วีดีโอ

Dude can’t read

I had the same issue. After jump start it works fine. Now after two week or three weeks the same thing in the video happened. I jump started again and it works fine. At the last service i was recommended to replace the starter.

I hesitate trying this, simply because of old school but tough products like Collinite 476s, 915 and 845. Offering great durability and Carnauba warmth and depth, and offers crazy water beading as well

Many ppl buy these intakes for sound that is what you will def get. Big gains however you won't unless you are pulling in more fuel and have a really good flowing exhaust. Like having the exhaust manifolds ported n polished. That's the log style manifolds as well they flow like crap. At least the second gens you can run actually headers on the V6.

This vedio is very helpful wasnt sure about the front

Thank you! I have a 2007 Acura TL base model and this was the exact points I have been trying to find, the side ones I got and the rear but I couldn't recognize the front one, thanks so much! 3 years old and this video just helped me in 2024. God bless you my friend.

Cool Video! do you have the parts numbers for the parts you are talking about , specially upgrading Brakes.Thx

Never hit 60

Do you run these in the winter and how are they holding up? I just got the same ones for a Rav4 Prime.

Thank you

Parts numbers for PP/Ts (Brembos) GR86/BRZ: PP Compatible Rim: 28151FE030 PP Compatible tire bracket: 97046CA000 PP Compatible cover: 95086CA070 Washer: 97047FG000 Spare Tire Bolt: 901720002 Make sure to inflate your tires to 60 PSI.

Hi video cut quite quick, how many times did you do the top up cycle? Is it necessary to push down on clutch pedal or fork?

Life saverr 🎉

Seen 5w 30 engine oil and not the 0w 20 you’re using. How’s that working out for you?

How much fluid do you need to change the clutch fluid?

that why I love honda and toyota, I have one Honda CR-V EX-L 2007 it never do that to me, the engine always start with only one key

What are the sizes of the crush washers needed for drain and fill plugs😊

Complete waste of money. If you're going to go mid-torque, get a compact tool with a 3/8s anvil, and keep a full size half-inch for when you need it.

Bad battery, I’ve owned my Acura for about 6 years now. Take out the battery and let it sit for an hour or two and get a volt meter and check it or just take it to the store. If you leave it in your car and get it checked it will pass every time.

Moral of the story for me is I am going for the Milwaukee M18 fuel (1/2"). Sad cuz my ecosystem is DeWalt. So now I gotta buy another expensive battery. But if you want the best torque...

I used my 1/4 Dewalt impact driver for axle nuts on a Honda Accord lol rack and pinion was gone changed a few things with that impact and its still running its an older one but still works

You can also fix the dead play by adjusting the clutch sensor with a 14m wrench.

Will you shoot the video soon?

Muffler delete also or just GReddy exhaust?

I have a k20z3 that grinds 4th if I shift fast I have tried all these oil and nothing works save your money and just buy oem at the end of the day oil is oil I change my motor oil every 1-2k miles with super tech Walmart oil with no problems

A little tip: Toyota was actually kind of stupid for once and made a mistake. From factory, the fuel pressure regulator “vacuum” line is actually connected to the intake before the throttle body, so no vacuum. If you T the line into an actual vacuum hose, like the EVAP line that is right there on top of the intake manifold, it will give you significantly better gas mileage (won’t run rich at idle anymore).

Fuck yeah thanks dude

Just had to have the transmission replaced in my 2017 TLX. It’s faulty sensors inside the transmission. They built it as a non dealer serviceable component inside the transmission valve body. Need an Acura certified rebuilt transmission to truly fix it.

Very good & informative video! I would like to know so far how do you like the Yellow Koni shocks/struts? I need to replace the stock & worn out shocks/struts in my CW2, and I'm evaluating different options, including Koni Yellow & KYB GR2. I've also checked a couple of coilover kits, however I'm not sure if there're any that keeps the stock or almost stock height. I'm willing to lower my CW2 around 0.75" and so far the coilover kits I've seen start the drop at around 1.5", that's why I'm thinking about using the Koni or KTB. Thanks!!!

The suss part was hilarious, thank you for that lmao

Where are vacuum lines going into power steering?

Also you don't put fluid in the bottle?

How do you know when it's done

Is the 2022 oil change any different from the 2024?

Those things drink gas like hell.

#righttorepair #fixyourowncar #acuratsx

Perfect, to the point! Thanks!

Where did you get that intake tube?

Whatd you use for sound deadening and how to install?

I have a 2013 TSX and this is still the best video for our model year. I drained out 2 quarts but only managed to put in 1.7 quarts before it was dripping out of the fill hole. I don't know if it's because it's on stands OR if they just overfilled it a bit a the factory. It shifts fine though so I'm going to leave it for now. I used Honda OEM manual transmission fluid and I think 2 litres / bottles is enough. The fluid I drained out at 10 years + 100,000 km was very dark/black so it was definitely time to do the change. I accessed the bolts by removing the driver front wheel. Had to use a bunch of socket extensions ot access the bolts. Spray brake cleaner afterwards so you can keep an eye/make sure no oil leak. Thx for the video

very sus

My 325i could never

if it's straight up non dirty oil fluid, you could just leave it too

Ty bro I did not want to start jerking and twisting my shit without a tutorial first, good video bro, nice knob.

Is it turbocharge?

Did you notice any decrease in the harmonics/tire noise that come through the firewall after installing them?

Battery is good. Starter is bad.

how wide are the wheels?

I have developed a slight knocking noise after I installed these and it seems to be coming from the area where they connect to the firewall. Did you notice any added noise?

Where can I buy a socket set for this??