วีดีโอ

Still a lot easier to just drop the clutch. Gives you a lot more slack in the belt to get it done. Dropping the clutch is just the one bolt. Easy peasy!

Have the CLK1 model, and this video instruction worked! Also, program ID "2" is helpful whereas other video or reference has green as "4". Thank you

What is the part# on that belt

Thank you. It saved me about $300.

Great video!

You saved me today! Thanks!

just got an old 265 and of course the belt is toast. this is going to save me time, thanks.

Thank you Jason!! I looked at videos for hours, nothing worked. I came across your video, KABOOM, just like that, had it working in about 3 minutes!! YOU DA MAN!!

THANK YOU!!!!!

Perfect instructions. The last 3 idiots I watched didn’t get you past the default 1234. Thx much!!!

Jason T for the win!!! I had the same thing happen, I was curious that all the other ones I saw were flashing orange/red behind the numbers but these older models are YELLOW backlights. Good way to tell without having to unscrew it. Your instructions worked perfectly. Thanks so much.

Great video! Thank you!

Saved me the money too man. Appreciate this video after about 1.5 hours of trying to reprogram.

Five years later your a life saver! Thank you

Thank you thank you thank you This is the only video you need!

Jason you are the man! Thanks for the great video...I was right where you were. Good job and thanks for taking the time to make this vid!

what size belt does it take? I can't find the right size

Thanks. I have to do this in my father in laws.

Omg...thank u soooo much. I was struggling. It was 3..not 2 for here.

Thank you! this also works for the Clicker model CLK1. Without the "D" designation

Thanks. Inherited a house from my father and have been having so much trouble with this

Thank You! It works again! 😁

You are the god damn man

I need help adjusting my deck height, please. The knob between to loose to adjust. I hope I did not break it. How do I adjust it

Thanks for posting this valuable info 👍🏼Even their website doesn’t provide this info 🤦🏻

What size belt did you use for the john deere 265

very informative, but it would be a really good video if you had better lighting, just putting it out there. thanks.

I tried this method and it almost worked. My problem is that the belt got stuck between the fan and the pulley. I had to take of the riders platform, gas tank, and fan to get the belt over the back pulley (not a big deal…just an extra 9 bolts). If your belt is still on, I would recommend taking a video of how it is all routed because it’s not exactly self explanatory for a newbie.)

ALERT! Despite my having a red/orange button on my Chamberlain Liftmaster Professional Formula I (which would indicate a "3" code for programming) and despite literally hours of trial and error, I finally found that the "10" code was what worked. I can't explain it, but it worked, FYI.

Thank you Sir , A great how to video ....I also was ready to purchase a new Keypad !! Previous owner said she could not get it to work ! Your info was spot on !!

Yeah im gonna stick to laying brick lol. Im not mechanically inclined at all 😓

What size belt do i need?, please

Thank you so much,it worked wonderful!

Great video! I found that you have to start with 1234 as the code and then change it after. Do that and it will work great!

Thank you! At least i know the starter is not the problem. Much appreciated

Thx bro the reset, it was perfect .....TWYN

Fantastic video! Just installed belt on 93 jd 320...exact components as shown!!! You made process simple, easy & stress-free! Thank you

Thank you for sharing your content!!

Thank you thank you for the instructions. I was able to change the password easily. btw, my garage door opener learn button is purple and works on the number ID#3.

This was a real saver for us. Our transmission belt broke and tore up some wiring. Fixed the wiring just fine and with your video we made sure we had everything else back in place as it should be. Thank you

THANK YOUUU ‼️ After not being able to use our keypad for several years... Here I found your instructional video‼️ (insert happy dance) I even screenshot your written instructions as you suggested.👍🏽 I very much appreciate this video.

have to change one on a 285 thanks

Very helpful video - thank you. The process is nearly identical for my John Deere 240 (just no fan in the rear). Two details that may be helpful for others: 1) with tractor in neutral and with ebrake on there's no need to loosen the spring tensioner, at least on the 240. 2) Nuts only need to be loosened, not removed!

Thanks Jason!!! Saved us!!

Hey my name is Tony i have a question i have a 285 john Deere im trying to put the drive belt on it does it go on the same way as the 265 john Deere

your J/D is easy not all are like this newer gt225 are a pain

Super great video! Worked GREAT! YOU DA MAN!!!

how do you tighten up the pto clutch or keep it from turning.

Thanks homie! It worked!

Wouldn't it be easier to start from the rear and loop the belt over the trans fan?