วีดีโอ

Thanks a lot, this was helpful

Do you testing game bro? Does the upgrade improve fps? I have 4200m but want to upgrade pls answer it wil help me 😭🙏

Thank you, thank you, thank you .😭😭😭😭

thank you so much for yours explications

Is it still good now?

A Logitech MX keys very soft of all keys.

You did the miracle with simple tools, amazing job.

impressive results!

Thank you so much!! it's Christmas Eve and I've been working for 4 hours trying to get my wheel unlocked. There was no wiggle room at all. It was really locked! i tried 5 or 6 different methods, even disengaging the shift and putting it in neutral. nothing worked and I was so depressed and then I saw your video! it worked right away. thank you so much for making this video. I subscribed to your channel.

Thnk you good video and gret explain of it!

But the repairer said I have to change it.

If you used copper welds with the whole surface coming into contact with the heatsink, you could easily manage more performance

Btw facelift (with led strip on top) the system is different and bulb comes out together with connector. The connector has a clip that holds it and the bulb in place. The bulb itself isnt held in by anything. Its the connector that holds everything. I tried to fit led headlight bulb, but its not possible for this reason.

U the best

Thank you for your good work. I have a Lenovo ThinkPad W540 circa 2014. I once opened up the pack and replaced each cell. The battery "locked up" and Windows complained no battery detected. Apparently, power may not be lost to the battery controller in the pack, as it will lock up to defeat you. I don't know of any easy way to unlock it. Then another battery pack which I had opened, accidentally shorted. The pack has no V+ on pins 6 & 7. However Windows detected the pack (there is an I2C connection between the pack and the laptop, and certain codes are exchanged). I am checking the thermal fuse in the pack - as this may be the source of the problem. If that does not work I will try connecting V+ directly to pins 6 and 7 on the pack, as it has worked for this channel. I don't believe it will work with this model as the I2C handshake may defeat it.

Hello Roby, I wonder if you are satisfied with that OBD. I would like to buy one from China, but some comment bady about copy products selling in Chinese sites.

Is that level line with arrows and a book a max level, minimum level or an optimal level?

I have same car but WITHOUT tyre sensor.. Why do i still have this warning all of a sudden?...

nice job. but a couple of things. 1) why don't you turn around using the other end instead of bending it? Copper heat pipe are made to be hollow with a tiny bit of moisture and some rough surfaces inside this hollow space to allow evaporation to travel up and down the heatpipe. bending one end might cause a trapped air space it might pop in the worst scenario. 2) If you glue the fins of the air outlet, wouldn't your glue slip into the spaces of the fins and block the fan?

In my case it was the DDS button in the central panel that did the reset after holding it for 4 seconds, as stated in the cars manual 😉

The thermal paste thing will actually be problem for the near future because it drags quick, you can probably use ptm since it suppose to hold over 10 years but thermo epoxy could also be better and soldering ideal, but the thermal paste is definitely the worse, with an expectations of just a few months Maybe, just maybe don't glue it to change the thermal paste and just attach it with tape or something that makes it removable

Hmm , I got a stain don’t know if it’s due to microfiber cloth or hand sanitizer but I have a stain now , the ink mark tho is gone

Can you please drop a contact..I've got some questions

@diyroby the keyboard is supposed to be noisy, that's why it's called Calliope. Lenovo also sell the traditional keyboard which is probably what you're looking for. It would help if Lenovo didn't assume everyone understands the meaning of Calliope.

Thanks so much! Our brand new whirlpool was making the same noise. I ended up stuffing some plastic electrical wire and jammed it under one of the feet for the same effect. No more loud pitched noise!

Thank you for the nice video, I got this code 18 today, but in the instruction book it says that it is a engine module pin 15, but I could not sence any problem with the engine, I haven't yet checked if it's the bulb which is broken, I check tomorrow.

take a sample of the coolant liquid yourself with a pipette. put it in a little bottle in the freezer. leave it a day; If it freezes solid, add anti-freeze, if it doesn't, you're ok.

This didn't work for mine, but instead I just switched the tire load pressure from eco to high and the light turned off.

Or you can use the old bicycle tire top

Thankyou for sharing now can you please help me how to replace old USB connector with new one

Are you serios? 😂😂😂😂

In my case the key turn and the car starts but my wheel isn’t turning

Hello Again. Are you still have Meriva B? If so, i need your experiences. I tried to use the flat inflator in the car, when I connected the hose i heard air leaking so sound. At that time, I didn't run the inflator. I couldn't find detailed instructions in the manual. Have you some idea about that? If you want we can make a video call. I want to thank you face to face for your help.

what do i do if the hdd stoped showing in the explorer

Ma man👍🏽👍🏽 You saved me from going Destruction mode😅😅😅

Thanks Dude ❤❤💪💪

Very useful video. I also have Code 21 on board computer display and now I know what should I do. Just a hint for next video: get all the tools you might need because it's stupid to make something like this and use house keys! 🙂

Thanks mate.

Where can I get this tool fix the problem heatsink separation no good .Heatsink pipe has on my store but its good or not consider 50 % condition.

Very nice. Well done!

Thank you! It worked! You just saved my day.

Very good. Cheap white thermal paste has an advantage - it doesn't dry up and turn to garbage nearly as easily as high performance CPU paste. It is perhaps not the most ideal choice, but probably fairly close without access to better materials and techniques. I think the most proper way would be to remove the fan and all plastics completely and use bismuth based solder to attach the extra heatpipe, but it's somewhat risky, as the heatpipes can rupture. Indium solder is less risky but it's difficult to purchase and very expensive. A very cheap and durable choice can be to use thermal double sided tape on the bottom instead of white paste and thermal cement (glue) like you have on the top.

Excellent explanation. Can I have the interior lights go on if I don't lock my door? The lights would go on when I opened the door even though the car was unlocked.

Does this work for dell inspiron battery?

As a Lenovo G510 user, I can't tell you how valuable your videos are to me. Thank you so much.

My dear friend you are awesome. I followed your trick and it worked and I am glad at your effort. Hats off!

That trick worked for a HP MU06 pack ;-)

thank you so much man

Hi guys I have opcom 2010 can this software work on my 2010

Please can opcom corsa D ecu pin 2015 model