วีดีโอ

Thank you Happy new year!!!

Thanks a lot!!

@@zhnme523 Thanks!! My head speed is 3,160 RPM

ไม่สู้ ฮ อะไร หลอกพี่5555555

No mod on this one. It’s a newest Raw 420 model.

@@dueksnk7270 It was because I was curious that it was installed on the xt60 connector battery tray. Thank you, friend

Nice!!

Thanks!!!

Thank you. I’m not really sure about max HS but at 2860 RPM tail’s sound like stock pulley when you do over HS.

500 feel about more lock in and solid but you need to keep an eye on the drivetrain thing will break in the flight if you don’t pay much attention on them. 420 competition feels a lot more power and light compared to the DD version. I might get mine soon this’s a prototype one that belongs to the shop.

@@dueksnk7270 thanks for detailed answer

I put the bearing on the tail unit to push the belt over the tail pulley so it doesn’t slip. Now I took it off and just go for 25T tail pulley which is a lot better.

Thanks for answer. Where did you find the parts to add this bearing? Stock tail pulley is how much teeth? 25T is still ok for higher headspeeds?

@@jeanrochat stock tail pulley was 27T. I don’t have tail belt slippery on 25T but 27T was so bad🤦🏻‍♂️

@@jeanrochat also I made that idle bearing myself. I took it from my Logo 550 on the tail unit.

Thank you !!!

If I was right. I remember we can’t ship a kind of RC stuff to India. You might need someone to pick it up

I cut the prastic ball links about 2-3mm each (both aileron) to make the servo arms 90 deg. also no spacer needed

@@dueksnk7270 ok thank you! I also did that, servo horns are 90 degrees and rotorhead radius arms are also 90 dgrees but when everything is centered when i look from the tail side of the helicopter to the elevater servo (hope thats right) then the push rod is about 5 degrees off angle, but i think thats ok if all three servo pushrods are all the same. Its just unusual to me somehow. I have the V Bar Touch an a Neo V1 where you can trim the center position of the swashplate "and" the top and bottom end positions (level) so that should be no problem. If you had no problem to setup your RAW 500 with these servos (wich are awesome servos by the way) then there should be no problems, i will see when i make the setup in the V Bar.

3,200 RPM 5years old battery 6S 1,800

ขอบคุณมากครับ

I put the bearing on the tail unit to push the belt over the tail pulley so it doesn’t slip. Now I took it off and just go for 25T tail pulley which is a lot better.

ขอบคุณครับ5555

Mikado Vbar Control

Thank you !!!

Thank you 🙏🏻

12s 3300

www.tommotor-rc.com You could contact them form their Facebook.

12S