วีดีโอ

Glad it was helpful! Thanks for watching!

Hope it works as good for you as it did for me. All of my cable ties are still holding tight.

it's 3/8" wide X 2" long. Not sure what gauge the coil is. I bought the strongest one they had.

Great! Hope it works out good for you.

You know, I used some off brand swivels from Walmart and they don't spin very well. You get what you pay for. Should have stuck with Eagle Claw. Also, I now use two swivels instead of one, and if the swivel you are using is too small, it won't turn as well.

And thank you for watching!

Yes. The manuals are always sketchy these days. When I do one of these tool profiles, I consider it my mission to adequately explain how to use it. Thanks for your comment.

Glad it helped and thanks for watching?

The Simpson should be a good one. I'd be interested to know if your maintenance fixes work.

Glad you enjoyed it. Appreciate you watching!

If the outside measures 1/2" OD, the ID will probably be between 3/8' and 1/4" depending on the wall thickness of the hose. Usually when you buy a hose rated at 1/2", that will be the actual ID. New hoses are more flexible and a 1/2" OD hose will probably stretch enough to accept a 3/8" barb. Mine were old and brittle, and the 1/4" plex tube worked much better. Thanks for your comment.

@@deerparkhomeshop2471 thank you for the information.

@@PhilipLMcAlary No problem!

Thank you, and thanks for watching?

It's called "Tite Chairs by Wonderlock'em". There's a link in the video description.

Thank you sir

@@essopsayed8549 No problem!

Since mine was pretty old, I didn't even think to contact Sentry. I may have gotten a free one too!

Glad it helped! Thanks for watching my video.

Hope it helps. Thanks for watching!

I haven't seen the cotton ball technique. I guess they saturated the balls with a sugar/boraxo solution?

@@deerparkhomeshop2471 yes! I put several in a jar with the lid and I switched them out. I sent my sister your video! thanks again!

@@annw-fitz4412 Thank you and appreciate the headsu p about the cotton balls. I may try that next time.

I have to apologize. I responded over a week ago, but I must not have clicked the send button. To answer your question, I don't see a problem with the torpedo baffles, as long as the bottom rim is 60" from the ground. That's how high a squirrel can jump and they are very good at figuring things out. A running start and a jump is all it takes for baffles positioned to close to the ground. I'm not sure how effective they are if you position them over the top of your feeder though, like when the feeder hangs from a tree or overhead support. Good thinking on the epoxy!

I did about 60 feet of fence, and it took a little over two weeks, but remember, I was filming a video at as I painted, so set up, takes, retakes, and etc. caused it to take a lot longer than it normally would. Thanks for watching!

Glad it was helpful. I have a couple more I need to pull out, but I'm going to do it in the fall.

Don't blame you!

So I guess you are having problems with yours? How long have you had it?

So far so good. There is no visible rust and no "sign of rust growing under the paint, but I wouldn't anticipate that for, hopefully, another 10 years.

@@deerparkhomeshop2471 how many years do you roughly think it will last

@@simpatico.official I'm hoping for 15+ years.

Good luck and thanks for watching! My apologies though, I somehow missed your comment.

Glad you liked it and ! appreciate you watching!

Accent? I don't have an accent!😇😇😇 (Actually, Deer Park, Texas) Thanks for watching.

Thank you! BK's Friend is one of our favorite cleaners. Very versatile.

Sounds like a good deal.

I'm glad you enjoyed it, and thanks for watching!

I used an 6" fine tooth metal blade to cut through the nails. If you're cutting through bthe timber itself, an 8" standard wood blade works fine.

It does have some really effective attachments. I thought it was a pretty good value for $400.00.

Glad it worked for you! The nice thing about using the cable ties is that it is reversible.

I've never done that or seen it done, but that doesn't mean it can't be done. I think rubber hose might burn before it melts, but it might work with plastic hose. If you try it, let me know how it turns out.

Glad you enjoyed it and thanks for watching!

I'll take that as a wonderful compliment! My Dad got me started on the path to being a handyman. Thanks for taking the time to watch my video.

Yes, I think there are a lot of folks in the same boat!

Well, I would like to say I'm really creative and talented with voice overs, but the truth is that I had to learn to do it because I can't remember my lines. It's much easier to do the voice overs. Many other youtubers are naturals when it comes to their dialog. I'm not. Sometimes I do 30 min. of film to get 3 min. of good content. Thank you for your comments and for watching my video.

No. When my velcro let loose, I noticed that the stuff under it was starting to dry rot so I replaced the whole thing for about $16.00. They do make self stick velcro sheet replacements which are much cheaper, but I haven't tried them. Both are available on amazon. Try searching "black and decker mouse sander pads".

First, let me say that I am much better at removing shrubs, than planting them, but most things I plant survive. I try to reuse as much soil that came out of the hole and mix that about 3 to 1 with compost. I also like to use the appropriate amount of root stimulator. Best time to plant is in the spring. Actually, boxwoods are very sturdy, low fuss plants here in Houston (Zone 9 -10). A lot may depend on where you live, so you may want to search for instructions specific to your area or zip code. Here is a boxwood planting link: www.thespruce.com/how-to-plant-boxwoods-4777363

⁠ First, I like to say thanks for responding. Yes, I myself have really never really planted anything either, but I have removed a shrub before and the soil seemingly turned into clay and I just didn’t want that to happen to the front of my home with these shrubs. I’m in Alabama, and with the beginning of summer if feels as though we’re in zone 9 but I think I’m in 8. But, thanks for the advice I’ll definitely use it.

@@bjohnsonutube Your soil is quite different than ours. We have coastal black gumbo.

@@deerparkhomeshop2471 Gotcha, I’ll see if I can find out more info..thanks again

@@bjohnsonutube Good luck!

You're welcome. Thank you for watching and commenting.

You're welcome and thank you for watching!

It sounds like you have a good routine. This is my second total gym. I joined a gym years ago, and foolishly sold my old one. Now I am back to it.

How is this model flimsy wide is it pretty stout, I can buy one of these for 150 or a fit for 300, thanks

@@dannywalker6279 It's sturdy for the price. The more expensive models are, of course, beefier. I'm over 200 lbs. and It doesn't sag or otherwise seem stressed by my weight. All of the frame and hardware are made of steel. I tested all the parts with a magnet to make sure of this. While the pulley housing is made of steel, the pulley itself is made of plastic, as are the adjustment knob, the caps on the leg ends, and the rollers on the seat. Also the squat attachment is plastic with steel legs. Hope this helps.

That's great. I hope you enjoy using it as much as I do.

You're right, it is very difficult!

You're right of course. Several other viewers called me out on this as well.

I'm glad it helped! Thank you for watching my video.

Great! Appreciate you watching my video!

You made me laugh. Great "chirping" pun. Glad you liked it.

I've never tried it. If you do it, I would start with a rug that's not to important to you, because with the pressures involved it could really damage it. Pressure washing is really designed for hard surfaces. If you do it, let me know what happens!