วีดีโอ

Thanks for the vid!

Same here, THANKS YOU for making this video!!! I have no patience for 'instructions' and a video is dramatically more effective. I hope I can just play & play.....not familiar with getting all into settings mode but I'm sure there's a video for that as well. Kinda want to bump the balls up to 5 instead of OEM 3. Actually, I have a great question for you: the rear legs on both my machines keep the game about 5 inches away from the wall and I'd like to push the games closer to the wall: are there rear legs that can be bought that don't slant backwards OR can I modify my legs (cut & weld)? I'm figuring the game needs a degree of wobble in order to induce some tilt when needed otherwise I'd just remove the legs and perch the game on a stout shelf along the wall, hope that makes sense, thanks

The 60 in 1 is actually more accurate, the pixel bash pitches the sound a bit higher, and it lags occasionally The 60 in 1 is actually better, but in my opinion the BEST is the ArcadeSD which all games are licensed and play at the original speed, and are the correct pitch, the resolution is higher and it also has more games!

Great ty

Johnny Neumonic is back? Awesome.

Just got mine 5 days ago it’s amazing.

arcade fridge amirite

🙋‍♂️ Where in the settings do you find the shaker motor settings?

actually saw this game at a local arcade downtown

With the playfield in, my Tales From The Crypt art blades were easy to put in... My Official STERN art blades for GODZILLA, I played with HELL trying to put them on with the playfield in because the adhesive was so sticky. With GODZILLA I 1) removed the paper backing, 2) cut the paper backing down the middle where the playfield would be in the upright position and cut some tiny pieces off the paper backing at the top of the art blade backing to tack it on AND around the hole where there is a tab on the art blade that has a hole for the bolt that connects the backbox to the cabinet. 3) put the paper backing back onto the art blades 4) Using a rolled up piece of paper the circumference of the hole on the art blade stick it through the art blade and match the hole where the hole for the bolt is on the cabinet.{ perfection 🤓). 5) Tack it down from the tiny pieces you cut from the backing paper and then start pealing from the center where the playfield and work your way to the front getting any air bubbles out along the way. 6) drop the playfield and start pealing from middle to the back getting air bubbles out. 7) put that small circle cut out that goes over the bolt... a lot of people forget to do that. I have the same exact art blade for my DEADPOOL as what is seen in this video....I hope it is as easy like it was for you in this video like it was for my Tales From The Crypt {minus the bolt holes} because it took a few hours to do it my way. It would have been easier to take the playfield out for GODZILLA but I couldnt find the disconnect ... it looked like it was hard wired in.. and I am just one guy and didnt want to lift that heavy playfield and chance breaking something. Gotta go install these DEADPOOL art blades now... wish me luck 😃🧐

Hi

❤️❤️❤️

So pretty it almost makes me cry.

this and Godzilla look like great fun!

🤩🤩🤩🤩🤩🤩🤩👏👏👏👏👏👏

I hope they make one for Joust, Gauntlet and Smash TV similar in quality compared to the junk Arcade1Up versions.

Beautiful machine

Those new 4K simulated pinball machines are nice, but can't hold a candle to the magic of a truly animated pinball machine.

I know they say to place it on the left but wouldn’t centered, in front of the speaker be better?

I would of bought the one that takes money instead how many refrigerators do we need your going to have to turn off your arcade machine anyways the cooler doesn’t stay on if you turn off your game I think it’s time for namco to release a new one this Pac-Man pixel has less then 40 games still doesn’t have every game one of the most important games is jr Pac-Man haven’t seen that game get released on consoles since Atari 2600 also they are ignoring Ms Pac-Man plus Ms pac attack it’s not hard to see what games were released if you have mame 32 on your PC installed they finally gave us Pac-Man plus only if we buy an arcade machine but not on consoles

The first claw machine?

I just got a Jurassic Park Home Pin and there is no speaker at all in the bottom of the cabinet. How do you install one when there is no wiring to begin with?

Why would this be any better than a MAME setup? Besides paying 20x more to get commercial looking graphics.

I Would like to see this from farther back. For over all appeal effect….

Guess why I’m watching this. I did not get instructions with mine.

How do these sound with Stern Spike 2 systems? Will it help the sound on Godzilla Pro?

I like how the screen is sloped just like the original arcade machine was.

Theme sells pinball, good luck with this one

Slapping some blades on my machine in the morning! Thanks for the tutorial

Let’s add mods and charge a ransoms sum

Someone has this listed on Ebay for $37,000 !!!!!! What an absolute train wreck, Elvira Premium has been the most problematic game in my collection.

How many LE's will be made?

wanna see the animations/code/light s

Great tutorial, thank you.

Great video, it would be great if you also did one with the optional tilt capacitor installation.

Massively disappointed that they didn’t add in Jr. Pac-Man, Pac-Land, and the two Pole Position’s, especially since it could’ve rounded up that number to 35 or 36, but oh well. The price is just not worth it either. But other than that, it looks like a nice machine!

Why is there no notch for the wire in the casing?

Interested in this for JJP gnr le, but what about scratching lifting the play field in and out of service mode ? Is there enough clearance on gnr for blades?

That's how the Arcade1UP version of Namco should've been! A ship load of classic Namco games!!

Thanks for the 6 seconds of wondering what was wrong with my sound!

Thank you so much for making this video. The directions in the box weren't very clear. I loved how this video showed every detail and also got right to the point. Once I watched this I was able to pop my shaker motor right in. Well done!

Is it better to do wet method installation??

Can Ms. Pac-Man be set to fast speed?

The one thing that irks me is the fact that games like Pac-Man, Galaga, Dig Dug, etc. on the cabinet have higher pitched sound than it should be by an ALMOST unnoticeable amount... but it's just enough to grab the attention of my OCD. The lamer thing is that games like Rolling Thunder or Splatterhouse *don't have this problem* and yet older games like Pac-Man *do.*

I need this in my man cave was wondering how much amps does it draw with it also being a mini fridge??

What is the difference between the Pacman Pixel Bash Cabaret verses the Pacman Pixel Bash Machine? I do not need a refrigerator. Both have 32 games. Thanks

WOW!!!! Amazing.

is it possible to just buy the jamma board ? I have a jamma cab but would like this board for it

Somebody get me a razor!

Any idea if the joystick is eight way or four-way? Pac-Man is impossible to play properly with an eight way stick.