วีดีโอ

Vice is used to eliminate affect of the shooter and other external parameters that can effect the precision/repeatability. Our adapters clamps are tested and confirmed on high calibers like 338, 375 HH... What is relation between adapter system itself and way of shooting (vice or shoulder), shooting range or at the field etc.?

@@rusan-croatia It is nice to know that your adapters clamps provides repeatability because PARD stock clamp don't! When you firing with rifle from shoulder the recoil deppends only on calliber you're shooting! But when you fix the rifle into a vice like so you are adding weight to the rifle sistem and reducing the recoil! The recoil isn't the same with a rifle twice or three times heavier!

Pokušajte pitati u Greensport i u Top Gun Požarevac. Ako nemaju na lageru, mogu naručiti

Pozdrav, Allex! Pokušajte poslati upit u trgovine topgun.rs/ i greensport.rs/

1.2 Nm is recomended torque

@@viktorsebesic3506 235 eura

It is problematic scope to mount clip-on device. This front tube is 33 mm or so in diameter, and it is very short. If we produce adapter in this diameter, it would be suitable only for short and light clip-on devices.

In such case, you need to use our included tape 0.5 mm plus 1 mm tape. So the adapter will clamp on 40 mm. It is not good to clamp on the front ring only.

@@rusan-croatia every time i would have to clamp it on the way you do in the video? Very unpractical, it renders useless whole idea of quick put on and take off...Or can that tape be glued inside the adapter and get over the 41 mm ring and still hold well on the 40mm okular after clamping??

@@tokurhajec No. Adapter, because of its construction, can not be opened so much that you could put something smaller over something bigger (40 over 41 mm). One option is to keep adapter always on the scope and take down device. Other option is to glue tape on the scope ocular to make it 41 mm. You can send complaint to Zeiss why front ring is bigger than the ocular housing itself 🙂

@@rusan-croatia I was thinkin, if i glued 1 and 0,5 mm tape inside 43 mm adapter, i should still have 0,5 mm play to ride over 41 ring or would it be too tight? I am only asking because i do not like option of permanently glued tape on the scope nor permanent adapter. Your adapter costs somethin, i am only trying to figure out if its worht buying, because i do not have opportunity to try it prior the purchase.

@@tokurhajec This adapters when put in open position, does not open (widen) for 1 mm. So you will not be able to slide it on as you imagine.

Krypton first edition and Krypton 2 uses exactly the same adapter.

This socket can be used to put short picatinny rail and use for illuminator or something simmilar. Flip-up cover coming soon 😊

Screws does not push directly on Krypton thread. Adapter consists of outer and inner part. Set screws push against adapter inner part, preventing its rotation.

Yes, it is available in 34 mm size. It looks as it looks. Adapter is constructed to fit most of clip-on on the market with optimal see-through diameter so it does not block too much of light on bigger scopes. And adapter interface must be the same for all scopes from 30 mm to 80 mm, to be exchangeable.

@@rusan-croatia thank you!

if you have any questions, you can ask us at sales@rusan.hr ☺

@@rusan-croatia no problem, greetings from Poland Damir!

Screwing is generally the same, you screw it against the counter-nut or against end of the thread on device/connector. Many customers have troubles with regular counter nuts. It is hard to align device, it is hard to tighten nut enough. Sometimes if you overtighten it, it is hard to unscrew it. And similar problems. That is reason why we made connectors with built-in positioning so no counter-nut is needed. Of course, regular modular connectors are still available.

Good idea. We will think about it 🙂

Thank you 🙂

hvala :-)

Give us your contact and we will send you sales@rusan.hr

We have adapter 65 mm of course. Factory (Pard China) adapter does not have any relation with Rusan products.

Link?@@rusan-croatia

The 65mm adapter is not listed.

I understand now. Thank you.

mikron.hr/index.php?route=product/product&path=105_139&product_id=804

We correct the position by moving the rifle (Schiesbock is not 100% in place). The same as you would move the rifle when you shoot personally. Important thing is that we do not make correction of the reticle (zeroing). If you do not understand, we can not help you.

Indeed, clip-on can affect the shot.

Yes, it is possible. Adapter holds zero when detach and attach it again

Yes. You take down Pard clip-on eye piece (together with Rusan connector) and you screw on Pard observation eye piece. That is if you want to use Pard eye piece. You can also use Rusan 2.5x observation ocular...

th-cam.com/video/Dn8f45zo-AA/w-d-xo.htmlsi=sJ3fczSf1PWK4NuQ

You can not

Hi, it is 2.5...2.7 Nm

@@rusan-croatia Great, thanks a lot.

Yes, it fits. You can contact our sales department sales@rusan.hr

1.2...1.4 Nm

Yes, you can use 57 mm adapter for 57.2 mm scope. Adapter has adjustment for +/- 0.2 mm

@@DrIvanRusan thank you

@@DrIvanRusan Now I have this adapter and all my precision problems that I had are gone. This is the best solution in my opinion. It is the shortest, lightest and most accurate option. At least in my experience. Cheers.

No, 47 mm is biggest adapter for Pard that we have.

It must not be bigger. If you measure your scope ocular, precisely, which dimension it is?

@@rusan-croatia its 57,2 mm (and my scope is covered by camouflage paint of Krylon)

so, is more suitabel 57 mm mount or 58 mm?

We talk about Pard adapter, which goes on the ocular, not objective? Newer heard for such big ocular. We do not have dedicated Pard adapter for it.

@@rusan-croatia I need it for Hikmicro Thunder 50 - so its ARM52 adapter...

info@rusan.hr

@@rusan-croatia versendet der Shop auch nach Deutschland?

Versand nach Deutschland?

Bitte senden Sie eine E-Mail an info@rusan.hr Sie geben Ihnen den Kontakt zum Geschäft in Deutschland

Gospodine Grga Cvarak, Hvala Vam na komentaru. Molim vas nazovite me na 049301692 da mi preporučite neku dobru školu stranih jezika. Ili napišite broj pa ću ja nazvati vas. Hvala. Ivan Rusan

@@rusan-croatia ajoooj ..pa cujte sad ne...nemam ja sad vremena za to ..uhvatili ste me bas izmedzu dva posla ali budem ja to odradil ,ne sekirajte se ,budem ne ..

Yes ofc. Just give us instructions how you want test to be made

@@rusan-croatiaThanks! It's up to you, I liked your other videos where you detached/attached other clip-on models to the scope before each shot to demonstrate repeatability.

If you look carefully, you will see that shooter is making corrections (rotating left-right and up-down wheel on the shooting table) between every shot. Please describe your problem to info@rusan.hr and we will try to help you

Yes, you can. You need Modular adapter, see it here mikron.hr/index.php?route=product/category&path=105_139 And on this video th-cam.com/video/BeEMb233RXQ/w-d-xo.html at 0:30

Why not?