วีดีโอ

THANK YOU SO MUCH YOU ARE MY ANGEL

How do you get the bottom piece open

INCREDIBLE HOW CALM YOU STAY ... O ENTHUSIASM TO THROW THIS STUPID MACHINE OUT THE WINDOW

Thank you!!!!

I am so HAPPY. I just repaired my M1000 that stopped sewing after a bobbin thread/needle thread/tension jam. I bought a folding Craftsman 9-key metric hex kit at Lowe's for $10. The smallest hex wrench, the 5/64, fit perfect. BUT I loosened the 2 hex screws under the machine too much. That made the manual hand wheel stop working (it no longer moved the black bobbin case OR the 2 hex screws at the bottom!! Thought I was screwed because now nothing turned so I could not retighten the hex screws because they were no longer visible beneath the machine. So I laid the machine on its back and reached into the black bobbin "cup" on top, and manually moved it so I could see the hex screws at the bottom again. It worked! Then I tightened up one hex screw slightly (but not all the way). Next I set the machine upright and attempted the fix again by moving the black bobbin "cup" so it aligned with the needle as it came down (as KT shows us). Then I put the bobbin thread back in, screwed the white plate back into place, and tried to pick up the bobbin thread with the needle. IT WORKED!!! Then I sewed a few inches. Beautiful. Next, I am going to fix my older, larger Singer that has refused to do a zigzag stitch for years. It only does straight stitch. I read this is also a timing problem. (●'◡'●)

I’m about to just throw this stupid machine away. This always happens.

Saved my night. Thank you!

Hello, I wanted to thank you for your video. I am having so much problem losing the screw. Can you tell me if I am supposed to turn left or right to be able to unscrew the screw under the sewing machine to adjust the timing?

I listened my screws and adjusted the catch/black part but when I flip over to re tighten the screws to test they are moved and only show when I re turn the black part back to where it was?!? How do i re tighten the screws after? I wish you showed that step im so overwhelmed 😰

Just got a singer M1000 pre owned. I am a total noob and i was frustrated to see that the thread won't loop from the bobbin. Your tutoral was just the one i needed. Thank you!!

Thank you so much from Italy!!!!!!

Dude has to be trolling. His machine isn’t even functioning properly. 😂

Just bought Singer M1005 yesterday and got the same problem. Trying to fix by following other tutorial but it makes my energy drained. Then your video helped me, it works really well with not much effort, perfect for a machine noob like me. Thanks a bunch man!

Lifesaver! Thanks bro 🙏🏽

THANk YOU!!!!

I fixed it. Thank you so much

Ahhhhhhh thank you so much!!!! I picked up this machine for $13 at Goodwill. I almost threw it away. Then I found your video! Thank you.😊

I fixed the timing, but now my bobbin thread is loose

It works thank you!

THANK YOU! I bought my machine new and immediately this was an issue - imagine my frustration, especailly when I found out the nearest Singer warranty service person is over 100km away and I don't own a car! Grrr. This tutorial was exactly what I needed! You're awesome.

Awesome! Thank you!

Help ! I have loosen the screws and did everything like in the videos and it is still not picking the treat underneath 😢😢

Thanks a lot I was having this problem and it works ❤😅

Nope didn’t work. I tried everything and retreading machine. Still needle comes up empty. What now?

Thank you for help

Thank you so much. Most helpful!!

This made the trick!!! I would add that there are TWO Allen screws on the bottom (I'm not a native speaker, so maybe I missed that part)

No sale poque la aguja se queda arriba cuándo pasa el enganche por ai

La mía no sale l

Yo is

Yo Ise todos e

Por favor yo quiero el vídeo en español

La aguja queda arriba cuándo pasá el enganche

Yo lo quiero en español

My problem in singer M1005 solved as per your instructions.. Thank you very much .

When catch is rotated, the needle goes up and down. You can't just rotate it to the needle. I need a little help.

Thanks for the help😊

Oh wow!!!! This worked. I had to go to the hardware store to get an Allen hex key size 2mm. Thank you so much.

Wow! This is so amazingly helpful! My machine stopped working over 2 years ago after only about 2 uses and I couldn’t figure out what was wrong. I was planning on getting another one but decided to find help on TH-cam. This video really helped! I am now able to sew all my clothes that had been waiting for the last couple of years. Thank you so much for these instructions.

The little allen wrench screws are so tight I can't loosen them at all

Very good video. We solved the problem at home. Thanks sir👍

if i lost my screwdriver key thing, what can i use?

Thank you so much. It worked !!!

How to position the bobbin wheel back again? It jumps off the place when I try to rotate the hand wheel.

Very good tank for this

Thanks!! That’s so helpful.🎉

The link to buy the alley key doesn’t open, please help! Thanks

Meh im trying to find the cover i need

Thanks bro😊

My machine it’s not working I was trying but I’d know how repair bro can solve my problems and help me