วีดีโอ

Hi dean, have you got a link to the two hoses that go into the bottom of the thermostat and a link to the hose clamps aswell? Cheers

Love from India 🇮🇳. 🙏🏻🖤

Regarding the rear corner-pieces, I've lost a couple of them AND I tried bolting them in place but, unfortunately, all that happened was that something snagged on one and broke it in half instead of popping it out. The easiest "fix" is just to tie a 6" length of paracord to the corner-piece and then tie the other end to a hole in the body so when the corner pops off it'll just hang there and you can fit it back on again. As for the door seals, I noticed that I could see daylight through the bottom of my tailgate cos the seal was barely touching the bottom of the door. Took the door seal off the bottom of the door and fitted a strip of 12mm x 10mm self-adhesive draught excluder foam right across the bottom of the doorway, just behind the flange the seal attaches to. Refit the seal and the foam strip forces it to sit a 1/2" higher up so it now seals against the bottom of the door. 👍 Looking at your doors, it looks like a similar fix might work there too, if you have any more problems.

Looks a great rig! Is there a cover over the cooking area in case of rain?

We had a fantastic time, would love to go again and explore more areas that we didn't get chance to go to ❤

yeah~how splendid ! see ya!

i didnt get a notification about this upload, but im watching now, boge, boge!

That's a lot of rain through a door seal. I have not had rain come in there, everywhere else, but not there! Good idea though with the tubing. Not had to tangle yet with the back plastic corners so was wondering if fitting the rear steel bumper had changed the clearances. Good looking Disco too!

Howzit All, Have any of you got to the bottom of the leak at the alternator? I have the same and thinknit might be a vacuum pump leak

Im getting back in to CBs but not that good at wiring. Most of the new ones plug in to the fag lighter but not sure about that.. 😅

What type of paint have you used for your radius arms ect?

Hoping to do the same job soon on my 2001. Was there anything you had to do to code out the ACE in the computer? Thanks!

Nothing green and environmentally friendly about what you are doing.

That's the trouble with screaming passengers, they keep you awake when you are driving! Looked a great family day out though. Nice one!

Bit of off road rallying

Apoya en algo la cámara y usa las dos manos......amermelado

You have working sunroofs!!! Good man! There is a chap in Blackpool that does the sunroofs. He did Lollopy for me. Excellent job. This Disco though -could not be bothered. I was thinking that if this Disco was rubbish too, I would not have spent needlessly on it. I like that light bar, looks good.

Dean where did you get the rear light bar from mate?

Remember. Landrover s. Discovery & defender s. Are not 🚫. For speed 🚧. Speed kills.

Thank you!

Interesting idea, not seen that done before, looks ok that. I guess you could also mount it on your roofrack if you had a big roof tent on it to make it a little more aerodynamic.

hi mate, i have the same here, what size hose do you buy? TY

That's cool! I think you might be a tad optimistic though expecting the sun . . . ! Good idea though.

Here's one I made earlier, with the power of editing! 😂

Thanks for this - just changing mine and wondered how the old ones came out. Helped me out a lot! Did you have to disconnect the battery for this job?

It’s apartments there now isn’t it ? Or I am I thinking of wrong place

What new bushes did you go for genuine or aftermarket?

Hi how has the painted frames held up

Good vid. Thanks. The music is distracting. 🙉👍🏻🙏🦘

Certainly brings it back to life again good job 👍 How do you find the brightness of the LED’s at night? Cheers Tony

Extreme offroading as you winch yourself up mountains

Looks good to me. Nice One!

Yep, nicely done. 👍 If it'd been me, I think I'd have taken the solenoid pack off the top of the winch, fitted it under the bonnet and then attached the smaller light bar with torx bolts as a way to deter any scumbag who might want to steal the winch.

Still A great looking Disco ❤

Yes, the trailer needed a lift. You could probably have gone another inch in my opinion. Good job though!

The yellow green wire is the ground? Black wire goes to positive?

Looking good mate

Phat lift kit

Good job!

Hi, I am considering removing the ACE system would you kindly list the parts you used to do it.?

The window on my ZS is stuck closed and I didn't think I'd be able to get it out to change the regulator, but looking at this, it looks like simply undoing the bolts on the regulator caused it to drop down so you had enough clearance?

Brilliant tutorial Dean lad as always, Discos/TD5 are a great engine to work with.

Blimey! Looks a right pain. I didn't know fuel cooler leaks were a thing! Nice one!

Spent some cash on this disco, dollor, dollor

Any idea on DTC Fault then it drops engine power and lowers air suspension?

Looks awesome 👍👍

Interested in the fuel tubing/piping for the doors. Im chasing a leak in the drivers side. I have a cover over my disco when not in use to stop the water but its a right chew putting it on. Ive heard a few people say its the rubber flappy thing that goes over the door stays can let water in also.

Your front headlight grills,are they plastic or metal

This is definitely not for the faint hearted mate, really well done, brilliant part 1&2 . There isn’t another vid half as good detail as this, it’s a job I’ll definitely tackle after watching this! Cheers and look fwd seeing more mends on the Disco 2 👍✅

Awesome need to do mine and my sons looking good 👍