วีดีโอ

Having same problem and it makes the rpm get stuck above the 2 until it says transmission overheating... does the canister fix all that?

Haha it’s a miracle just realized it’s -40 in my car today

I purchased AC Delco Part 12690512 and installed it. However, the original part that came off the car was 12610560. The parts look alike. I hope they are actually supposed to be interchangeable. I will wait to see if the "permanent code" PO496 actually clears after driving for awhile. About a week later, after a few short trips the "permanent" "Check Engine Light" went out. I guess the problem is solved. My thanks to you for the great video!!!! About a week after my "check engine" light went out a warning came up on my dash that the fuel filler cap should be tightened but when I checked the cap was as tight as it can be. I wonder if this happened because the part that I used was slightly different from the original part - although it looked the same.

Great video, your camera angles are a lot better than the other videos I watched and you get right into the job while explaining it well. Thanks.

Your video was straight to the point, you gave a part number and you didn’t give any excessive explanation about anything. You helped me save money by doing this at home instead of taking it in. Thank you, man!

Firestone just told me $298 to fix this issue. Ha....headed to auto zone in a few minutes. Ty for the vid and your service

Explanation?

Im a general contractor and I just installed a 10ap in a detached garage I built for a client. The instructions sucked! Haha but we made it through it!

i appreciate you bro i needed a walkthrough before i did it🫡

Thanks a lot bro. This helped tremendously!

Ima try this but mines read decent temperature just my a/c going in out and i tested everything else but this 🤞🏾

What tool is that?

Thank you Mr.Thomas Lavery for your very helpful video!!!!!!!

I broke the 10mm bolt in the bracket part how can I fix

That bolt is not a 9mm....its a 10mm

Awesome video, so much faster than pulling the bumper cover, the tip at the end saved some swear jar money as well!

Damn I wish I saw this video first. I just broke the damn plastic piece off the hose

Mine was a 10mm socket on my 2015 Impala. Otherwise perfect instructions, problem solved.

Awesome video. Perfect

Wow' you saved me time and costs, Chevrolet wanted to charge a large amount to replace this $59 part. Thanks

Thank you for the excellent video. I replaced the valve per the instructions and the car started right up at the gas station whereas before it would struggle to start after filling up with gas. However now the car is idling very rough. Anyone have any ideas?

Thanks my friend has the outer plastic cracked on 2016 Malibu and just wanted to replace it instead of replacing the whole headlight but the price is about the same

Glad I looked this up and found your video dealer just quoted my girl 400$ to replace this thing time to bust out my tools 🫡

Perfect video. From setup to replace to cleanup, I was able to get this done in 30 minutes. Thank you!

My 08 is doing this , good quick test , I have an altel as well they are key for this

I'm glad i watched ur video cuz i woulda broke dat hose with the clip, filling up with gas would make me have a heart attack

I'm back here again for a refresher. I'm having this same issue again. Check engine light came back with same codes and symptoms. About to start working on it. Going to insoect the area to see if i did something wrong the first time. Either that or the part itself was bad. I'm still going to research why and how these valves end up failing.

Lifesaver thank you

I’ve replaced this twice already, by chance anyone run into this issue? If so what would be the next step to figure out the issue. After I replace the part, the idel after gas stops up until it defects again

Is there a way to clear the code after replacing the Valve, if we don't have the diagnostic machine?

I have a 2017 FWD and a noise is coming from what sounds like behind the front right tire and it only kicks in once i get to about 16mph. It gets very quiet like it isn’t there when i turn right but when i turn left you can hear it. Its like a boat engine in a way.

Hi I just did the change to my car and the check engine light is still on, is there something I’m supposed to do so it gets cut off

1 run through your video and you saved me quite a bit of $$$$ and time!! Thank you so much! My dad was impressed!

Thanks bro 🤝

Thanks for your help

Sir!!! With your guidance I was able to replace mine today! You made it easy and I felt confident while doing it. As a girl whose dad was my mechanic and he is now passed, I didn't want to take it in so I think he would be very proud of me! Thanks for your help and making this video🙏🏾

how does that break spring go off that brake i cant seem to find out where it goes

Thank you for this video! I would love to know your opinion on a question I have regarding my 2012 Chevy Impala. The body shop I ended up going to, wish I had seen this video first ;) they repaired the ambient temp sensor but noted also I may have a faulty Temperature Control Head. As of today, 1/2/24, my windows, front/rear/sides all fog up if the temperature falls below 32° and when I try to run the defrost using the A/C button, it flashes and doesn’t turn on. Above 32° the A/C button will come on and allow for windows to defrost. Before having them do the work, the inside of my car windows were actually getting frosted over almost like I needed to scrape the inside of my windows. And it wouldn’t defrost and same thing happened where the A/C button wouldn’t work. So, although I don’t have any frost to scrape on the inside of my windows anymore, they are still fogging up if lower than 32° outside. I don’t know much about the temperature control head and its function. Wanted to know if you had anything to offer on this. Thanks so much!

Thanks for the video I’m getting ready to swap mines

Going to change this part on the wifey car soon. Thanks for the walkthrough

Going to change this part on the wifey car soon. Thanks for the walkthrough

Yeahhhh just snapped mine off

I have the same wd40 cans and never knew you could spray without extending the red straw

Great instructional video. My purge valve was replaced by the dealership about a year ago and the check engine light is back on with symptoms similar to yours. I was told that they should have replaced the canister by the gas tank. Have you heard that? My car hesitates to start immediately after I get gas and it has even stalled at red lights. It also idles rough at times. Have you heard that it's typical to replace the purge valve and the vapor canister?

Good video help out a lot, thanks ! 👍🏿

Thank you for the video it helps me allot when I change my trans oil. more information vent cap is a 11/16 wrench,1/4 allen wrench for the plug, 3/8 bolt for oil filter cover.

I pick my up in the morning. Can't wait

Thanks!

I'm going to let you know the results once I changed it because before I'm hearing knocking in that area or pounding

Perfect instructions. Thanks a bunch!