วีดีโอ

@lukakosir235 no worries. I replaced these EGRs myself, not that hard bit fiddly though. Just remember to put some cloth or paper underneath egr so if you drop any bolt, it gets caught on it. Also tie small tools with a thread so if it falls you can pull it back out. But i later ended up reflash with the EGR delete.

@missedtheeggmcintyre417 Power comes from usb port.

@Andrew-uu6oq its been four months, and they are good as new.

Must have previously installed the new steel sump plate with separate filter assembly

@moinmuhammad2122 thats great. Likewise, i was also just giving it a try, luckily it was good outcome.

Search for t10 w5w bulbs in general. I can't find the exact part no.

Thanks. Good inisight. I didn't know it at all. Thanks for the info, appreciated.

I got 4gb ram 64gb internal memory. OS was Android 12.

@@DISCO3_BEGINNER great thanks. it works good for candid auto and google maps?

I hope the link works. Just note that middle perforated section of each cover is not a real leather as they claim in the photos. I only found out when i had to cut a hole for a clip on rear cover, but the cover itself is very high quality. Quiet happy with it. There are few similar item seller you can try for price comparison. a.aliexpress.com/_mMxXo2i

No. My model is SE, so doesn't come with the display

I got it from aliexpress. It cost me just under AUD400. You can the seller pics of your dadh and they will confirm compatibility

I used Bosch BD1922 OEM Replacement Brake Disc Rotor Pair 317mm dia. Its mentioned just after 20sec in video.

@@DISCO3_BEGINNER Understood, thank you very much for the information, it is an excellent channel. Greetings from Ecuador

@@patricioortega7234 thank you for your support

Glad that video might have helped you. I bought it on ebay. You can search 'inner tie rod remover tool'. Cost me AUD55 last year.

Yes exactly what i felt. Also for the rear camera, i havent done it yet as cabling to the top tailgate has stopped me so far. I have been bit lazy to think and do something about it. I have already bought the holder type light cover as you mentioned from aliexpress. How did you run rear camera cable from rear headliner to the top tailgate.

Yes i did. I think being a new owner then, i wasn't used to with the slow acceleration. It's a 2.7 tonne car when full tank and me in it. So i believe the shift wasn't as bad before i did the rebuild anyways. I even took it to transmission specialist for test drive. They drove it and said no issues with transmission.

Hi mate Yes, its 9inch screen. I am pretty happy with the features. I bought it for Android auto connection, which works perfect. I guess apple carplay should work fine too. The front camera recording is good. However, i haven't installed the rear camera as yet. I need to find a way to figure out getting cable from rear side to the upper tailgate. I haven't had time to do it. I have ran cable under the headliner up to the top rear side but not installed the rear camera yet. I also haven't connected a tire pressure sensor monitor yet. I think that should work fine too. Overall, it serves my purpose of having phone connectivity. If you can find a good deal on aliexpress, it's worth it.

I can’t say for absolute certain, but I’m pretty darn sure that I did notice a drain plug in the very back floorboard on my ‘05 LR3. But if my memory serves me correctly and that “is” what & where I saw that drain plug, I personally will most likely try running it up thru that hole, whenever I get this similar setup in the near future. I measured my factory screen tho, after I’d commented on your video the first time, and measuring diagonally at its widest width, I wanna say that I think I could only get 7” out of mine. lol. I’ll check it again when I go unload some things here shortly. Let me know tho, if you find that drain plug/hole I’m describing. Reason I discovered it, was due to my back tailgate that stopped opening. And I had to pull back the back floorboard carpet etc. and that’s when I noticed it. Have a look underneath the carriage, near where, or right where the spare tire sits against the underside of the back floor. Mine has aftermarket rims & tires. So the spare wasn’t there when I bought mine used. So that spot is empty. Maybe yours has the spare tire in that same spot. If so, & if you don’t see the drain I’m describing anywhere else, lower that spare tire & have a look-see in that area. Good luck! Let me know what you find out, if you do go hunting for it! Thanks for the reply, bud!

@@SueDohman thanks heaps for the thorough explanation. I will look into it in my free time.

You mean changing the bar itself?

Not sure what you mean by 4x4 settings. I dont think it has that feature enabled through this unit.

Yes, it's not easy. You need extra hand to help you out while doing this.

Not yet. I have ran cable to front and back side but not had a chance to install cam yet Will upload another video when i do it.

Can I use copper grease ?

Do not loctite any bolts on the brakes WHAT😭

I have noticed a slight reduction of noise and heat dissipation but not a whole lot. However dont have a scientific proof as i didnt do any noise or temperature test before installing the insulation. I think if you are dropping tye headliner for some other task, its well worth. But not worth for just to install the insulation

I just checked my ebay order history. I bought the actuator suitable for FORD FUSION - 2002-2012 OR FORD FIESTA Mk5 / Mk6 2002-2008

I had planned to use sealant but when I dropped the pan, previous owner had used metal/rubber type gasket. I checked the condition, it was pretty smooth and looked fairly new. So I only cleaned up the mating surfaces on the transmission and bolted the pan without any sealant, no issues so far. I have driven almost 5,000km. I guess if you are using the paper or rubber type gasket then you would need a sealant. You can search for 'LAND DROVER 6hp26 Service kit metal/rubber gasket filter (suit steel pan) non gen' on mjproducts.com.au

The metal and rubber gasket is a Ford part. The same transmission is used in some Ford (I think it is a Ford Territory in Aus) vehicles, so if you can cross reference the ZF6HP26 and see which Fords were sold with that transmission, you should be able to buy the gasket from Ford.

Hi mate. I bought LH and RH set including inner and outer rods for around AUD160 ish on ebay. I used discount code on ebay to buy it at that price. If you dont know already, ebay generally has discount code for certain sellers that buyer can use and save significantly. I can send you the exact link if you like.

Thanks for the reply. I also wanted to buy the TRW product you used, but this time I ordered only the left and right tie rod ends using the lowest price Febest product. I bought a 2009 Discovery 3 with 275k km on it 2 weeks ago and it needed repairs in too many places, so I chose the lowest priced part. Your video is very helpful. Thanks

@abchkbh All good. I am on the same boat. My one is 2007, and has lot of minor stuff to fix. In my ownership of 10 months i have learnt so much. My take is Discos are not for the ones who are not hands-on and not keen to DIY. It will end up being very expensive. Trick is to invest in tools and do as much of maintenance yourself. Ebay is your friend, not many ppl know that it has discount code features every month ranging from 5 to 30% off. If you are good at shopping around you can get much better quality product on similar price as inferior ones. Febest are not bad but I think the price i got my TRW ones was close to other cheaper ones. Good luck and happy land rovering..

@abchkbh also you can check out oem warehouse australia ebay online shop. They sell genuine product at fraction of cost. I bought LH EGR valve Valeo brand for $90!! The market price was around $350 plus. I bought inner tie rod genuine for $55, market price just under $200. I think they get hold of items with minor defects like damaged packaging, missing bolts and so forth. But the actual parts are fine.

​@@DISCO3_BEGINNERGreat thanks, Can you share seller's name? Can't find that seller on ebay. For reference, I mainly use lrdirect, mjproducts, trspares and my local Land Rover parts store, and finally compare with eBay to make a purchasing decision. Cheers

I have only driven around 5,000km so fsr no issues. I have been to few LR specialist mechanics, and they are adamant that one need to use genuine oil. But in my case its fairly old car, so i couldn't be bothered to pay more than double price for the oil.

Thanks. Yes, I had the same issue. It took me some time to figure out that there is a plastic pin you need to clamp hard to press it through the zip tie. Its not easy as you need to hold zip tie tight and fiddle with plier to press the pin.. but doable..

Yes, the radio unit will still work.

I reckon any auto electrician could do it. But honestly, I think if you have time and patience, it shouldn't be that hard. I didn't choose 360-degree camera option for this unit but it does have 360 degree option if you want. It will come with four cameras, there is a bit of a drilling involved in side mirrors but i dont think it is difficult, time-consuming, for sure.

Thanks for the feedback. I will try to include final look in future videos. As you would have noticed, i am just a hobby youtuber so still learning.

Yes, may be. As per my channel description, i am a beginner and never intend to be a professional youtuber. I am just documenting what i do by myself with no helper and when i have time during weekends. If someone finds it helpful great, if not thats fine too..

Interesting feedback. Remind me how many videos you've uploaded and the name of your channel? Thought so. Easy to criticise, not so easy to do.

Thank you vena. Still got heaps to learn and do..

In my case, there was no issue with parking brake. The reason i did bedding procedure was because i had to replace brake rotors. It was working fine with normal noise of motor engaging and disengaging..

@@DISCO3_BEGINNERah ok. Mines making a clunk engaging sound. But I noticed rear brakes and pads seem newer. So I am wondering if they adjusted at all? I recently purchased this vehicle.

​@@ShirleyAerialworth checking the adjustment