วีดีโอ

Hello, Are you interested in testing our products? We would like to invite you to test the Cargo Tool Box for your Polaris Ranger XP 1000

Great honest review. Currently running a MT342 w cab & it’s been great, but I may step up in future. If you are close to a good machine shop, get them to possibly extend your bucket around edges. We used to do that to our skid steers blending fertilizer. 6-8” on sides/top.

This was a great comparison between the two. I bought an MT7101 this summer with the partial power shift transmission. I’m glad to see the differences especially in size between the two. Around my property a smaller tractor would be nice but I needed the HP for pulling a large arena groomer for horse events so I went with the MT 7101. The partial power shift was a must for me running the groomer too as you can change gears without clutching. It doesn’t look like the MT5 is much smaller than the MT7. I’ve been very happy with my MT7 so far. I can say the loader is very stout and effortlessly moves 1600 pound round bales and anything else I’ve picked up with it but the tractor is still very nimble and easy to maneuver in tight areas.

Thanks for the great comparison. I’ve commented here before…I’ve got the MT573. So far, I’m happy with my purchase. I think the LS is a great value compared to the competition. Just a few comments, strictly my opinions, fwiw: The MT573 is a big tractor. For what I do (property maintenance, woods work, food plots, brush hogging, etc.) the MT573 is as big and as heavy as I want. I’ve got the R14’s, loaded. I like the way they sit. The traction has given me everything i need. Not happy with the ride (at higher speeds). Lots of bounce. Not sure if that’s the tire or the loading, but not nearly as good a ride as my JD4066R with loaded R4’s. The three standard rear remotes was a big deal for me. One of the deciding factors over the Kioti. The transmission on the MT573 does not leave me wanting anything more. For what I do, I’ve yet to use the creeper. Engine power has been everything I need and more. I agree the loader on the MT573 seems a little light. I had some trouble with mine (thought I had bent it). Actually turned out to be loose mounting bolts. I like the lift capacity that it gives me. I’ve got a CTL and a mini-x, so i’ll never do any digging type work with mine…I’ve got better options. The LED lights would be nice for the cool factor, but in reality I don’t do any night work, so for what little I drive mine at the stock lights have been fine. Maybe just me, but I prefer the white wheels to the gray.

On the fence like them both lol

Do the ac coils pull out in front of the radiator for cleaning?

Thankyou for a very informative video. You all did a fantastic job.

What was the sticker price on the new LS and can you order with different tire combinations thanks for sharing the video

I need a back hoe attachment. Is there one available and if not, why not?

Great video, I really enjoy your channel. With regards to the Kioti and all other brands that have a bunch of the electronics....I wonder what that will be like say 15-20 years down the road. I am somewhat hesitant to buy a tractor with that amount of electronics for all the controls. Maybe I am just being dramatic, but I still question how well it all ages. Keep the videos coming !!

Thank you for facts

I looked hard at the Kioti RX7320 before buying my MT573. It is a great tractor, no doubt but the LS just seemed to have more value for the $$$. I’ve been happy with mine so far. So far, only some loose loader mount bolts.

If you had to decide between this or the MT573, which one would you get? I’m looking at both right now and trying to decide which one I want. The Kioti is $2500 more once I add the 2 extra remotes.

5080 over any other tractor

Also 4 wheel brakes

Definitely, buy it got 1 and love it

Hope you heal up quick pal! That box was definitely an upgrade!

I just hit 400 hours on my MT357HC using it for my sawmill operation, logging, etc. It's been a fantastic machine so far! When I first got it, you probably don't remember but I commented on one of your first videos, because I felt like the loader was flexing quite a bit compared to my previous tractor. Now that I have used and abused the loader, I found that the loader is PLENTY strong. I have had a couple small mishaps with logs that really put some torque on it, and no problems at all, it has stayed straight and true. Love this tractor!

Without a cab you be running for your life till ya get home, get to a creek or actually out run them. Been there

They have power shuttle in this model now.

LS does not support their customers after you purchase them. Hard to get parts.

G'day mate I nearly bought a 60hp deutz nice tractors

LG Corporation makes LS Tractors ? I have become Familiar with LG Refridgerators After welding in more than 1,000 LG compressors and Evaporators. Now what do yo you make of that Record ?

Are we waiting for a Tiger?

Un bel same verde😂😂

Question how often does your MT574 Regenerate? Mine did at 12 hours and. Again at 32 hours. I use MFS Red Diesel fuel it's supposed to be great all the farmers around me use it. Thanks

The tranny would be the deal killer for me. Too slow for loader work changing direction .

I think I would go with the LS mt774 over this duetz for a number of reasons. I will say this is a pretty nice tractor in a more reasonable price range like the LS I have the mt573 with 2000 hours on it. Planning to pick up the mt774 in a couple of months. The nice thing about having two similar tractors that shift and operate the same is muscle memory. Jump from one to the next and nothing much changes in feel.

Hey I enjoyed your video. And as a viewer I would like to share what I have heard about the brand of tractor your looking at. I have heard that the Dutz is one of the most difficult tractors to sevice of all of the makes of tractors on the market. Now, this is just what I have heard, and I have no experience at all with this brand, so I dont know. This could be completly wrong, but I did want to make you aware that this could be a potential issue. And I am in no way trying to influence your decision but I did want to make you aware of a possible issue.

Wish ls 573 at Stapleton Nebraska

The local tractor dealer here is a John Deere, the only problem is they have a 3.8 star rating and people are complaining the no matter how small the repair, everything is 8 weeks out and poor attitudes form the service department! Looks like I will have to go another 30 miles out to find a decent dealer for a color other than green. Love your video and points about your LS tractor and down falls of the Deere. It almost seems that J Deere is giving up on the smaller tractors and just decided to 'farm' it out to India.

Everyone like to justify their purchase decisions. All good. The cost difference between the two with a cab and loader is about 20%. You pay 20% more for a John Deere. But keep in mind, you pay interest on LS tractors in most dealers at 5% year. So its all the same. Yes, they are made in India and assembled in America. But that doesn't mean quality takes a hit. If India builds the parts according to JD specs, no problem. Why pay someone in America $60/hr to build parts when you can pay them $20/hr in India? Also, LS is made in China, Brazil, etc. So its all the same. They are both fine tractors. You can't go wrong either way.

Nice, video. Are they keeping the Creeper Gears on the new MT774 & MT7101?

If you need ls parts and have a part number from ls. Put and Mt in front of the number and order them from newholland

Nice tractors but getting parts is an issue.

Diamond R Equipment in Freeburg Missoura has Phenomenal customer service from sales to parts and Service department everyone pretty much knows well Everything they sell. I couldn't find the Torque specs for the Loader Bolts in the MT573 manual and they Immediately told me. When they installed the 3rd function for the Grapple bucket on 1 of the fitting Teflon tape wasn't used and it leaked about ½ gallon before I noticed it called them and they were going to bring me a gallon and they are 35 minutes away .That's Service but I told them know because I had to go by the place the next day. They gave me the 2.5 gallon jug instead of the gallon one because the service manager said by having the 3rd function installed that I needed about a gallon more than the 14.5 gallons recommended. I went into 3 different John Deere dealerships before buying the LS and it was like I didn't exist I showed them my property on my X on hunting app and told them my intentions for the property and what size tractor did they recommended 1st thing outta there mouth was Money ( I'm not wealthy by any stretch of the imagination but I set my budget for max 75k for everything I wanted) I actually just wanted a 40hp but All my big Farming neighbors knew what my plans were and told me that I need no less than 65 hp and they were correct with the money I saved I'm thinking about getting a small 25 to 30 hp open cab LS just to tinker close to the house. I showed Chuck the salesman at Diamond R my property and his 1st words was 70 hp minimum not How much money you got I told him every attachment I wanted and I was gonna buy a Tractor somewhere that day they received full payment immediately. The only other dealership that actually knows and wants your business is Lauf equipment in Jefferson City Missoura and they are a Massey Ferguson Dealer.

I would Highly recommend Multiseal for your tires it's a Remarkable product I had balist put in the rear tires around 600 to 650 pounds per tire and it takes 5 gallons of the Hydro 1500 per rear tire and a half gallon of HD2500 per front tire. The Hydro 1500 mixes with any Ballist from Beat sugar to Alcohol and it'll self plug up to ¾ in punctures ( my neighbor Swears by it it plugged a 2½ inch Cedar stob hole and tire pressure has never Dropped) my wife and I bought a 84 acre Farm about 50/50 Virgin Woods and Pasture and we have Black Locust Trees Everywhere and Tire repair or replacement Isn't Cheap. The wife gave me permission to buy any Brand that I wanted and I chose LS MT573 because of Value I could have easily bought Green or Orange but I got a 84 inch Iron horse Rotary tiller, 84 inch iron horse box blade and Extreme duty Stump Buster Bucket a LS Grapple bucket and 3rd function and a Extended warranty that covers Bumper to bumper for the Full 6 years unlimited hours and still cost 11k less than a JD 5075E tractor only and nearly 20k on Kubota M4- 071. Value is value and in today's economy you gotta be thinking ahead. Your 50 hrs maintenance video will come in handy shortly I've only got maybe 23 hours on it but I bought a Chain wrench because of the nightmare you had with the Hydraulic filter😂 I went ahead and purchased a Red Dog VacTrac to keep from losing Hydraulic oil during filter changes. Thank you for your videos and the quality of them. I've been curious how long it's gonna take for your rear glass to come in. The MT573 is All the Tractor I need for what we are doing.. Stay safe especially working on the tractor my old dirt bike riding buddy crushed himself to death the day after I purchased mine and his was a sub compact tractor.

Looking forward to your honest review of your tractor. Please tell us the hours you have on your unit at the time of the review. Mine is the MT340 cab tractor 100 hours, no issues to date.

You done a lot with that tractor, am pushing 430 or something like on my LS. Been a great tractor. I did ask my dealer if there was a way to unhook my hour meter because am using this tractor to much 😂

It's not totally gone. But it is hard to find.

I'm hearing that LS has a major problem with their parts warehouse in the U S . I don't know if your having an issue getting your back glass for your tractor or not. Could you give us an update on when the dealer said you might get the part in your hand ? And on your video about customer service, any place in particular you would care to name, or just a general concern overall ? Have a good one.

I know exactly how you feel with the John Deere dealership in Seguin Texas. I called them to speak with parts to purchase a pallet of net wrap and wanted to find out if they had it in stock. I was on hold for 30 minutes and still no answer. So instead of hanging up, I drove to John Deere while still on hold all the way there. I walked in the store still on hold, and looked at the people behind the counter doing nothing. And on top of that, they didn’t have the net I needed. I still had to go to Shiner to Shoppa’s John Deere and pick up my net wrap. I will say I’ve done a lot of business with Shoppa’s and their customer service has been great. I will also give a shout out to Dietz Tractor. Have purchased multiple pieces of equipment as well as three brand new tractors from them. We had a major issue with one of our tractors and they worked with us until that problem was resolved.

Thanks for posting this video. I know it was a year ago but I am looking at buying one of these today for our farm and youtube channel. Great overview.

1 of my neighbors buys only 1000pto because his family ruins his 540 implements

You gotta do what you can. You don't have to Impress anyone, that becomes expensive and it's kinda Retarded. I just purchased a 2024 LS MT573 it's my 1st Tractor and I got all the Implements that I wanted minus a brush hog I wasn't paying 16.5k for a 12ft batwing so I waited and found a Bush Hog 3210 for 5k excellent condition,it's not shiny Red but it's All Red and No Rust.I thoroughly enjoy your videos and your 50 hour service video will come in handy shortly.

Dang it thinking I’ll have to watch again! To many whiskey 🥃 with the wife tonight

im sorry for your glass .but i can tell you you will find glass in there from now own

Great work as always on big blue! 💙

I agree on the loader. Obviously the lifting capacity is strong, but structurally I feel the design is weak. I feel they probably lightened the loader to increase lifting capacity, if that makes sense. When we are looking at specifications in a brochure, we are just comparing numbers, and numbers sell tractors. I actually recently tweaked my loader moving a downed tree on one of my trails…operator error no doubt, but in hindsight it tweaked pretty easily compared to my other tractors. Measuring pivot pins at SSQA, it was off 1.5” side to side. Quite alarming, but equally alarming was how easily I was able to tweak it back to normal. A few timbers under the low side of the bucket and some careful work with the joystick and I got back to within less than 1/8” side to side. Lesson learned, I’m going to be extremely careful with any off balance work with the loader.

Did it just fall out?