วีดีโอ

Dude, this was exactly what I needed! It was so easy to remove the back, while the changer was still full, to replace the belt. Sadly, I still have two issues that I don't think I'll ever fix: 1) The chip seems to overheat, as it will only play on shuffle for a couple hours before erroring out and 2) the PS/2 keyboard connection doesn't work; Guess I'm labeling my discs the hard way

Thank you for this video. I resurrected my player after about 20 years in storage for about $12. The old belts were just black goo at this point. Much appreciated!

Thank you very much for this, your video helped me to solve my problem

Thanks for sharing the shortcuts to change the belts. Super easy to do, the 15 year old belts on my CX355 were super stretched out. Simple through hole components with no SMT , thanks for mentioning the ESD straps as it’s easy to pass static electricity to the components.

I just replaced my belts yesterday on my TC-WE475, neither player would play, but for a couple of seconds, then began to "eat the tapes". The smaller belts (both) were melted to the spools, I found. I kept looking for the belts in the electronics, but they were nowhere to be found. So, while installing the new belts pieces of the old belts stuck to the new belts as they turned. I had to clean the melted belts off the newer belts, after I installed the replacement belts. It seems the old belts broke and were stuck under the large pully, as I tried to get it to work, the old belts got hot from the friction which melted the old belt to the pully. In the end, it turned out that replacing the belts resolved the problem.

I have just, finally, been reunited with my record and CD collection of over 10,000 albums and singles, and shipped them overseas after 17 years in storage. I couldn't wait to put the unit that stores them together again and get playing. My joy was short-lived when I discovered that my Sony 300 CD player, my single CD player/recorder and my amp had 'issues'. Thank you so much for this video I am gonna attempt to fix this one first before I move on to trying to figure out the amp etc. This video is so complete I'm feeling confident...Pray for me 🙂

This is so useful, thank you

Excellent video, thank you. I have a CDP-CX250 but I'm not sure what belts will work for it. I've looked but can only find CX-300+ compatible belts. Will the same ones work on the CX250?

Which would be the diameter for a cpl filter for this camera? Thank you!

Thanks I thought it had broken and wasn't until I watched yours did I realise it wasn't

Lion king is my favorite movie ever 🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🦁🩷🩵🤍❣️💖❤️💙🤎💕💘🧡💜💞💝💛🖤💓💚🩶💗

Is the descale accessory required to descale? I tried running mine without it and the descale button would not change color :/ I'm now wondering if i need to purchase the accessory or if my machine is broken altogether

Woow ! Thank you so much for your help. You saved My new coffee machine !!! Thank you sooo much !🎉

Thanks for all the info you shared. I changed the belts with some replacements I cut and superglued to get to fit 3 years ago. They are still operating the transport. I now have developed a playback problem. Display shows the number of the selected disk, disk loads, spins, but the display does not change to show the disk info. (time, decrementing). I cleaned the optical sensor...but no change. Any troubleshooting steps that may lead to getting info on this problem would be appreciated.

Great help, I thought it machine or myself, thank you.

Excellent video and I just fixed my Sony 300 CD after using it for more than 10 years. very concise and professional explanation and it saved me a lot of time by accessing from the back, the video is worth 5 stars plus, thank you very much for taking the time to post it!!

Hi I have the same machine but the frothier will not froth the milk. Any ideas cheers

Thanks mate

Speed 2x too slow to watch it😢

JAF patch you sew the velcro backing piece onto clothing or bags then stick the front patch onto it. Used in the forces for easy removal of I'd names.

Thank you so much for this video. I was all ready to throw it out the window.

Awesome video, just wondering if you experienced the 2x 1.5a fuses popping aswell? My machine runs fine until a disc is inserted. Any thoughts would be appreciated

My belts are steached out like yours in the video but they are not "dry". They have a bit of lubricant on them. Is this a problem for the new belts that I ordered? Should I clean it up off the pulleys? Thanks

Thank you so much for this video. I have two of these equalisers and both displays flicker. I have a request, would it be possible for you to make a video on how to replace a rattling cooling fan on Technics SEA909 power amplifier?

I had this problem with a Magnifica start, it was only three weeks old, it just kept squirting out of the steam nozzle for at least three hours and I took it back to the shop for a refund.

Best video I found explaining the process. Thank you so much

Never seen this before. Great video & info. Link to site & price? Thanks

Thanks a lot for your imput, you save my life literally 😊

Won't power back up!

not big enough lol :-)

Thanks

I have seen / read / heard many disliking the TCM190 transport. Basically saying they're unreliable & problematic & the small gear breaks often. Have you, Sort It Out Man had any major issues with them? Greetings from Trinidad

What is the next size down from a hundred inch👍

It that size you want 8k resolution

You can pick this massive TV up for under £1900 in the UK currently - has to be a bargain dont you think if you can fit it in / afford it?

Adorable Review!

Where did you get the new pinch rollers? From a search I did it is mostly China.

Excellent video thanks.

What do you thing of these? On listening back to the part where they are in use, I`m quite impressed for the money!

Ffs how many adverts can youtube fit into a short video.v

fast forward the video

What a terrific tutorial, but I have another question about this unit. Some of my CDRs aren’t being recognized. Should I clean the lens as you mention (I do have a lens cleaner disc though?) or is this an issue with the laser? The CDRs play fine in other machines.

Quick question can you play videogames ps5 on this tv ? 🙈 it's for a family member

Great video, just bought one second hand off eBay saying that the fuse keeps blowing, hopefully an interesting fix

Hi, Great equipment. I have a Technics from the 90's. Sorry it's not related to this video. I just wanted to ask about your Swarey ultrasonic cleaner. Are you satisfied with it or would you buy another brand? I'm asking because I want to buy the same one or Vevor brand and I don't know which one to choose. I think Swarey would be a better choice but I'm not entirely convinced. 🤝🤝

I get one of 200 cds, but the display is a little faded. There is someting to fix this faded display?

Thanks! This help me a lot

in my case it didn't help. I ran 4, 5 water tanks every day for a week and still nothing.

👍

Thank you so much for your help! Was ready to return! How is it no one else can explain it like you?! 👍👍👍