』

I have one of these and though I have gotten limbs greater than 3” jammed in the feed pipe I am confused how she got the impeller so packed with wood chips. Was she running it less than full speed at any point and the discharge was not cleared? Maybe it got stalled before it could clear the impeller?

Looking at the video of your presentation it looks like your clip on mic fell off and was dangling too far away from your mouth it should’ve been higher up on your shirt. You can also re-edit the video by taking the soundtrack and just increasing that and then adding that back in. Very easy to do if you don’t know what I’m talking about someone with a little video production can do it very easily

I couldn’t tell if the video was good or not… I can’t hear a word you’re saying invest in better audio

If you run the chipper at a low speed or try to start it while there is a branch in the chute this happens. Been there myself.

Yeehaw!

And if those steps don't free the pull rope, Champion wants me to become a small engine mechanic with NO PRINTED INSTRUCTIONS! GRRRRR