วีดีโอ

A couple other thoughts.. depending how thick your top is, mount this from the underside and then if you ever need the surface you can pull lamp out and nothing will be in the way. Also another idea is two flat metal plates one flush mounted to the top the other mounted underneath and each have a hole like you drilled here aligned and all is flush and no top interference. I just this week finished repairing an ancient ring light magnifier lamp and replaced the fluorescent with LED, huge improvement. Light is so much brighter... Cool video keep making them and we will keep watching.

Well ok thanks for the teardown video. I think that the slop that you attempted to improve never mattered except getting that center bolt back in and cleaning the shafts and threads is always good. I have one and it's just not a precision vise but it does the job until the e-clip breaks. Then it sorta still works.

I like it quite a bit, you sir think like me...

Everything was well thought out and intentional. May I ask why the downward facing bolts were left so long?

I have this exact one, and I'm trying to figure out what the black piece in front of the washer on the spindle is, that you referred to as the "clip", and is that a part that is readily available to replace? The one I have does not have one. Can you tell me if there's a specific name for it or what size it is? I can't seem to find any replacement parts online for this particular model.

No way I'm keeping a tool I just spent $700 on that has a chewed up gear in it. It's getting instantly returned for exchange 🎉

Why does he bother with a file when he has a disk grinder?

That's pretty cool

I wanted to bend some stainless. Will it bend 26gauge or 20 gauge stainless

Built a similar brake a few years ago but i noticed after a few tries the bolt will bend , my solution was to add a steel 45 degree bracket to each bolt , made a huge difference.

that bloody musick...sic!

Need some instructions on changing out top thrust bearing.

This vid shows me that you've worked around this type of hardware but not with it much. Seems like it's set up for others to toil over.

Well, gee...this sure beats me hammering a bend with a hammer and a steel ruler. I built a heavy duty doggie door for a window this way and...it "works" but the aesthetic factor is not exactly there. Doggies didn't notice. Whew! Loved your video!

Que calidad me llega saludos desde aca

Our Pittie learned the same trick. I saved a whole truckload of work by just locking the window lock on the driver side as we are driving. One push of a button and problem solved.

Was enjoying the content, but finally couldn’t take that horrid background music.

Would you sell it?

How Cool is that!! Where did you go?

Nice work on the metal break! Have you ever attempted a metal finger break?

What's with the freeman stuff at the begining?

A family man

Well dince you hot your first Blemish on your machine because you dropped a yool on it it's all down hill from here😊 Like your first Shopping 🛒 cart scratch on your new car😅

Damn thought the music was over then it started again 😮 Don't know why everyone seems to think they need background music on these tutorials 😢

LIFTING: Yep, I already have a bad back. Live in an area where my closest friend is 20 miles away. Solution when I need to lift from the floor to the bench? Harbor Freight lift table, wheel it over to what I have to move and lift. Get it on table then go to where it needs to go. IT’s hydraulic so my foot pumps it up. Easy Peasy.

Nice job Geno. The jeweled hinges look great. Only other thing I'd do is shorten the carriage bolts and hinge screws by 1/2 at least. Would help clean up the job, etc. All that work but the long screws make it appear unfinished.

Would you use the big one to pull a seized rotor?

Love it Gene! (now turn that $ sign around 😉)

Бл еще раз скажу , не спиной надо поднимать, а ногамии

💯💯💯

Just got these to try and pull a 50 year frozen brake rotor on a riding mower. Wished me luck😂

Thank you very much. It worked for my obsolete Sylvania fan remote.

Buenas tarde excelente herramienta hermano gracias por compartir sus conocimientos saludo desde Venezuela Edo Carabobo Ali Molina bendiciones 🙏

How much did this machine cost ?

What's the steel gauge limitation?

Is it worth fixing with time and costs compared to buying a new one? I’m comparing your video to another who just basically drilled a new hole somewhere… honestly I don’t know what to do. I don’t think I have half your patience. Ugh.

they should've made it to cut metal too.

You are prettyhandy in the shop but your choice of backing music is unbearable.

Love the build! Will make mine 8’. To bend welded wire for cages

Your background music is so annoying I turned off the sound

Sangat menikmati pekerjaan👍

Best diy metal bender video I've seen on here

🤝👨‍🦱✍

I like it all except the wingnuts. Good job.

You wanted cheap, you got cheap! You should have gotten a good metal case good quality switch!

I would replace that cheap rocker switch with a good toggle switch!

Just find out how many amps that uses and get a compatible switch!

Buen trabajo, SALUDES DESDE HONDURAS

Good work

Hi Guy, why have you chosen a mini drill machine instead of a Big one though you have enough place in your workshop and at what Time ones should purchase a Big one...i am planning to become a hobbyist machinist. Thanks