วีดีโอ

a complete around the world trick on the Kendama in under 10 seconds!!

Amazing, Kendama around the world trick completed in under 10 seconds by Ronin.

I laminated up some pieces of scrap plywood to make a bowl shape. I roughed out the shape with an adaptive tool path and a 1/2" cutter, the used a spiral tool path and a ball endmill to smooth out the bowl shape. The final contour was done with a down cut bit then a 1/2" straight cut bit to cut down to 2" deep. Lastly a pattern bit (a dull one) was used to remove the remaining 1" of stock. Than...

Cutting some PVC sheets on my home built CNC router. 3/8” sing flute cutter taking a 1/2” depth of cut and running at 0.016” chip load.

These guys were really proud to show off their new Fire 8HD tablet.

Milling wooden prop pistol grips on my home built CNC router. Total cut time took about 30minutes.

Making a pocket using a spoilboard facing cutter. Running 720ipm and 2mm depth of cut. Video is not sped up.

Watch as I inbox a micro swiss NG before your very eyes

Cutting some PVC on a Stepcraft Q408 with an Amana 51414-k 3/8” single flute cutter. Running at 10000 RPM with a feed rate of 4.3M/min. Slot cutting a depth of 0.5” at the start of the video but then at the back of the machine it starts taking a full 1” deep cut by accident. Look at all those chips. The dust boot doesn’t come down low enough for this long cutter so the chips are everywhere. Tha...

Using my home made CNC router to machine the pockets for hinges in some fir for door jambs. Works pretty good. This is the last of 7 jambs I made today.

I got impatient, so I sped the cut speed up to 270% or 31mm/s. Still cutting awesome.

Cutting HDPE for some Kregg mini tracks in my vacuum bed. Using a 1/4” single flute cutter at 20mm/s or a 0.002” chip load and a 3/16” depth of cut. I’m pretty pleased to see it cutting!

Hello everyone. Here’s a quick video of my customized 3D printer with its latest modification of a bondtech LGX extruder with a liquid cooled copperhead printing some polycarbonate parts at 300C. The build chamber is heated to 60C the bed is at 155C and I’m using a 0.8mm nozzle. The print speed is upto 60mm/s. The parts are looking amazing so far. Thanks for watching.

Bondtech LGX FF liquid cooled upgrade.

CNC router build first moves. Duet 2 controlled CNC router 4kw spindle on a Vention frame.

Glow in the Dark PLA Halloween mask on my Ender5 pro Micro Swiss Direct drive

Printing some PETG parts on my modified Ender 5 pro with DUET wifi board

Printing a prototype fan from PLA on my Ender5 pro

PETG on my Ender5 pro with micro Swiss direct drive extruder

Sakata PLA 850 on my Ender 5 pro custom

3D printing Polycarbonate with an Ender 5 micros Swiss direct drive

Ender5 Pro Duet2 Wifi printing PETG direct drive

Ender5 Pro upgrade and Duet2 Wifi

TPU iPrint3D...Ender5...Will it stick?

Nylon printing on Ender 5 with Micro Swiss direct drive extruder

Printed Nylon using Garolite bed - Ender5

Flying a 3D printed model rocket if my own design

Ender 5 Pro PETG removal from Glass bed

Ender5 Pro printing Polycarbonate