วีดีโอ

Ciao dove posso trovare il kit per fare una batteria bosch 18 V 8 a grazie

I need your help, after instaling kali linux, i can't boot it in to kali linux

I have a fried 4h core battery with good 21700 cells all in spec with resistance and volage. Seems the fuel guage, balancing circuit, and thermistor is shot. Its a unique system on on these. I was thinking of buying one of these but im not seeing the balancing system in this kit.

So did you build it?

Thnx, works for my 2960-S Series PoE+

Do this work on MSI Z77A-GD55

those batteries are bare for two reasons, one being thermal conductivity, but more important, the second reason being for getting the electrical contact to the balancing connections (there are flex cable connections on the negative bare shell of those cells, which does not seem to be present in this kit)

T7810 power supply mod please anyone???

Thank you

My psu have 5v standby but my t7810 motherboard needs 12v standby any solution ?

I have this mini pc. Your comment about having only 512 mb is correct but it can be configured. In the bios under AMD CBS, you can specify how much RAM you want to allocate to the GPU. I chose to allocate 4GB, but you can allocate more RAM if you need it. It shares RAM with the CPU so the more you allocate to video, the less you have available for the CPU. I did some research myself, and read where you shouldn’t even need to adjust the RAM from 512. It is dynamic in the fact that the system will use as much as it needs since it’s shared anyways. After changing the allocation to 4GB, I ran a few games and only averaged 1-2 FPS more from 512mb. So it kind of proves that the system will take as much video ram as it needs. I hope this helps.

Hello, I'm having the same problem. Could you measure the voltage at the backlight pins and post your findings? My tube ends are not readily accessible. Plastic covers the ends of the tube so I would have to cut into the Plastic to access. I'm thinking my high frequency circuit on the power board has issues. Not enough high frequency to turn on tube.

How good is this switch for learning networking?

Link down :(

on my t3600 it was working fine until I unplugged it, when I plugged in the power cord the pc turns on by itself but power button light doesnt show and doesnt work no display.

Hi es ist wirklich nicht böse gemeint, aber ein gut gemeinter Tipp, du solltest die Videos in Deutsch machen, das Englisch in der Form wie du die Worte aussprichst ist kaum zu ertragen das ist schade weil mich das Video interessiert aber ich konnte es mir nicht länger anhören. Sorry

Link doesn't work anymore. I need to do this with a Dell Studio XPS 8100 from 2010. Any help?

When i try to install win 10 on nvme to pcie adapter like ur i cant install it goes back to install now

Thanks, do you have a video explaining ssh connection?

I already have this for my windows install but today I installed ubuntu on the same nvme ssd and it wont show up in clover can anyone help me?

Where is the link?

stavo per rimandare tutto indietro! questo video mi ha salvato parecchio tempo ed energie!

Si tengo una fuente atx que diagrama uso del de la foto el de arriba o abajo no puedes esclarecer eso ? Un poco mas a detalle

Just switch 3v to 5v and other pins like blue legs are the same, right?

A little hint for old mobos with no uefi support to begin with, Use clover legacy and an old clover version like 49XX or something, put windows installation thumb drive only when clover successfully boots, You may need to exit clover, open the boot maintenance manager and navigate to the BOOTX64.EFI on the installation thumb drive, Then after windows is installed, use microsoft efi boot from efi to boot the installed windows. (windows 11 didn't work with me)

WhatsApp number

These how much money three pcs switch

donde descargo clover??

man how to be done with this i can not boot the pc,, i need all time to boot from usb

Thanks bro. Worked on my Optiplex 9010.

Ich küss dein Herz Bruder, vielen Dank.

Hello! I watched your video, it's great, I also have a T7910 workstation and I'm having quite a bit of trouble with its power supply as well. Have you ever done the same thing with T7910?

remove drive letter of usb on disk manager

Das Erstellen des USB Sticks mit einer älteren Version hat funktioniert. Ich kann von dem USB Stick booten und sehe die Startseite. Egal welchen Menüpunkt ich auswähle, es passiert nix. Kein booten, keine Fehlermeldung, es passiert einfach nix. Hast du eine Idee, woran es liegen könnte?

Kannst du bitte mal zeigen wie man den USB Stick mit BootDiskUtility erstellt?

if your had problem and just funcionaly one memory ram You can solution this remove battery on motherboard and waiting more fifteen minutes in my case I was wait more 8 hours. good luck!

i need one case for my t3600. what case yours used?

Sir plz tell mebabout u'r processor water cooling

does dis work with m2 or msata?

does 3 fans has to connect for power up ?

*************************************** Solution at the bottom of this text: *************************************** Does anyone know what the hell is wrong with my stuff? I've tried numerous configs, and bit by bit I'm almost getting it to work. First from a white background (CSM, and wrong version of the file "boot" in root folder of USB flash drive), to an almost usable menu like show in multiple images & clips, except no disk icon, until I hooked up my SATA SSD it showed three disks, and the first one booted that SATA drive, no surprise there, but was unable to do so with the other two. I could understand if the NVMe SSD that I have in a PCIe slot wouldn't boot due to mongoloid partition (MBR/GPR), it's just that without the SATA SSD, nothing shows up so I'm unsure what the hell's going on here. According to some tests with one configuration with the USB-stick (Tried multiple times) I was able to see (In shell mode) that the driver for NVMe had been loaded by typing "drivers", so it should by all accounts, work. But, no disk is displayed. I tried with installing Windows from another USB-stick in UEFI-mode to the NVMe-drive. The installation went like clockwork. Partitions were erased prior so it was blank. I read in some forums that the partition need to be GPR, so I tried to convert it in one attempt, but I was unsuccessful. I'm running out of ideas, so anyone has any idea as to where I did it wrong, or need more info, please holler. Thank you. ************* So, a small update: I managed to get a different result. Still no luck on getting it to detect the NVMe drive though. Gathered from several web pages out there, I think the problem lies with either the NVMee adapter, which seem to only support 2X (as reported by another computer with an identical adapter, although it's in an 16X slot (And the module should work at 4X, since that's its limitation). I also tried several other slots as this is a server motherboard it also have dual AMD Opteron 6378 16-core CPUs, thus it has enough bandwidth. The other probability is that Clover's NVMe driver doesn't support my motherboards. When testing on two other older computers, one with UEFI, and one without, I did manage to get it to save the log (F2-key in Clover UI), as well as screenshots. It doesn't list the GUID for the drive, but lists the other SATA SSD as well as the thumb drive. I was able to use the shell and access the command "pci" to list found devices, and it did see a "mass storage device" as "non-volatile memory", but no GUID. Here's where I'm suspecting the driver is failing. Although, the logs stated that it was loaded, but something about needing some configuration (don't have the log at the time of writing). I say, this Clover is a neat little utility, but the guys who made it sure as hell didn't make it even the slightest user friendly. I have almost 30 years of computer knowledge (Mostly DOS, later Windows, but a small dabble in Linux here & there over the years), so I'm not completely lost, but damn, I found this a complete mess, and GitHub is not easy to navigate, nor is some of the idiots out there who try to explain how to use it. I have yet to dive deep into some of the pages that I found links to, a Forum I think, to see if there's anything that would explain why it's doing this. Also, for some reason, on my UEFI-compatible PC, I was unable to get the shell64U (Says so, something about failing to load, then this name but no further info than that), and when I pressed F2 to get it to save logs, it threw EXCEPTION in mainly red on the left side, and some cyan blue on the right with garbage characters. If I ever get this working, I'm making several backups of this thumb drive because I don't ever want to redo this again, but that's a tall order right now. ************** So, another update. I tried something else, and lo and behold - It's finally working. I suggest you try this out if you're experiencing the same symptoms/problems as me: winraid.level1techs.com/t/guide-nvme-boot-for-systems-with-legacy-bios-and-uefi-board-duet-refind/32251/248 Just make sure to set BIOS to boot as UEFI on the boot devices (and probably set PCI devices to the same) I just changed that, since I got some "BErrorart" in red, and after making sure to boot in UEFI mode, it started right away and was presenting a menu that I worked so damn hard to get loading using "regular" Clover by following several other "guides". This just worked, right the F off from the start. Just make sure to follow the tutorial on the site and you can't fail, or, at least I hope it won't....

daha net çek resim at aynısını yapalım

Hello , nice helpfull video , i see u used DELL Workstation MOBO may its T3610 , are you use standart ATX PSU or some adapter.

Hello , nice helpfull video , i see u used DELL Workstation MOBO may its T3610 , are you use standart ATX PSU or some adapter.

How to set autoclover boot. ?

Thank you!

I have a question for you guys regarding "PC that can't boot NVMe". We have a PC with "SATA-HDD+NVMe-SSD only, Linux installed on HDD, this is Tool, Clover written on HDD-ESP, 21H2-USB installed on SSD, when rebooting, WindowsBootManager is at the top of the list. Enter UEFI-BIOS configuration mode, rearrange the order to Clove's kick (hd1,gpt1)/EFI/clover/CLOVERX64.efi (hd1,gpt1 at the top, Ubuntu - 2nd, WindowsBootManager - 3rd, HDD - top 4th, and reboot) The installation continued, the SSD became the start screen, and Win10-21H2 was successfully installed and rebooted. Question Can you please write down the main points and the order in a way that I can understand? No. I plan to do this in turn to other "NVMe unbootable PCs". Translated with www.DeepL.com/Translator (free version)

Thank you for this Video. I want the COLVER soft. Would you like tell me, Where to Download the soft, and how to install to the USB.

Hello, I'm from Algeria. brothers. I want to do the opposite for my dell t 5600. I want to run the 630w power supply on an intel i9 12900kf motherboard.We knew that the dell power supply does not contain 3.3v, but I think it is possible to adjust 5v to 3.3v? is it possible?Thank you

Cool!