The Clever Craftsman
The Clever Craftsman
  • 73
  • 166 036
Riding vintage snowmobiles!
Ride along as we make some laps on our vintage sleds! First snow for 23/24 winter in Ohio. Playing around with Yamaha Exciters, Enticers, and Phazers. #yamaha #exciter #440 #enticer #340 #phazer #snowmobile #vintage #sleds
มุมมอง: 2 553

วีดีโอ

Ride along with my RC Boat CRASH!
มุมมอง 586ปีที่แล้ว
During our NASBOAT race of homemade RC boats my boat made contact with another racer and then blew over backwards, doing a backflip with the GoPro on board. Lots of hard fun racing captured in this video, check it out! #NASBOAT
Testing and Tuning before the BIG race!
มุมมอง 1.3Kปีที่แล้ว
Brody and I took our homemade RC boats out on the pond and did a little testing and tuning before NASBOAT race number 2 of the 2023 season. Ride along with some cool GoPro footage! To learn more visit www.nasboat.com or find our group on FaceBook @NASBOAT
Homemade RC boat racing NASBOAT
มุมมอง 914ปีที่แล้ว
We just finished the first NASBOAT race of 2023 and are soon having race number 2 of the season. In these events competitors build their own rc boat using a sting trimmer engine and compete for wins against some fierce competition! We are located in Ohio, but if you want to start a league in your area reach out and we will help you!
NASBOAT rules and updates for season opener!
มุมมอง 590ปีที่แล้ว
Nasboats first race of the season here in Ohio gets underway this Sunday. Aaron highlights some of the rules and race procedures for 2023. Look forward to seeing you all Sunday! Track opens at 5 racing starts at 6.
NASBOAT- Test running some homemade boats
มุมมอง 1.6Kปีที่แล้ว
These are some older videos I had of test running boats in 2022 on our pond. Check out the enginuity these young men have in making boats from scratch using weed eater engines! You can learn more about NASBOAT by subscribing to my channel, following NASBOAT on facebook, or visiting nasboatracing.com
NASBOAT racing update… we are going to Talladega! And we have a scoreboard!
มุมมอง 137ปีที่แล้ว
The 2023 NASBOAT racing season starts soon for us here in West Central Ohio! May 7th is the season kickoff! Big announcement made here our second race on June 12th is going to be at a 19 acre pond! And we have an exciting new scoreboard to count laps! #nasboat #rcboat #boatracing #stringtrimmer #impba
Prepping RC boats for 2023 racing season!
มุมมอง 498ปีที่แล้ว
Nasboat, the National Association of String Trimmer Boat racing will be kicking off the 2023 racing season very soon on May the 7th at Overholser’s Pond here in Bradford Ohio. We build homemade RC boats and race them head to head in fun friendly competition! There are two rules: 1. Boat must be flat bottom (simple, homemade) 2. Must have once been a string trimmer engine. (Dont go buy a racing ...
Homemade RC boat with 3D printed parts! NASBOAT racing!
มุมมอง 608ปีที่แล้ว
In this video Austin is test running one of his homemade RC Boats for 2023 NASBOAT racing. Austin 3d prints engine mounts, strut supports, servo mounts, and lots of other brackets etc for his boats. You can learn more about what we do with NASBOAT by visiting www.nasboatracing.com or find our group on Facebook by searching for NASBOAT. You can build your own homemade RC boat with a weed-eater e...
Test running some NASBOAT setups! Homemade RC boats!
มุมมอง 2Kปีที่แล้ว
We have a lot of new Rc boats built with string trimmer engines for this years NASBOAT racing competition. Every new boat needs some fine tuning and the drivers need some practice! #nasboat #boat #rcboat #boatracing #rc
How to make a winning Pinewood Derby car!
มุมมอง 241ปีที่แล้ว
How to make a winning Pinewood Derby car!
Building wooden RC boats for NASBOAT racing -Part 2!
มุมมอง 1.8Kปีที่แล้ว
Building wooden RC boats for NASBOAT racing -Part 2!
Chevy SS Exhaust Mods
มุมมอง 263ปีที่แล้ว
Chevy SS Exhaust Mods
Building RC boats for NASBOAT 2023 -Part 1
มุมมอง 931ปีที่แล้ว
Building RC boats for NASBOAT 2023 -Part 1
Mario Kart Valentine Box!
มุมมอง 1.4Kปีที่แล้ว
Mario Kart Valentine Box!
Cold starting my Turbo Rx7 -Aggressive Street Port Lope!
มุมมอง 2.3Kปีที่แล้ว
Cold starting my Turbo Rx7 -Aggressive Street Port Lope!
Rainbow RC Boat Story...Retiring our NASBOAT hull and making it a shelf!
มุมมอง 489ปีที่แล้ว
Rainbow RC Boat Story...Retiring our NASBOAT hull and making it a shelf!
How to make your own RC boat from scratch! NASBOAT design overview
มุมมอง 8Kปีที่แล้ว
How to make your own RC boat from scratch! NASBOAT design overview
6 year old restores his Dad’s old bike! Vintage bicycle restoration
มุมมอง 239ปีที่แล้ว
6 year old restores his Dad’s old bike! Vintage bicycle restoration
My Rotary Motorcycle RUNS!!! Shoots flames out the exhaust!
มุมมอง 502ปีที่แล้ว
My Rotary Motorcycle RUNS!!! Shoots flames out the exhaust!
Homemade RC boats with weed eater engines, NASBOAT!!
มุมมอง 12K2 ปีที่แล้ว
Homemade RC boats with weed eater engines, NASBOAT!!
Fun RC boat racing with Weed Eaters! NASBOAT!
มุมมอง 13K2 ปีที่แล้ว
Fun RC boat racing with Weed Eaters! NASBOAT!
Suzuki TS185 LED and wiring update
มุมมอง 2.7K2 ปีที่แล้ว
Suzuki TS185 LED and wiring update
Train hits semi trailer Versailles Ohio
มุมมอง 2.7K2 ปีที่แล้ว
Train hits semi trailer Versailles Ohio
Custom intake manifold for Rotary Motorcycle. Suzuki Re5 ~Ep. #7~
มุมมอง 9622 ปีที่แล้ว
Custom intake manifold for Rotary Motorcycle. Suzuki Re5 ~Ep. #7~
Snow Blower on a White Tractor
มุมมอง 2.3K2 ปีที่แล้ว
Snow Blower on a White Tractor
My Rotary motorcycle has compression! -Ep. #6- Suzuki Re5
มุมมอง 3692 ปีที่แล้ว
My Rotary motorcycle has compression! -Ep. #6- Suzuki Re5
Rotary compression test… adapting…Suzuki Re5 -Ep. #5-
มุมมอง 5352 ปีที่แล้ว
Rotary compression test… adapting…Suzuki Re5 -Ep. #5-
Rotary parts are arriving! Suzuki Re5 -Ep. #4-
มุมมอง 4992 ปีที่แล้ว
Rotary parts are arriving! Suzuki Re5 -Ep. #4-
Toss the carb, will this Rotary ever run? Suzuki Re5 -Ep. #3-
มุมมอง 1.3K3 ปีที่แล้ว
Toss the carb, will this Rotary ever run? Suzuki Re5 -Ep. #3-

ความคิดเห็น

  • @juliendaoust6391
    @juliendaoust6391 10 วันที่ผ่านมา

    Have you since be able to complete your built? Update please. It is so nice!

    • @theclevercraftsman
      @theclevercraftsman 10 วันที่ผ่านมา

      @@juliendaoust6391 I had a busy past year, but am back on this project now! Frame is currently at the sandblaster, will post an update video soon

    • @juliendaoust6391
      @juliendaoust6391 10 วันที่ผ่านมา

      @@theclevercraftsman awesome! Can’t wait. I still working on my RE5 to.

    • @theclevercraftsman
      @theclevercraftsman 10 วันที่ผ่านมา

      @@juliendaoust6391 what all are you doing

  • @tp2315
    @tp2315 12 วันที่ผ่านมา

    Butchering a valuable classic. What a shame.

  • @tp2315
    @tp2315 12 วันที่ผ่านมา

    You know it’s oil injected like a GT right?!Priming with carb cleaner will roast apex seals in a hurry.

    • @theclevercraftsman
      @theclevercraftsman 10 วันที่ผ่านมา

      @@tp2315 yes they are, but when not using stock carb it seems easier to premix. You seem very knowledgeable about Re5’s, any downsides to premixing?

  • @tp2315
    @tp2315 12 วันที่ผ่านมา

    Why? The original carb is easy to work on with home made angle indicator etc. original carb is essentially 1/2 a vacuum secondary Quadrajet. The induction is not simple with small primary and large secondary, plus peripheral throttle at the intake port. It may run, but not well.

  • @batteryacid9435
    @batteryacid9435 หลายเดือนก่อน

    what headers?

  • @captdru-s6z
    @captdru-s6z 2 หลายเดือนก่อน

    Great job and thank you for sharing! My older brother had this same exact bike in 1976. I drove the 125 version back then . What amazing memories and times. You’re a wonderful son to your Dad.

  • @davemackey3539
    @davemackey3539 2 หลายเดือนก่อน

    th-cam.com/video/JWdQHNNX_Xc/w-d-xo.htmlsi=_vEdTqJ650h9Kw93 Looks like a smaller version of what we've veen racing! Very cool. Enjoy and have fun!

  • @O.KFarmToysdeutzallis6275
    @O.KFarmToysdeutzallis6275 3 หลายเดือนก่อน

    Can you do a in depth video on this tractor and the restoration process. I would like to restore our 1979 jd 2240 take the loader off and put weights on the front. Just gotta learn how to weld cast

  • @tylerdeyoung985
    @tylerdeyoung985 4 หลายเดือนก่อน

    Has anyone ever done this for a 2002 Malibu 23 xti?

  • @bluekats777
    @bluekats777 4 หลายเดือนก่อน

    Seconds of fun … 🥱

  • @ManiacRacing
    @ManiacRacing 4 หลายเดือนก่อน

    I'm hoping to pick up a 1971 TS185 this coming monday and I came here looking for info on how the Vape system works. It's very expensive! Especially shipped to the USA. Mine is missing all the lights so it looks like converting to 12v like yours might be the best option considering how hard finding original parts will be.

    • @theclevercraftsman
      @theclevercraftsman 4 หลายเดือนก่อน

      The Vape system is expensive, but shipping to the US is not an issue. Just look for a supplier that is local. I got mine from a retailer from Ohio selling new ones on ebay and it shipped out to me the next day!

  • @Thom-d7r
    @Thom-d7r 5 หลายเดือนก่อน

    Love the simple boat design. What would happen if you didn't put the keel fin on the bottom? Would it perform like an airboat?

    • @theclevercraftsman
      @theclevercraftsman 5 หลายเดือนก่อน

      Without the keel they really slide around and dont turn a very tight circle

    • @Thom-d7r
      @Thom-d7r 5 หลายเดือนก่อน

      Thank you.

  • @Thom-d7r
    @Thom-d7r 5 หลายเดือนก่อน

    I have really enjoyed watching your videos. Reminds me of stock car racing with boats. Live way too far away to see you guys. I do belong to 2 boat clubs already. Lol

    • @theclevercraftsman
      @theclevercraftsman 5 หลายเดือนก่อน

      We are the nascar of rc boating 😂

  • @airbow59
    @airbow59 6 หลายเดือนก่อน

    What kind of motor is this please? And how many CC? How wider you build your boat how slower he is.

    • @theclevercraftsman
      @theclevercraftsman 5 หลายเดือนก่อน

      The rainbow boat is a 21cc echo weed eater Boat is about 14” wide, runs about 25

    • @airbow59
      @airbow59 5 หลายเดือนก่อน

      @@theclevercraftsman What size off prop do you use on this motor?

  • @bobush9986
    @bobush9986 6 หลายเดือนก่อน

    Thank you for the trip down memory lane.

  • @acuraintegra101
    @acuraintegra101 6 หลายเดือนก่อน

    I have a 1975 one of these with the hideaway cluster but she needs so help she's not been on the road since 1996 I'm more than likely going to go the same route as you because with premixing because Ive not had good results with my past rx7s and RX8 and for a almost 50 year old bike I think premixed is the right thing to do. I'm going to keep my cluster and a the signal but the rest is getting modified parts are to hard to come by at a good price even if I can find anything for it the chrome is shot on this bike on the metal and plastic please put up more videos about this bike my rotary brother.

  • @oscarroberto7926
    @oscarroberto7926 6 หลายเดือนก่อน

    Hi more info ..how to buil one same you boat...😊

    • @theclevercraftsman
      @theclevercraftsman 6 หลายเดือนก่อน

      Check out the other videos on the channel

  • @gusbuster8068
    @gusbuster8068 7 หลายเดือนก่อน

    What brand is the new magneto ignition? I have a 1974 Tc 185 that needs upgraded. Thanks

  • @OxybroCone
    @OxybroCone 7 หลายเดือนก่อน

    Are these throttle restricted? Great to see kids getting into this. Circle racing looks like a lot of fun just need more rpm

  • @jimmarshall807
    @jimmarshall807 7 หลายเดือนก่อน

    Amazing! I had a '75 back in the day, and have had a '78 for 12 years now, super-fun bikes.

  • @bob2161
    @bob2161 8 หลายเดือนก่อน

    As usual, I seem to be a little late to the party. I hope that you're still monitoring your channel. I have thought of building such a boat for a while now. However, all I really know about boats, is that the boat goes on the water, but it's very bad if the water goes in the boat. You mentioned the requirements of the boats. Are there no dimensional or material specifications? You mentioned coming out to watch the racing, but you didn't say where it was happening. One of the reasons I've not followed up with building one for myself is that I have no knowledge of what "Boat Hardware" I would need, or where to get it. I can tell that you are in the US, but where? Also, what kind of speeds are these boats reaching while racing?

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      Rules to race with us are simple, flat bottom boat with a string trimmer engine. Dimensions and materials are all up to you. We race in the area around Greenville Ohio, if you are nearby you are welcome to join.

    • @bob2161
      @bob2161 8 หลายเดือนก่อน

      Thank you for the response. Is there a website for NASBOAT?

    • @bob2161
      @bob2161 8 หลายเดือนก่อน

      I sent that before I meant to. Looking at the map, you're just a little more then 200 miles from where I live. I've now watched some more if your videos and have learned quite a bit. Are you making your transoms from 1x4? The rest of the material appears to be what is called "Luan" in my area. I've also seen it referred to as door skin. It is low-grade plywood that is about ³/¹⁶". I say low-grade because there are plenty of voids in the inner ply. Thanks again for responding, and for the videos you've posted. Ciao

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      @@bob2161 I normally use hardwood for the sides and transom, that is planed down to maybe 1/4” or 5/16” on the sides and 3/8” for the transom. Then yes the bottom and hood luan works fine. We do have a website it is www.nasboatracing.com

    • @bob2161
      @bob2161 8 หลายเดือนก่อน

      @@theclevercraftsman that's great! Thanks for the info. If I'm looking at this right the transom needs to be beefy enough to hold the screws for the rudder mount and shaft strut. I imagine pine would bee too soft. I do have a few planks of oak I think I'll try. Thanks again.

  • @_turist_2750
    @_turist_2750 8 หลายเดือนก่อน

    Здравствуйте модете поделиться вашеми чертежами заранее спасибо 🙏

  • @tekblood6557
    @tekblood6557 8 หลายเดือนก่อน

    Is the engine a loss when you flip?

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      Oh no, pull the spark plug, pull it through a few times, new plug and good to go. I have flipped it multiple times per evening race session

    • @tekblood6557
      @tekblood6557 8 หลายเดือนก่อน

      @@theclevercraftsman Wow, fantastic. I think I found my sons next project. Perhaps we will race in the next year or two. These are fantastic!!

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      @@tekblood6557 cool! Where are you located

    • @tekblood6557
      @tekblood6557 8 หลายเดือนก่อน

      @@theclevercraftsman I am located in central Ohio.

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      @@tekblood6557 thats great! We are Greenville

  • @acuraintegra101
    @acuraintegra101 8 หลายเดือนก่อน

    Help! You dont have another old plug do you. i bought one of these bikes and came with no plug just a oilly old rag in the hole i dont like it and i need it to make a adapter for a plug i any help would be much appreciated.

  • @TheWhippetmaster
    @TheWhippetmaster 8 หลายเดือนก่อน

    Where did you get those parts? I am having a hard time finding an overseas supplier. Thanks

  • @eduardsfarmgaming6092
    @eduardsfarmgaming6092 8 หลายเดือนก่อน

    Hi i wanted to ask how do you mount the engines on the nasboats without drilling holes in the boat and making it leak

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      Usually we glue in wood blocks and bolt to those. I try to do rails spaced 5” because that is standard in the rc boat industry

    • @eduardsfarmgaming6092
      @eduardsfarmgaming6092 8 หลายเดือนก่อน

      ​@@theclevercraftsman thanks alot

    • @eduardsfarmgaming6092
      @eduardsfarmgaming6092 8 หลายเดือนก่อน

      ​@@theclevercraftsmanif I use woodblocks would the glue hold because of all the vibration of the engine

    • @theclevercraftsman
      @theclevercraftsman 8 หลายเดือนก่อน

      @@eduardsfarmgaming6092 Gorilla glue or modeling epoxy they will

    • @eduardsfarmgaming6092
      @eduardsfarmgaming6092 8 หลายเดือนก่อน

      @@theclevercraftsman 👍🏻

  • @johnpaulharmon
    @johnpaulharmon 9 หลายเดือนก่อน

    What a great son. And a great bike.

  • @shannonoshea644
    @shannonoshea644 9 หลายเดือนก่อน

    I just watched some vids and loving them it actually moves pretty darn good ! Even compared to a much more complicated rc brush less set up we usually run

    • @theclevercraftsman
      @theclevercraftsman 9 หลายเดือนก่อน

      Yeah the Milwaukee string trimmer works surprisingly well, about the same speed as a 21-25cc string strimmer

    • @justinkinzie9991
      @justinkinzie9991 4 หลายเดือนก่อน

      @@theclevercraftsmancan you send me any details on how you made the motor work? I am building one like this currently!

  • @shannonoshea644
    @shannonoshea644 9 หลายเดือนก่อน

    Literally just found the channel, been running and building traditional rc race boats for years and I love the idea of these nasboats ! Be interesting to put one together with a stock zenoah 26 and some trim tabs haha.I usually run flyskys just with a digital screen love them

    • @theclevercraftsman
      @theclevercraftsman 9 หลายเดือนก่อน

      Yeah I have some zenoahs, I should put one in there and see. My boat from this last year was a Stihl FS250 and those motors really fly for string trimmers! NASBOAT has been a ton of fun!

    • @shannonoshea644
      @shannonoshea644 7 หลายเดือนก่อน

      Sorry for the late reply it would fly with a stock 26 Zen! And that they do very good string trimmer engines try stihl hp ultra at 32:1 what my race engine builder uses as most of us do . And a good prop from bonzi sports. It really looks like so much fun ! Maybe I can build one and create a new class to get into

  • @markfeasel9431
    @markfeasel9431 9 หลายเดือนก่อน

    Looking for a 440 exciter or @ enticer 300-340

    • @theclevercraftsman
      @theclevercraftsman 9 หลายเดือนก่อน

      Where you located?

    • @markfeasel9431
      @markfeasel9431 9 หลายเดือนก่อน

      @@theclevercraftsman western ny

    • @theclevercraftsman
      @theclevercraftsman 9 หลายเดือนก่อน

      @@markfeasel9431 there is a facebook page just for Yamaha Exciters that has them from time to time. I actually would consider selling one of mine if you ever get near Ohio, we are West side of Ohio near state line

  • @mazdanofficial
    @mazdanofficial 9 หลายเดือนก่อน

    What are your AFRs at idle?

  • @christophemaxilari7678
    @christophemaxilari7678 10 หลายเดือนก่อน

    Very nice. What a beauty. I will buy the same orange one in a few days. Bravo, Christophe from France 😍

  • @mazdaman85rx7
    @mazdaman85rx7 10 หลายเดือนก่อน

    Any updates on the bike?

  • @andystrains4335
    @andystrains4335 10 หลายเดือนก่อน

    Love old exciters I had the 81 and my brother had the 78 although they were essentially the same model they were both different running sleds

    • @theclevercraftsman
      @theclevercraftsman 10 หลายเดือนก่อน

      It is funny how much different units run. I have found clutching and how fresh the top end is makes a big difference

  • @acuraintegra101
    @acuraintegra101 10 หลายเดือนก่อน

    Hey just found your channel i just bought a 75 blue one and there's no spark plug do u have a old spark plugs or know where i can get one thanks for any help.

    • @theclevercraftsman
      @theclevercraftsman 10 หลายเดือนก่อน

      I bought an adapter to convert them to a modern street bike plug

    • @acuraintegra101
      @acuraintegra101 10 หลายเดือนก่อน

      @@theclevercraftsman thanks I can't find anyone anywhere selling them anymore I'll have to figure something out I can't let her sit like she is it's breaking my heart that people don't make anything for this bike anymore it's a shame they were not excepted better in the 70s if u see one somewhere could you send me a link any help would be greatly appreciated 😎

    • @theclevercraftsman
      @theclevercraftsman 10 หลายเดือนก่อน

      @@acuraintegra101 join the “Suzuki Re5 Owners Club” on FaceBook. A guy named Stuart Knox made them and would list them on ebay at the following link. They are currently not listed but I bet he could get them for you. www.ebay.co.uk/itm/Suzuki-RE5-stainless-steel-spark-plug-adaptor/195487288230?pageci=2b113f05-80bf-4cef-8934-d1344c4b155d&redirect=mobile

  • @geezerjr.6559
    @geezerjr.6559 10 หลายเดือนก่อน

    thanks - brings back great memories

  • @TheGryf0xxx
    @TheGryf0xxx 10 หลายเดือนก่อน

    It's white, like a FC should be.

  • @BentTrails28
    @BentTrails28 10 หลายเดือนก่อน

    Those are some of the best sleds that were made. Enticer and exciter.

  • @joesnowmobiles
    @joesnowmobiles 10 หลายเดือนก่อน

    Nice! My first sled was a 1977 Yamaha Exciter 340 super rare machine. The 440 is an awesome machine also!

  • @Foozer1337
    @Foozer1337 11 หลายเดือนก่อน

    Do you have any close up explanation videos?

  • @larryyoung1608
    @larryyoung1608 11 หลายเดือนก่อน

    I live in Nevada, near Reno. Do you have any races on the west coast?

  • @andrewerickson6690
    @andrewerickson6690 11 หลายเดือนก่อน

    Love it

  • @andrewerickson6690
    @andrewerickson6690 11 หลายเดือนก่อน

    ❤❤❤❤

  • @bermyvlogger
    @bermyvlogger ปีที่แล้ว

    great .i had idea like this many years ago for the locals but it didnt catch on

    • @theclevercraftsman
      @theclevercraftsman ปีที่แล้ว

      Its been popular with the young men the last few years

  • @howardmichael73
    @howardmichael73 ปีที่แล้ว

    I'm building a nasboat about 36"×12" in diameter,I'm running a 2200kv castle motor and esc. What size propeller do I need to run on a boat this size to get good results 🤔? Thanks!

    • @theclevercraftsman
      @theclevercraftsman ปีที่แล้ว

      For what we do with a string trimmer a Prather 270 for example works perfect. I dont have any electric experience.

  • @markjeep9415
    @markjeep9415 ปีที่แล้ว

    Looks great fun

  • @1여행스케치
    @1여행스케치 ปีที่แล้ว

    이 사람들 모두 수제알씨보트 인건가? 기성품 같지않네 투박하지만 진정한 마니아 들인것 같다

  • @untoldradionetwork
    @untoldradionetwork ปีที่แล้ว

    I am restoring a 73 TS250 also and would love to see a video or get info on what wires you tapped into to get your new turn signals to work, Since the TS series bikes will continued to be restored and you are a wiring genius! I would love to see a tutorial on how you did it. Beautiful bike and work sir.

  • @joseheredia898
    @joseheredia898 ปีที่แล้ว

    I have the same engine i will like to know if u have a wiring diagram to make running i have a complete bike but a lot is missing i want to install the engine in a scooter

    • @theclevercraftsman
      @theclevercraftsman ปีที่แล้ว

      re5rotary.proboards.com/thread/379/re5-parts-service-manuals-online

  • @manlioalvarez4393
    @manlioalvarez4393 ปีที่แล้ว

    Hello dear friend, I want to ask you why you put the water hose on the exhaust and not on the engine? What is the function? I would greatly appreciate your response.