วีดีโอ

What a joke

My daughter is always my helper. 🥰 Thank you great video.

Excellent video -- thank you! Something that might help DIYers with the rear wheels on these Honda 216s: Each Pinion Gear (12-tooth) has a "punch mark" (small, shallow hole). After cleaning and lubing the gear, note that you install with the punch mark facing inside (for the Left Wheel) and facing outside (for the Right Wheel). This is according to the Honda 216VKA Shop Manual. Take care! -- Old Matt

I might have missed it, but how did yours break? Mine broke on a drive today. Found your video 1st and was extremely helpful

good vid . The best on the net from UK

My snapping pliers are like yours and would not fit.

Hey my g g, had to hit like cause you dropped the ratchet spanner, it made the video real for me!! And thanks heaps was helpful for me too!! Keep up the vids!! Thanks from Oz

good show chap, i plan to attempt tomorrow.

he keeps not staying on subject crazy

Merci 😮wow Québec

Canada québécois Merci 😊love

Do u by any chance get water sweeping in Not inside the car, but like on the sunroof edges?.

Damn brother, before you make your videos, use some damn lotion on those hands! I can't imagine how your elbows look 😂😂😂😂

A nail fell outta sky from legit nowhere and bust a hole in my sunroof… I looked around and no one did sunroof glass replacement near me then I looked for a replacement at Toyota,,, 853 dollars… I found a spare sunroof on eBay for 270.

Excellent video. You helped me replace the moonroof on my 2017 camry

Enjoyed your comment whew, found it. I've been there, done that many times. Thanks for the informative video.

How does a metal drive gear wear working up against plastic understand the wheel replace but not the gear. Also.i would replace with the hr wheels they are rubber not plastic.

Thanks for the vid! Good info.

Well to much grease, will pick up stones and dust

Great video. It was very helpful. Thank you!

Thank you for your video your's was very informative and you showed how everything went off and on and what parts went where thank you great job 👍

My mower was exactly like yours . thank you for the very informative video , I fixed it myself .

👍👍👍

Thank you, you made it look so easy. Liked!

To assist those unaware of the ratcheting sound, the ratcheting mechanism(s) are two of three parts. The spring, the KEY RATCHET 42672-VE2-800 and slot at the end of the axel (where the gear fit/slides over).. The spring sits in the middle of the slot and the key ratchet sits on top of the spring round side in. This is what sounds off the normal ratcheting sound when the rear wheels roll. These two parts will stay in the slot if you lubricate it with the correct thick grease requirement and hold it with your finger while placing the small gear back on the axel. Be sure to clean the axel slot and its parts if you are reusing. If not reusing be sure to clean the slot, lubricate it with grease before placing the spring and key back into place. You must also smear a liberal amount of grease around the gear after placing the lock ring back on it. You may also grease the larger wheel gear. I found that cleaning the plastic 'cap' and placing grease on the center divot helps maintain grease for the life of the lubrication. I just regreased mine after 15 years after servicing it this month. It had dried up but there was still a good amount of grease left on both gears. I was quite surprised. Honda strategically placed grease on the inside center of the cap in premolded divots as well as on the gears to 'seal from leakage over the years. The right grease does not leak from the cap even in a hot summer. It keeps its viscosity. Be sure to note how all parts are removed with cell phone. Clean and WD40 everything while you have it apart specifically the heighth lever mechanisms. A wire brush will clean the rust and dried grass and wd40 will keep it lubed and ready to go with some anti rust affects.

Does anyone else keep stripping pinion gears as if there is too much slop?

Can it be used for commercial?

That was super helpful! My roof has some give to it and is making a clunky sound when I hit bumps. (I blame myself and the drive through car wash’s high powered air dry for applying too much downward pressure on the glass) Do you think it might be a simple unscrewing of those screws, raising it and re-tightening those screws to fix that give?

Man....Great Video!

0:48 …. I was trying to figure out how to remove that …. Thanks 😀

4:27 Thank you

Yea, my back wheels usually always squeak every season. I have to grease them once a year. Annoying lol Honda HRX 217HYA 200cc

Thanks for this. The dealership did not re-install the sunroof properly after they did a repair. Now I have some idea what might be wrong.

Excellent video. Saved my day as I was not aware of the spring loaded ratchet pins in the axle. The video made the job easy. THANK YOU!!!!!

like your attention to detail

I’m having problems with my sunroof on my is 250 I believe it’s off track. Do you think this process would help?

Great video you saved me about $1500.00

Thank You !! I Don't see many African American people doing Repairs.. I'm Native American.. Bless You !! I tried to get my repairs on TH-cam but did not go far.. I repair Lawnmowers.. Good Job !!

Before working on it, I will definitely throw some cleaner/rust etc & clean everything up. After it's dry & clean then throw some lube/grease... Then I can start working on whatever needs to be checked out... Honda mowers are good.... I have 3 of the same model... I usually buy things before they wear out... 2 cases of Honda oil & 55 gallon steel drum with premium fuel for my mowers & other equipment. Life is good.

Definitely needed new wheels.

Great video! Nice tip on using magnetic holder to keep metallic washers in the correct order!

thank you.... getting a replacement seal on Friday now im ready to remove

This is a very clearly stated way to troubleshoot forward gear movement and very easy to understand. Great job.

Great video. I traded a buddy of mine an 18 pack of Bud light for his, yesterday. Runs ok, but needs a service and a drive repair.

Good job... I replaced all 4 wheels on mine but I placed 3 washers on each front tire due to excessive wobble. Im ready to purchase the same mower but a one that has not been used much. These are good mowers.

Quick tip for non magnetic torx. Take a piece of paper or plastic from a bag, put it on the tip of the torx bit then push the torx screw onto the tip. This will allow you to start the screw without it falling. When you are done just pull it out and you are good. This is a trick I do all the time, I’m a do it yourselfer like yourself and an office equipment repair technician. Trust me it works. Good luck.

I can’t tell from the video but is the key put down with top part flat or top part curved. It was blurry. Having same problem on my Honda mower. Had it for 6 years. Just bought the Honda parts. Going to try to fix it. One of the wheels doesnt click and freely rotates

Thank you Sir. You saved my day!

Thanks for posting this video. Same issue my mower is having. Looks to be an easy fix for the most part. BTW, I like how you wrap your wheels too. Those tires wear out way too fast. 🙂 ✌

Thanks ! Got it fixed today.......also shot some anti-seize into the black bushing, and lithium grease. Now the self propelled works and I am now able to pull the lawnmower back without the drive wheels locking up. Thanks again. Total time for fix : 20 min