![Turner Truck and Tractor](/img/default-banner.jpg)
- 62
- 125 171
Turner Truck and Tractor
United States
เข้าร่วมเมื่อ 21 ม.ค. 2020
Thanks for checking out my channel. Like a lot of you I am a life long gear-head and a fan of most anything with an engine. While I'm not a professional watch as we put trucks and tractors to work and share what goes on to keep them running. I might throw in some BBQ and other adventures on the the side. I ask that you consider subscribing. Thank you.
My Amsoil store page link is to my independent dealer storefront in which I will make a (very) small commission from any sales. Any purchases are appreciated. Independent dealer #505383.
My Amsoil store page link is to my independent dealer storefront in which I will make a (very) small commission from any sales. Any purchases are appreciated. Independent dealer #505383.
WE MADE IT TO DEMOLITION RANCH'S DESPERADO MEAT FEST!!!
Took the family crew to Matt's Meat Fest (sorta sounds wrong) at the Desperado Resort in Boerne Tx on Saturday 08/03/24. We live around the corner actually but met Demolitia from all over the U.S. Got to meet some of my favorite TH-camr's but have never meet Matt actually, maybe one day. He was constantly surrounded like a mall Santa at Christmas and was a great host. Some of the best BBQ ever and we enjoyed the day greatly. I tried to live in the moment but stitched tougher some short clips and photos to share. Hope you enjoy. Please like and subscribe too;)
@DemolitionRanch
@OffTheRanch
@ChudsBbq
@MadScientistBBQ
@holdenbros910
@OutontheRanchwithDrLee-xb4lo
@DemolitionRanch
@OffTheRanch
@ChudsBbq
@MadScientistBBQ
@holdenbros910
@OutontheRanchwithDrLee-xb4lo
มุมมอง: 2 008
วีดีโอ
THE COMING KING CROSS, KERRVILLE TX
มุมมอง 16614 วันที่ผ่านมา
We took a day trip to Kerrville TX. While I have seen the cross before on I-10 many times I have never stopped by. I am glad we did and recommend it. The Coming King Sculpture Prayer Garden, 520 Benson Drive, Kerrville, TX 78028. Music from #Uppbeat (free for Creators!): uppbeat.io/t/brock-hewitt-stories-in-sound/holy-holy-holy License code: FSFWUAICHOFVXF9E
TRACTOR PULL - At the Agricultural Museum and Arts Center. Boerne, TX.
มุมมอง 10914 วันที่ผ่านมา
Hot Summer Night Antique Tractor Pull 07/27/24. The weather was great and one of the largest crowds I have seen. I am lucky to have such a cool event so close to me. One observation was Oliver tractors are usually in the minority but they were out in force this night. #johndeere #farmall #minneapolismoline #oliver #tractorvideo #tractorpulling #boerne
Shop update. Spray foam insulation.
มุมมอง 70หลายเดือนก่อน
It was incredibly H-O-T in the shop and I could feel the heat bearing down on me so I had a local contractor install 1" of closed cell foam insulation on the ceiling. Initial results have been positive and I can tell that it is cooler. Hopefully it will allow more hours in the day and more days during the year that I can get out in the shop. #sprayfoam #sprayfoaminsulation
The Oliver 770 comes home.
มุมมอง 70หลายเดือนก่อน
New front tires gets the tractor home then time to clean it up and see what we got. #tractor #oliver
TT&T gets a truck and a tractor! Mack B61 and Oliver 770.
มุมมอง 822 หลายเดือนก่อน
Big day for my brother and I as he gets a Mack B61 and I get an Oliver 770. If you have an idea what we need to do with them to get them up and running or you drove one of these in the past comment below. #macktrucks #tractorvideos
ROAD TRIP! C10'S ON THE BRAZOS, WACO TX, 2024.
มุมมอง 1382 หลายเดือนก่อน
We got best of no-show! The day before the trip we installed a new GM style HEI distributor to replace the 50 year old points and condenser set up. The throttle response was better, it attacked the hills without pinging, and ran better than it has ever ran before...till it didn't.
FORD JUBILEE/NAA PART 3 - THE FINALE. Three point hitch fix.
มุมมอง 1763 หลายเดือนก่อน
After repairing the wiring and ignition system the owner wanted us to look at the three point hitch to see if we could get it working again. I have never worked on a three point before but we got it fixed but not without frustration and learning about the unloader valve along the way. We do it right because we do it twice. Hope this helps someone in the future. Please like and subscribe.
LONESTAR ROUND UP 2024, AUSTIN TX.
มุมมอง 2.1K3 หลายเดือนก่อน
Lots of hot rods, customs, swap meet items, bands, and food trucks. Got to meet my favorite TH-camr's Puddin, Slick 50 and Mortske (and they were awesome). It was a great little day trip. Hope you enjoy the video. Please like and subscribe. @PuddinsFabShop @MortskeRepair
TOTAL SOLAR ECLIPSE (sort of). Path of totality. Boerne TX.
มุมมอง 714 หลายเดือนก่อน
We were in a prime spot in the path of totality. However we were also in the path of near total cloud cover. It did get dark for a few minutes and the birds got quiet. I guess we'll wait till 2044 for the next one.
Tractor pull and car show, Boerne Texas, Saturday April 6, 2024.
มุมมอง 2014 หลายเดือนก่อน
Boerne Spring Antique Tractor Pull at the Agricultural Museum and Arts Center in the afternoon and the Black Rifle Coffee Company Block Party in historical downtown Boerne in the evening. For a gear head this makes for a good day.
Ford Jubilee/NAA - Part 2. Electrical Issues fixed and other issues found.
มุมมอง 1534 หลายเดือนก่อน
Lyle and I replace all the burnt and melted electrical components and rebuilt the carburetor. Does it run? What other issues did we find at the end? It means a lot to us if you would like, comment, and subscribe.
Highlighting tractors by the FFA Ag Mechanics youth at the San Antonio Stock Show and Rodeo 2024.
มุมมอง 635 หลายเดือนก่อน
Spent the afternoon and evening at the San Antonio Stock Show and Rodeo. Wanted to quickly highlight just some of the projects of the area youth and the sights and sounds of the rodeo.
Ford Jubilee/NAA tractor in the shop. Can we fix it?
มุมมอง 3245 หลายเดือนก่อน
Ford Jubilee/NAA tractor in the shop. Can we fix it?
Ecoflow Delta 2 portable power station.
มุมมอง 2776 หลายเดือนก่อน
Ecoflow Delta 2 portable power station.
Take this job and shove it, I QUIT! (sort of)...and welcome to 2024.
มุมมอง 1487 หลายเดือนก่อน
Take this job and shove it, I QUIT! (sort of)...and welcome to 2024.
BOERNE HILL COUNTRY MILE ROD RUN 2023
มุมมอง 37210 หลายเดือนก่อน
BOERNE HILL COUNTRY MILE ROD RUN 2023
Tore up from the floor up. Installing sound deadener and insulation in the 67 C10.
มุมมอง 23110 หลายเดือนก่อน
Tore up from the floor up. Installing sound deadener and insulation in the 67 C10.
C10s in the Park 2023, Waxahachie TX.
มุมมอง 1.6K11 หลายเดือนก่อน
C10s in the Park 2023, Waxahachie TX.
On The Sauce (again). Applying Sweet Patina Sauce to the 67 C10.
มุมมอง 9011 หลายเดือนก่อน
On The Sauce (again). Applying Sweet Patina Sauce to the 67 C10.
Gettin' Shady. Window tint on the '67 C10.
มุมมอง 2611 หลายเดือนก่อน
Gettin' Shady. Window tint on the '67 C10.
John Deere vs IH vs Case vs Oliver. Antique Tractor Pull.
มุมมอง 259ปีที่แล้ว
John Deere vs IH vs Case vs Oliver. Antique Tractor Pull.
My Microdiscectomy Journey. Surgery day, first day home, and initial recovery.
มุมมอง 504ปีที่แล้ว
My Microdiscectomy Journey. Surgery day, first day home, and initial recovery.
Will a microdiscectomy make my tractor run better? Channel update.
มุมมอง 78ปีที่แล้ว
Will a microdiscectomy make my tractor run better? Channel update.
John Deere 2025R compact tractor walk around, review and upgrades.
มุมมอง 14Kปีที่แล้ว
John Deere 2025R compact tractor walk around, review and upgrades.
Just horsing around with the shop guest.
มุมมอง 422ปีที่แล้ว
Just horsing around with the shop guest.
Have a 1906bp that i plan on pairing with my 355sbc should make my 57 gmc happy
How much was the tickets?
$65 for all you can eat bbq, free beer and other drinks, no limit. It was from 11:00 - 7:00.
were
@@michaelm7422 Desperado Resort, Boerne, Texas
@@lauraturner9494 I hope they make it thu to sun. Thu kids family, fri to sun october fest style.
@jani_kahkonen Yes, yes, I'm very familiar with the place 🤔 ( "were not was" or " where not were " ) 🤦🏻♂️🤦🏻♂️
The Battle of Armageddon will be fought in the future near the end of the tribulation, demonic influences will cause the kings of the earth to gather their armies for an all-out assault on Jerusalem and the antichrist will be leading the charge, Jesus Christ will return to earth with the armies of Heaven and His feet will stand on the Mount of Olives, He will defeat the forces of evil and He will cast the antichrist and the false prophet into the lake of fire, He will bind Satan and He will set up His kingdom on earth for 1,000 years, At Armageddon the Lord Jesus Christ “treads the winepress of the fury of the wrath of God Almighty” and all things will be made right.✝❤
Wish I had the nerve to, jump in one of our old rides a go lol I would be stopping at the bathroom every 20 minutes. Nerves a wreck. But being passenger in one was pretty nice thanks buddy. Greta looking truck btw. We had a 68 Chevy and redid it here lol
Love that tractor. Wow. Heck ya buddy !!
Seen you on puddin fab shop comments wanted to check out your channel. We subscribed. That’s a big ole piece of machinery there man !!! Great video man.
Yes Puddin's Fab Shop is one one my favorites. Thanks for subscribing!
Please learn how to pronounce “Edelbrock.” You keep saying “el de brock.”
Would have been a good video without the goofy music
I really need to do that, it's so hot in my shop. Please let us know how it works out, hot and cold days. Did they charge an arm and leg or was it reasonable?
So far I have been pleased and can tell a difference. The shop is 1,200 (30x40) sq ft and 4:12 pitch roof and was just over $2 a sq ft drive out for ceiling only. I would say they earned it. By the time you pay for equipment and labor for three guys in full respirator masks and jump suits on a hot summer day it can't be a get rich scheme or comfortable work.
@@turnertruckandtractor Excellent, I really appreciate the information. I’ll be getting some quotes soon enough. It’s time! Thanks again.
“Murlin” The name fits.
I have a feeling you won't need the tune up kit.
Kudos to you sir most people put way too big a carb on their car
do you know how many watts this runs at?
1 horsepower (HP) is approximately equal to 745.7 watts so about 1100 watts.
You should turn this into a series. Great vid
Agree. There slot of work there for sure man
That is one beautiful truck, B61 Mack,😮I love it , Iwill take it just like it is , I could move a ton of houses , with it, thanks BigAl California.
I tint my own rigs. I just buy it on the roll. My trick is a high quality blade in my knife, a good straight edge, and a good squeeze with wrapped edge to prevent scratches. If I have application fluid that’s good but if not I may add a small drop of dish soap in my spray bottle. It does take a little nerve & not worth it to do it for a friend.
I am scheduled for laminectomy L3-L5 next week. 71 year old here, had two heart surgeries, and one previous laminectomy 25 years ago. I am diabetic but controlled on pills (no insulin). I have been a couch potato for over two years now due to weakness in my legs (have taken several falls and sciatica mostly when I stand over a few minutes ( been using a cane for a year). Needless to say, I’m totally out of shape even though I’ve had outpatient and in home physical therapies. Doctors say I need to do something in order to avoid further and irreversible damage. I did get 3 opinions and they all said the same. My wife takes me to various doctor appointments and to church on Sunday because I no longer drive so she is accustomed to going the extra mile regarding my care. I am looking forward to getting my life back by being able to work around the home and yard. I’m looking forward to providing my wife with some relief by not being my 24x7 nurse
Best of luck and prayers for a successful surgery!
enjoyed your video! Jealous as I so want a 2025r. Curious, have you used an auguer attachment?
I have not used an auguer attachment on it yet. Our soil is so rocky that post hole auguers are not effective and no grains are grown here for grain auguers either.
I wonder how the AVS2 500cfm would feel versus the 650 AVS2 as the improved feel you have might be based on the new design rather than cfm size.
Very true. I changed two variables to your point. Just did 300 miles in it last Saturday and it did great.
@@turnertruckandtractor I am thinking of going from a 600cfm non AVS2 to a 500cfm AVS2, so the opposite to what you have done, not sure now which way to go 🤣
@@RamblingClassics if your engine is under 350 cu in and under 5000 rpm’s I would lean towards the 500 AVS2.
@@turnertruckandtractor it is a 327ci so yes I think the 500cfm AVS2 will fit very well so will probably go in that direction. I Very much enjoyed your video and now follow up chat, thank you 👍
@RamblingClassics I just bought the 500cfm avs2 for my 95 mustang gt carb swap project. I'm hoping I didn't go too small. The math says 500 cfm will be plenty.
Nice lawnmower
What’s up with the elevator music
I hear ya. It drowns out the music that would get me a copyright strike and is the lame stock music available.
I like what you have done with the engine. I’m building a vortec 350 for my 53 Chevy but trying to make it look like an old school 283. Has the valve cover set up with pcv valve worked out ok how you have it? Are those the PML valve covers?
Yes they are. I think there is an intake manifold with the front oil fill that would look old school cool too.
How you feeling now are you ok 👍 I will go surgery for herniated disc
It has been one year now and I have done great. I give thanks every day for being pain free. The recovery was rough but in the long run totally worth it. Good luck and wish you well.
Any issues driving over the mower?
None at all since the rear never drive over the mower. The 1.5" spacer is the max without hitting the mower deck guide wheels when it is in the up position though.
Uncle Tony says the Edelbrock cfm ratings are not exact. They are actually much lower than advertised. Is this true?
I've seen tony's video you mentioned. My personal experience supports that idea. When I bought the 500 cfm I thought it was support my 350 at sub 4000 RPM but the 650 definitely made it run better even at low RPMs. I'm pleased with it and not changing anything any time soon.
when you "zoom in" on the cars, you cut off the tops of the roofs.
Nice work
kool to see puddin and slick
The chain just kept coming off, but the last time it came off it bent one of the links. I ended up returning it. I'm going to get one from a different manufacturer like DeWalt.
I was just looking for a video on how to install the chain because mine randomly came off. Thanks for the tips on how to prevent it.
Nice tractor, been thinking of buying one myself. I'd be a little worried about a rubber hose on the exhaust pipe. If it should start a fire, all the plastic on modern tractors makes fire much harder to put out.🙂
Thanks for the concern and comment. It is a hose for turbo and intercooler applications so it's good. No signs of deformation and I can still slide it off and on.
How big is your shop,?? Thanks BigAl California. Looks like a good shop.❤
30x40 with 12’ walls.
Thanks for the video. It helped me get my saw back up and running after the chain fell off.
Its ok, I am always fixing things that's not broke. 😊
I own two of these beauties.. Mine are the later model NAA's which were called the 600/601 and 800/801 series tractors.. All these tractors evolved from the Jubilee(1953)... The later models just had improvements like a bigger motor; called the "Red Tiger" from 134 ci to 172 ci.; larger clutch and 5 speed tranny's..The 601 series were called "Workmasters" and the 801 series were named Powermaster. The 601 tractors had models numbered 601,621,631 641 depending on whether they had live PTO , 4 or 5 speed trany etc. The Jubilee and Naa tractors had rear end axles like the 2N,9N and 8n tractors..The 600 and 800 series did not have large axle nuts on the end of the axle shafts..There are plenty companies selling repro parts for these ie; "Old Tractor Parts, Steiner Tractor Parts.. The tractor you have looks very restorable.. It has a modern 2 wire GM alternater conversion and will definitely melt the 6v coil.. The starter does not need to be changed as it can handle the 12v; it will just spin nice and fast.
I just purchased this air compressor and looks like Harbor Freight added extra 1-2inches of slack to that braided air hose. The floor model in store had the older hose on it.
Good to know. Good luck with yours and your projects.
Mine is at the tender age of 10 hours👍👍…heated cab and front snowblower.
Enjoy! They grow up so fast:)
I bought the atlas 40 V chainsaw and it is awesome, I’ve used it twice now but I cut over 70 trees all different diameters, I go into the back country quite a bit and my last two trips because of the wildfires timber has fallen and blocked the areas I go into, I spent two entire days cutting timber in that chainsaw was awesome I bought the batteries that are 40/80 split And they seem to last quite a long time, I was able to get chains at my local small engine repair store they just matched up chains but I recommend this little chainsaw it works very well and especially for my situation and having extra batteries on hand really helps I purchased four batteries. The chain does fall off possibly because of chain stretch and I’m still running the same blade after all this timber I have cut I don’t know yet if my aftermarket chains will be better, I recommend just checking it while you’re using it if the chain does come off.
What is the number on the hose that you put on the muffler pipe. I have a new 1025-R
Oh man! I just checked my records and that is the only item I do not have. It is a 1.5" 45* turbo intercooler type hose. You will enjoy that 1025R.
Great video! I bought the 80v version and swapped the chain and bar with a 20" husqvarna farm tough bar and chain. I had to modify the bar a little so the oil hole would line up, but it works great!
Will this power a 1/2 in impact wrench? Thanks.
Yes with light use. Long or rapid succession use it will struggle to keep up.
'PromoSM' 😍
I have a question. My atlas saw will go one revolution with chain and die. Any ideas?
I have not experienced that so I don't have anything first hand but assuming a charged battery and nothing is over heated I would check for a chain that is pinching or is getting pinched by debris around the sprockets or cover. The chain brake is another area to inspect and double check. Good luck with it and if you solve it please comment how you fixed it.
I’d have continued watching even if the banner had said ‘Biden or Harris 2024’…I just wanted to learn about your installation! I couldn’t tell on the video, did you use the blue thread lock?
Yes, I used thread locker on the bolts holding the spacer on. I did not use any thread locker on the wheel. Thanks for watching regardless of the banner. It was from my nephew as an inside prank we were going back and forth with and I finally hung it up there.
You'll never see that many running old Ford trucks in one place 😆 Go Chevys 👍
What's up with the shrunken early 60s red convertible C10!?! That thing is wild!
If you still have hesitation issues after installing stiffer metering rod springs, there's a good chance your timing needs to be adjusted. Since you're running a performace cam, you can throw the factory timing specs out the window. Keep advancing the timing until it pings under load or chugs when starting, then back it off a few degrees. Messing around with the vacuum advance helps quite a bit too. Make sure it's actually working for 1. Next, try a combination of port vacuum vs venturi vacuum ports. In my experience, port vacuum seems to work better in a performace application but each engine is a little different. If you have an HEI distributor, most vacuum advance units are adjustable. There's an allen headed screw inside the vacuum port than can be turned to adjust it.
The AVS2 carburetor is hands down the best of all of the Carter AFB / Edelbrock Performer series carbs only for 1 reason. It's the only one that had annular booster / venturies which atomize the fuel WAY better than the traditional style venturies, resulting in more power and fuel economy. It's about as close as you can come to fuel injection without all the headaches and high prices
Great video thanks for the info
Great vid! How did the MPG compare between the 2 carbs?
Good question. No noticeable difference. Granted it only gets driven under a thousand miles a year.