วีดีโอ

bra video . Min webastor på yetin har slutata att funka. verkar vara samma model. fick du en felkod eller startade den bara inte??

When there is nothing to do on my own cars I watch videos

mix diesel in fluid film it i be thinner and creep better. Then the diesel evaporates in a week or so.

Very nice, planning to do this job too on mine, may even go for the 280mm disks. Where did you get all your parts?

Jeg tror 15 cm isolasjon var litt "over kill". Jeg bygde en 1.3 kubikk stor ovn med 2x3 kw elementer fordelt på to 16 amp kurser. Den er isolert med 4 cm glava, den når 200 grader på 35-40 min

why... dear God why?.... Would you disassemble it without de-greasing it 1st? other than that.. great job man..!

Nice job, mine is ev where should I get the part from? EV not much part for it.

When are you gonna do the rear brakes?

wow, nice sets of wheel rims you got there mate, cheers from Indonesia😊

We're u using heat as these are the same style as min and there are solid

Cool video! I like your Stiga Snowfræser!

This is a styline Deluxe not a BelAir

Where are you from

Man kan virkelig se på hvor lidt jeres biler ruster, at I ikke bruger salt på vejene som i Danmark og Sverige. Man bliver helt misundelig! 😅👍

There not galvanised or at least well done like Hondas like I always thought then. I guess your set on the blue paint and boxer sound you paid all that money for? I had a few scabs under the wheel arch liners and a bubble on the rear boot flap of my w203 and have pulled it apart and fixed it and was worried. Wow. I’m good

What about vacuum booster (sorry for my interpretation)? Without it pedal pressure will be hell strong before good braking.

Have one of these engines in my mk2 jetta but the engine isn't so happy

Love the MK2s. Twas my childhood car. 87 GTI, 2 door. I own an 88 GT, 4 door.

Where do you buy your parts?

Cool video, woukd love to see more of the justy

imreally looking this complete engine

Nice work,put plastic cover before tappet cover,why silicon on the head...nice work

Looking perfect and easy to make it❤

The gas is HHO2, or "Brown's gas".

I love electrolytic process, have restored a fine engraved GEDORE toolcase that belonged to my grandfather without harming the engraving. WHat I like best is it doesn't harm a molecule of good metal. it is a line of sight process so better to have some sacrificial rods in each corner.. or you will have to keep turning the piece once in a while

beter results if you degrease parts first

Where did you get the chrome window trim?

I use a wire wheel but thats painful and messy lol

You can use the GTI oil pan gasket with Crank Scraper I believe, I have one on my mk3 2.0 block.

Fantastic job and video!!🤗

Passat b5 ❤❤❤

Where’ve you been ??

Beautiful🔥

1.9 TDI 💪💪💪💪💪

What is the color code of the golf?

Beautiful Passat ❤

256mm?

Nice job. very clean work. After driving, do you notice a difference in acceleration, and any difference in the corners on bumpy roads due to the higher un-sprung weight? I'm in the process of doing this, and I weighed the calipers and rotors i have they are a 3 or 4 lb heavier in weight. I'm going from 9.4" solid rotors to GLI-and-others-spec: 10.1" vented rotors

Well done friend and thanks for sharing, I love MK2 golfs, maybe because I used to drive a 1986 two doors in alpine white in mid nineties what a lovely car❤

Thanks you

you forgot to dress the crankcase

Please, rebuild my engine

3 things dude. 1. dont lock the cam pulley the way you did aluminum is soft. 2. Where is the splash plate under the cam cover , definitely gonna leak. 3. never use silicone of any kind anywhere near where theres petrol ... hope you primed the oil pump before you started it.

Just a heads up try not to use gasket maker on cork gaskets or any gaskets usually makes it more prone to leaking. Should seal perfectly without it unless the oil pan or rocker cover is warped.

What manual are you using? I bought a dune buggy which appears to be the same engine so I’m trying to find a service manual and any info on what parts I need to get.

Wheel bearing is a perfectly valid description here. Need a bigger hammer though usually.

Hello, is this braking device compatible with 14-inch rims? Thank you.

Bom dia, Excelente trabalho, quando você vai instalar no carro?

Not measuring crankshaft journal diameter or connecting rods ID? Assuming you have the right dimensions and bearings is a big risk when you have the engine all the way down like this and you doing this much work

Perché "mediocre" ? The rust is relentless !great job