- 29
- 92 142
Hadron Airsoft Designs
United Kingdom
เข้าร่วมเมื่อ 4 ก.พ. 2021
Product information and fitting guides for our line of airsoft products.
Introducing the TAC-41 "Medusa" hop adjustment system by Hadron Airsoft Designs and Snipermechanics.
Revolutionize Your Sniper Gameplay with the Hadron Airsoft Designs and @Snipermechanics Hop Wheel Adjustment System for the Silverback TAC-41!
Simple fitment, in fact so simple I recorded this on my phone, while fitting the system with one hand..
Welcome to the first in the long line of collaboration products with the great Snipermechanics. Hadron Airsoft and Snipermechanics have worked on projects together for years, however, this is our first public joint product in the portfolio. Introducing The "Medusa" conversion, for the Silverback Tac41.
Medusa represents a primordial force of chaos and destruction, embodying the untamed and unpredictable aspects of the natural world. Her petrifying gaze can be interpreted as a reminder of the inherent danger and potential for devastation that exists within the natural order.
The Medusa system is a fine pitch hop wheel conversion for the Tac41. Suitable for AEG and GBB Silverback hop units.
Medusa consists of a fine pitch adaptor, high tensile fitting hardware, and the laser engraved tactile adjuster wheel which uses the stock silverback detention ball bearing. The tactile feel of the Medusa is simply amazing, and intuitive. It's useable with bare hands to the leafiest ghillie gloves, yet still unobstructive to scopes.
Medusa conversion fits in seconds, removes in seconds, and can be removed if needed without upsetting the hop setting. Works fantastic with the stock Silverback nubs, the Chubb nub, and the Hadron Tac Nub.
Medusa applies pressure to the nub from directly above, and not from one side or angle. This flat pressure approach leads to more accuracy in BB trajectory, and tighter grouping at longer ranges. This must be one of the simplest upgrades for the Tac41 sniper series.
#hadron airsoft designs #hadron airsoft designs medusa #snipermechanics #snipermechanics medusa #tac-41 hop wheel #tac-41 medusa #tac41 hop wheel #tac41 medusa
Grab yours here
www.empireairsoft.co.uk/tac-41-medusa.html
@SniperMechanics @EmpireAirsoft @kickingmustang @hadronairsoftdesigns@SilverbackAirsoft
Simple fitment, in fact so simple I recorded this on my phone, while fitting the system with one hand..
Welcome to the first in the long line of collaboration products with the great Snipermechanics. Hadron Airsoft and Snipermechanics have worked on projects together for years, however, this is our first public joint product in the portfolio. Introducing The "Medusa" conversion, for the Silverback Tac41.
Medusa represents a primordial force of chaos and destruction, embodying the untamed and unpredictable aspects of the natural world. Her petrifying gaze can be interpreted as a reminder of the inherent danger and potential for devastation that exists within the natural order.
The Medusa system is a fine pitch hop wheel conversion for the Tac41. Suitable for AEG and GBB Silverback hop units.
Medusa consists of a fine pitch adaptor, high tensile fitting hardware, and the laser engraved tactile adjuster wheel which uses the stock silverback detention ball bearing. The tactile feel of the Medusa is simply amazing, and intuitive. It's useable with bare hands to the leafiest ghillie gloves, yet still unobstructive to scopes.
Medusa conversion fits in seconds, removes in seconds, and can be removed if needed without upsetting the hop setting. Works fantastic with the stock Silverback nubs, the Chubb nub, and the Hadron Tac Nub.
Medusa applies pressure to the nub from directly above, and not from one side or angle. This flat pressure approach leads to more accuracy in BB trajectory, and tighter grouping at longer ranges. This must be one of the simplest upgrades for the Tac41 sniper series.
#hadron airsoft designs #hadron airsoft designs medusa #snipermechanics #snipermechanics medusa #tac-41 hop wheel #tac-41 medusa #tac41 hop wheel #tac41 medusa
Grab yours here
www.empireairsoft.co.uk/tac-41-medusa.html
@SniperMechanics @EmpireAirsoft @kickingmustang @hadronairsoftdesigns@SilverbackAirsoft
มุมมอง: 1 138
วีดีโอ
Hadron Airsoft Designs LCP2 TDC upper conversion kit - Due Jan 2024
มุมมอง 1.1K10 หลายเดือนก่อน
Following on from the original Bodyguard 380 TDC kit, we are proud to introduce the LCP2 TDC conversion kit for the tiny Tokyo Marui pew pew. Available in M16CW or M14CCW fitment. Airsoft TOY REPLICA @EmpireAirsoft @SniperMechanics @hutchyairsoftsniper538 @kickingmustang @airtacjames2532
AAP-01 Airtac drum conversion - more pew pew for the pew pew.
มุมมอง 1.6Kปีที่แล้ว
The Airtac is a brand of airsoft magazine adapters that allows users to convert their airsoft magazines to fit different types of rifs. These adapters are made with high quality materials and are designed to ensure a precise fit with minimal wobbling or rattling. One of the most notable features of Airtac magazine adapters is their ease of use. These adapters are specifically designed to be use...
TM Bodyguard 380 extended airsoft magazine comparison
มุมมอง 2Kปีที่แล้ว
Just a quick fun video test and comparison of the TM 380 Bodyguard extended capacity magazine v stock capacity magazine. These little pistols are fantastic, and a great stealthy alternative to the MK23. I picked up the TM Bodyguard from Longbow BB in the UK. :) This little 380 beauty is now working unbelievably well and, and is always used in every skirmish. So small yet quiet.
SRU APX-01 review, assembly, and install of Hadron Airsoft Designs LOKI TDC unit.
มุมมอง 4.6K2 ปีที่แล้ว
Here we unbox, review and assemble the SRU APX-01 Carbine kit. During the assembly we install the LOKI AAP TDC hop unit, and drill the carbine kit upper. Its a long video, (apologies) with quite a few details to cover. I have tried not to cut much out, and there was no practice run. I find trimming videos down, can sometimes loose the lessons that are learned. @SRUdesign have done a great job o...
Tokyo Marui "Curve" airsoft review and bench test
มุมมอง 5K2 ปีที่แล้ว
I picked this little NBB from Defcon Airsoft. Its a tiny work of art. Great service from Defcon, it arrived next day. In a nutshell, its a well built unit, and extremely reliable.. plus its tiny, so team small hands will have no issues handling it. In the video we cover some compatibility between this "Curve!" and the other TM variants of the platform. Gameplay videos, and shooting tests will f...
Snipermechanics TAC 41 GBB head V Silverback GBB head comparison
มุมมอง 9692 ปีที่แล้ว
Here we take the latest offering from Snipermechanics for the TAC41 airsoft pew pew. The damped GBB cylinder head. One simple @SniperMechanics part makes such great gains, over an already well performing Silverback head. This is available from www.empireairsoft.co.uk/ and all other @SniperMechanics sellers globally.
Snipermechanics HEX Airsoft suppressor - In depth review and analysis
มุมมอง 4.2K2 ปีที่แล้ว
We took great pleasure in diving into the latest @SniperMechanics product, the HEX suppressor. The HEX suppressor was purchased (pre-release) from www.empireairsoft.co.uk , yes, that is correct.. purchased. The tests were completed using a variety of RIF, timestamps below:- 8:15 Mk23 - (SSX23) Hadron Modified - 0.25bb 11:00 Bodyguard 380 - Hadron Modified - 0.25bb 13:15 AAP-01 - Hadron Modified...
Hadron Airsoft Designs "Loki" TDC hop unit installation for the Action Army AAP-01
มุมมอง 11K2 ปีที่แล้ว
In this video, we cover the full installation of the "Loki" TDC hop unit, into the Action Army AAP-01 airsoft pew pew. We used the stock barrel, with a "Snipermechanics" Flamingo 60 degree. Its a simple procedure, using minimal tools. Enjoy the 0.2 to 0.5 bb lifting capability, with incredible long range accuracy. Get causing some mischief with the "Loki" TDC #hadronairsoftdesigns #HadronLokiTD...
Mk23 Hadron Airsoft Designs upgrade tutorial - MTDC, HARM-V2, Sniper Mechanic Flamingo 60 bucking
มุมมอง 10K2 ปีที่แล้ว
A quick basic video, showcasing the parts required for a simple and effective upgrade on the Mk23 STI/ASG. Parts used - Hadron Airsoft Designs MTDC with SINGLE SCREW plate Hadron Airsoft Designs HARM-V2 Snipermechanics Flamingo 60 degree Warhead 0.32 BB This pistol saw a 25 FPS increase on 0.32 (test bb) before and after. It will now hop between 0.2 and 0.5bb on this setup, on the stock barrel....
Hadron Airsoft Designs G17 G18 TDC Outer barrel installation
มุมมอง 2.7K2 ปีที่แล้ว
Hadron Airsoft Designs G17 G18 TDC Outer barrel installation
Wolverine Airsoft MTW-9 Scorpion EVO High Capacity Magazine Hack by Hadron Airsoft Designs.
มุมมอง 2.7K2 ปีที่แล้ว
Wolverine Airsoft MTW-9 Scorpion EVO High Capacity Magazine Hack by Hadron Airsoft Designs.
Wolverine Airsoft MTW-9 Unboxing, review, and analysis - We think a new benchmark has been set !
มุมมอง 3.7K2 ปีที่แล้ว
Wolverine Airsoft MTW-9 Unboxing, review, and analysis - We think a new benchmark has been set !
Mk23 Hop unit diagnosis and correction.
มุมมอง 2.1K2 ปีที่แล้ว
Mk23 Hop unit diagnosis and correction.
Gorilla Airsoft FCU install into a Wolverine MTW Inferno 2 edition
มุมมอง 5K2 ปีที่แล้ว
Gorilla Airsoft FCU install into a Wolverine MTW Inferno 2 edition
Silent Industries MTW bolt catch installation
มุมมอง 1.4K2 ปีที่แล้ว
Silent Industries MTW bolt catch installation
Silent Industries MTW hop arm installation
มุมมอง 6582 ปีที่แล้ว
Silent Industries MTW hop arm installation
Hadron Airsoft Designs Mk23 "Saviour" Magazine catch installation
มุมมอง 2K3 ปีที่แล้ว
Hadron Airsoft Designs Mk23 "Saviour" Magazine catch installation
Action Army AAP-01 with H.A.D "Bouncer" short stroke / 300% Nozzle spring installation and test
มุมมอง 3.7K3 ปีที่แล้ว
Action Army AAP-01 with H.A.D "Bouncer" short stroke / 300% Nozzle spring installation and test
WE Galaxy modification, Flamingo bucking, and H.A.D Nozzle spring.
มุมมอง 4.1K3 ปีที่แล้ว
WE Galaxy modification, Flamingo bucking, and H.A.D Nozzle spring.
Hadron Airsoft Designs Mk23 Nozzle modification
มุมมอง 7K3 ปีที่แล้ว
Hadron Airsoft Designs Mk23 Nozzle modification
Hadron Airsoft Designs Mk23 Feed lip installation
มุมมอง 4.1K3 ปีที่แล้ว
Hadron Airsoft Designs Mk23 Feed lip installation
Thanks so much for this!! Just did my first one, and it feeds flawlessly. Cheers!
I have the real one of the magazine is not inside you can squeeze the trigger
Just fitted Loki,Maple leaf and flamingo bucking to mu AAP01C. Things a beast on hpa. Love your products. If anyone has an AAP dont buy any other hop unit. The Loki is the one.❤
I really need you to do a tdc for the asg scorpion evo!!
Giving birth looks easier then this
Game changing bit of kit this
It does look badass without the handguard lookin really short 😊
Brilliant, nice clear video and instructions, thankyou
If you're using this with the hadron tac nub would still you use the nubs metal bar that centers the pressure? As this doesn't have a slant on the hop wheel I would assume the tac nub can be used without the bar, is this correct or would you still recommend to use it?
With or without pin..? Go without now as no need to counter the hop pressure angle from stock hop wheel. Medusa is a direct down pressure
How did you take the pin out as Iam struggling to get mine out
The pin is inserted from one side only. It can be punched through though. Hammer and punch is essential, over a block or something with a hole to allow the pin to move through.
Whats this even do? No numbers or anything how you even tell what hop your shooting at
Why do you need numbers . Stock numbers are 0 to say 10, over 0.5mm total throw. Set by BB flight.. sit back and enjoy the results;)
You don't need the metal pin now on the medusa so you can remove it :)
Usless mod 😂
@@gerritjanhavinga4449 you spelt "game changing" incorrectly mate.
@@hadronairsoftdesigns sure man that weel is so much better than the originel 🤡
💙👏🏻
18:30
Having serious fps issues in full auto and tech is informing me the loki is the issue with a 240mm barrel...what is the longest recommended barrel to use with loki?
I got this today! Hopping 0.32 no problem with stock bucking. On another note im struggling to replace the barrel. Any ideas how i can take the barrel out?
Small grub screw in the black plastic mount under the bucking. It's a really tiny one. Some barrels come with the Allen needed. Remove the grub, and slide the whole assembly forward out the guide.
When’s this going to be available! February is almost done and it was due for January?
Are the mags compatible with the bodyguard 380? I have a hpa airtac adapter for the bodyguard 380 and wondering if it wil fit this badboy to ?
Hope this is soon, cannot wait to pick this up.
It's already february do we have a release date? Tank you!
Great video! Very informative thank you. I was wondering though, what type of glue did you use on the stripped screw holes incase I encounter that problem as I've heard it is a common issue
I tend to use a slower acting glue if the threads are almost in tact. If however the thread has gone totally, i may use a faster glue, and not fully tighten. Once its cured, a little nip to tighten. Its really decided on the fly.
@@hadronairsoftdesigns ok cool thanks very much 👍
Thanks for this Steve. We met in Malia couple years back. I bought an aap then found your video. Thanks and best wishes 👌
Hi Neil, i remember :) I hope to get over to your neck of the woods for a few games this year. Its been crazy here for lack of free time.
@@hadronairsoftdesigns were out on swat next Sunday for the first aap outing 🤣 hopefully see you on there 👍
Does it increase the fps any
Hello! is it ready? Where can i purchase it please?
Just need an aftermarket bucking now
What size key do you need to adjust the screw ?
Thank you. It will be on sale at the normal sites?
Oh yes!!!
Epic, such a great improvement for these little pews.
How does this compare to the 4” Gen 5 Phantom suppressor?
I haven't tried, it's easy to compare by ear, but .. this has, and has been unsurpassed as yet
@@hadronairsoftdesigns Would you do a comparison video for us, pretty please?
Can you see through the ghost ring with a suppressor on? It looks like the Hexx may be obscuring it.
If it’s anything like the Bodyguard slide then it’s really not an issue for airsoft purposes.
First ;)
Hi. Snipermechanic damper piston head, work in Stock or mausefart piston head?
Hey Buddy, it should do yes
does the hplate-v2 work with the loki?
I have the real thing, great 380 but whats the point of it as airsoft?
In the UK, we are not allowed anything like this real steel. This is as close you get. Small, light. and reliable though. Simple RIF
Thanks for the video. Im thinking of getting one. 👍💎
DOes the Loki Hop unit work with the tti Carbine Kit? As the Carbin kit hast the TDC already preinstalled...
Can i use a 60° in the AAP or is a 50° better?
I do prefer the 60 degree.. unless really cold weather, and gas is cool.. i may grab a 50 for that.
i already got the action army hop with the panthera nub but im honestly debating on getting the loki instead
I have one CNC H plate for my aap01 with flamingo A50. Question. How to install it. Which surface sould touch the numb, the flat or the curved?
Curved side down ;)
@@loops01 above or below the hopup arm (sorry if im mispronounced it)
just got mine last week and out of the box it was nice and honestly quiet however i am still new to airsoft so what is there to know about hop up and its effect for this gun?
Ive just fitted the kit with the 300% nozzle spring and light weight bolt, but what do you find is the best recoil spring to use.
What are the differences or benefits with the different amount of adjustment threads. Just got the ASG mk23 and about to order the TDC and want to check? TIA
The threads are a balance between stability, durability, and adjustability
If I was looking for a new recoil spring and spring guide, would I be looking for a G17, 18 or 19 models for parts? I can't seem to find that information anywhere and it's driving me insane.
Im wondering the same
Do you customise everyone's guns or just your own mate. I'm looking to get mine upgraded
We can do most yes ;)
@@hadronairsoftdesigns how do I contact you please
Any news on a tdc for this? Love my mk23 but... this would be a pretty sweet alternative
I need help, i use the 300% Nozzle and Light Bolt and the BBs falling down out of the Barrel. (ONLY WHEN I USE HIGH ROF.
I have same issue, did you find a solution and still be able to use the 300% nozzle spring?
Does it work with the fuku 2 long cutout upper
How do you unlock it to full auto??
Can you make a video for the TM HK45?
Got a couple of extended mags and Snipermechanics' HEX suppressor. Any recommendations on holsters and mods very gratefully received, thank you.
Want to sell any of your guns