วีดีโอ

It’s a .22

I think it’s 120mm

Hi. The power was on about 60%. It was harder ground but I should’ve turned the power up a bit more as well

Hi, that’s what I use it for. We don’t use it as much as thought we would but when we need it the thumb cuts the job time by 50% or more. Still pleased with it 6 years later. Only negative could be When the thumb is fitted the excavator feels a bit “top heavy” but has always handled it ok. The grip talon is a solid attachment. Yes the grapple looks like it take too long to set up on the excavator. Thank you, Lee

David David yeah it would work with that one. Seems to work with all the rotating levels that I’ve tried

Hi, I would say set a day aside for it to make sure but about 6 hours should do it with back filling as well. We just hired a U17 and it’s a nice machine, very well thought out.

@@lovemud100 Hi there! Yes, i do like my U17!! I have not done much with it yet to be honest, but it seems all good to me!! I worked out that the hole was about 288 cubic feet, so say 288 bucket fulls to be on the safe side.. I allowed 16 seconds a scoop, and then doubled it as most things i do take me twice as long as i thought!! This works out at 2.6 hours, so your 6 hours seems pretty exact!! I will allow a day though as you say.. What size bucket is that you have on the takeuchi?? Is it 600mm?? I need to do a 600 wide trench for something, but i was a bit worried that a 600mm bucket might be a bit big for my little digger, bit like trying to dig a hole with a grading bucket.. What you think??

caerleon87 that’s a 600mm bucket I’m digging with there. Got it from digbits. It’s been fine on it and I had it on there with the grader and smaller buckets with no problems at all for 5 years or more. If it’s really hard clay I put the smaller bucket on. The 600mm is our most used as the foundations for buildings require that size. (We’re bricklayers)

@@lovemud100 Yes, that is what i am doing is footings, and like you say they are 600 wide.. Thanks for all the advice!!

Shouldn't take but a few hours idk I've got a Caterpillar 305 I can dig a hole like that in 15 mins

caerleon87 hi. It’s been great. It has good battery life and I haven’t jolted it off the digger at all. Works for grading, footings and drainage runs on a angle. (If the laser level can be set for them). Can even use it as a normal receiver for the laser level.

Thanks for that!! I have not got much experience with excavators, but i have my own 2 year old Kubota U17. I got it just for my own use here at home, but now a mate of mine wants me to do the footings for his new house. It is on uneven ground [he has a farm] so i thought one of these would be just the thing to get the bottom of the trenches level and flat, the surface of the ground does not matter too much. I thought it would beat the hell out of having them stand there all day with a rod mounted receiver in the usual way.. Love the way you can keep the bucket flat all the time.. Think you might have driven the things once or twice!!

caerleon87 thanks I enjoy driving them. Like getting paid for playing Tonka toys. That’s a very nice machine the kubota. Yes it’s much more productive than having to dip a staff all the time and much safer if it’s deep. It has a few fine and course digging modes on there for different jobs.

I went out today, well yesterday, and bought one of the CR600 things!! It came today in the post!! It seems very nice though, well pleased i bought it!! On monday now i am going to get a laser to go with it, a leica 640, as i want the feature where you can set out 90 degrees with it. Lot of money though!! Still, it is all free, as the bloke i am doing the footings for is paying to get me them as a prezzy, for doing the footings!! Magnet is well strong as you say, be a job to get it off deliberately, never mind it fall off or move!! See what you mean about the LED's being fine in sunlight, bright is not the word for it. It came with a very nice clamp so you can fit it to a rod as well. Got to be very well worth the £328 it cost!!

caerleon87 that’s a good price for the CR600. Hope you got the laser level (the feature for setting out 90’s is worth it) and dug the footings out ok.

Nhan Le. Hi, I’m not sure what you mean but it was about 450 dollars from Hard racing. Thank you

lovemud100 oh sorry . I want buy exhaust yoshimura rs2 carbon mini for grom 2hand . But i can't see . . Web , forum , v.v . U can help me .

xaviieR6. Hi, it's got a lot more deeper pitch with more bass, plus it is a little bit louder without the db killer.

Thomas Gardner hi, I got the bipod from a local shop, it's a Harris bipod. You should find them easy online. For the magazine holder, there is a link in the description to a video and in that videos description is a link to his eBay shop where he sells them. Thank you.

thefirebluesky 1 hi, it is quite loud but I wear ear plugs to block the wind noise anyway so it's okay at 60+ with the ear plugs in

lovemud100, is it loud even with the DB killer in?

n00bje yes, I would say it's louder than I thought it would be even with the DB killer in. But saying that it makes a nice bass noise and I got used to it after a couple of rides and I'm glad I got it.

lovemud100 alright, thanks!

Phillip Hamilton Lee with my wildcat if the cocking lever isn't all the way back, even by a millimetre the magazine won't go in. Once it's in you need to rotate the magazine until it clicks into position. Other wise the pellets won't be lined up with the barrel.

Thanks mate. You would get 1 maybe 2 mph more I would say but it gives a little bit faster acceleration. The air box mod is exactly the same as the older model Grom. Here is a link to a good video th-cam.com/video/6iPJ7iQlGIo/w-d-xo.html

I'm not sure. The exhaust mounts on the stock bolt mount. So it might not work without some modifications to the rear sets.

I got it from hard racing. Here is a link to the page; store.hardracing.com/cart.php?target=product&product_id=32101&category_id=

Awesome. Thanks.

How much was import and duty tax when you ordered it to the uk

Hi, my bike just has the air box mod, plus a k&n standard air box filter. It runs great and feels easier to rev since the exhaust was fitted, if that makes sense. It seems to have increased the top speed from 63mph to 66mph. There are no fuel mapping and no dyno.

Thanks. I appreciate that. I'll order the exhaust, bolt it up and just reset the ECU. I've heard your clip, but hard to tell from video. On a 2015 model, I rode one running a DG under seat exhaust and it was nice and low and mean. Would you say the Yoshi has a low sound? Also, is it rideable on city streets without the DB killer? I know it's sold as track exhaust only and not intended for street.... Just wondering if that's what they ALL say?

+Jeff Holthus the sound on the camera isn't the best and you can't tell much from it. Yes it's a deep base sort of sound but nice with it. When I'm riding and the engine hits about 6000 revs people start to look around to see what it is (with the DB killer in) I haven't had the courage to try it with out the DB killer out on a ride yet. It's well made and does set the bike off. Now and then it has a nice pop or burble as you go down through the gears.

Yes it does come with the DB killer in its own sealed bag along with the bolt to secure it in place.

Hi the db killer takes about 30 secs to a minute to take on or off. It's one screw on the inner side of the muffler.

Hi. I fitted a sling stud. It was straight forward. Drill a smaller hole because the stock is only made of some sort of plastic, then the sling stud gets screwed in the hole. Then the bipod clips onto the sling stud.

Hi mate. I find the best are air arms field Diablo but the tightest groups are JSB jumbo Diablo RS and they're lighter so have a flatter loop.

+lovemud100 Cheers for that mate your a star. I liked RWS Superfield in my R10 MKII. Have you tried them in the Wildcat as might be getting a wildcat tomorrow or weekend.

+waddac2 yes I have tried those. The wildcat doesn't seem to be fussy on which brand pellet it uses, I tried a few test packs and those style of pellets group well. The two pellets I said about seemed to be that bit tighter groups though. Hope you get your wildcat.

+lovemud100 I got my wildcat today before I came to work amte and well impressed with looks and weight. I took scope off my r10 and quickly put it on and had a look through. The mounts I had on r10 were lowest type mounts and don't think they suit the wildcat due to when I put but upto my cheek it seems I have to sort of scrunch my neck a bit or move wildcat more or less to my cheek bone and not comfortable at all, so may need medium height mounts for better viewing through scope.

+waddac2 sorry for the late reply. glad u got the wildcat mate great riffle. I use high mounts on there. It feels that I could do with an extra couple of millimetres though. I think it's a thing with all bullpups that they need higher mounts.

+Darren, DMD Saddlery thank you. i was surprised at the length of the shroud when i first got it as well. thought it was going to be shorter. i was told that shroud length is calibre specific, getting longer with bigger calibers. i think i had one from the first batch that the UK had. got it in July 2015.

+lovemud100 oh ok then I see, yes I was under the impression they were caliber specific too, does indeed look like you got the .25 shroud to me. No bad thing though in my opinion 👍

+Darren, DMD Saddlery it's nice and quiet which ever one on there. Nice leather work and carving on your up loads by the way.

lovemud100 Yeah it did sound pretty quiet. Thanks mate.

It's a great rifle and my most used one now. You should keep the Evanix though, that seems a great rifle as well.

Hi, just purchased one and I am having an issue with the loading of the mag as it does not just pop in is this normal? It needs to go in just so or it will not load..

Hi, I'm not sure. The first photos of the Wildcat the shroud was shorter but the shroud on the finished product is longer, all I can think is the shroud was too loud in the short version.

+lovemud100 hi i think is about the calibers... i had the 3 calibers side by side and each shroud is bigger than the other

Hi I got the bipod at my local gun shop. It's a Harris 9-13 swivel, the swivel takes any cant on the riffle not the left to right movement. Here is a link to the exact same bipod www.uttings.co.uk/p103127-harris-model-s-lm-bipod-9-13-inches-notched-legs-swivel-base-hb1125-s-lm/?mobile_version_preference=desktop#.VjVPGV_fX7o

+lovemud100 Thanks

The link to the magazine holder is; m.ebay.com/itm/FX-Wildcat-Airgun-Magazine-Holder-Holds-3-Magazines-in-Stock-/121746368645

ebay pal