วีดีโอ

Should I unlock the ps4 before putting in the chip?

Where did you put the two wires from the pixel pal. You mentioned you grounded it, but I see two wires. On the board you connect three wires from what I see. There should be a 4th ? The 3v is there but where did the ground go ?? Thank you

Great review. Too many unboxing vids are product demonstrations and not reviews. I don't want to be sold to, I want to be informed. Looking forward to more vids. Also, the reason it might not have cloned onto the smaller XBox drive might be due to firmware-based security measures implemented to prevent DMCA violations. I saw this video the other day that might shed light on it: th-cam.com/video/nyKUVmJmAGY/w-d-xo.html

Thank you ! I have never done this before but going to try it ! Great video

Have something like this with the option to go from 2.5 inch, 3.5 inch or another source NVME to a target NVME. Yeah that didn't even come close. If the drives are not exactly the same forget it.

cool vid, you may find this cloner cant handle different chipsets, but a starting point

i cant find it no where on amazon

A friend gave me his old Zenith XBV243C DVD / VHS player with a DVD door that would stick. It turns out that the thick rubber band, while not yet broken nor too dried out, had simply become too lose. I had a small bag of 200 mixed sizes of black rubber bands I had ordered from China a few years back (initially to repair an old tape deck). I used one that was a smidge smaller / tighter as well as thinner (so it probably won't last as long) but whatever, it's working again. Your video was extremely helpful. Cheers!

هل هذه التجربة على الجهاز المعدل فقط

Thanks for this, I've already done this and was interested in where you put the mod chip inside the case. Noticed that you weren't bothered about access to the USB C on the chip for future mod image updgrades. Just a tip for your video editing, you could have overlaid the pin outs in your video with editing software to make it clearer for the viewer - just a suggestion!

Jesus Christ no thanks I'll wait a Couple of years more until HEN is like the Ps3 where it's all Softmod this reminds me of those HORRENDOUS geohot Dongles with the Flashing lights from the Ps3 😅

WHAT'S THE POINT MOST OF THE GAMES ARE PENNIES NOW

You can install HEN without that mod chip

Where did you get it

Do you do this for others?!

nice screwdriver

Hi. While updating the speaker via USB , i accidentally switched off. Now I am getting red light. Is there any place I can get the flash file for the board (.bin) so that I can flash directly to the chip? In bose site i download .mdu file but it is not flashing.

11.50 not working 🥲

I just bought this grinder off the FB marketplace! Happy with the machine overall. I am currently brainstorming how to mod it to single dose myself using a 3D printer, model schematic and a dream. I do worry that replacing the hopper with a single doser will make the beans jump up and down instead of grinding. Any experience with modding these?

Have the same mouse with the same problems, tried everything and every time the second day it was the same as before. That what really helped- changing the microswitches, problem gone for good

cant test it? car lights work on 12V

A 1” hole bit and you can really clean up those loose lines. Pull out fridge, drill thru side of cabinet to pull line thru and drill floor behind fridge. Pole the line down thru the cabinet and down thru the floor. Run it along the basement ceiling and drill another hole to bring it up behind the kegerator. No lines in sight. You could even do the same with the co2, drill holes and drop lines down below. You could even get a flow count beeper so you know when gas is low

I can see that some of the copper trace were exposed. will that be a problem if left untreated? others are saying that we can put solder mask.

My Divoom Ditoo is dead too. The lithium battery won't charge. It'll actually turn on and display the clock, but as soon as I try to use bluetooth to change the time / customize it, it dies. I'd like to hardwire mine too, especially since I never take it off the wall socket. Really wish there was a bypass / plugged in option by default. Nice to know it can be done.

if i may ask, what video editing software are you using? sony vegas or davinci?

this seems to have worked for now, wonder how long it'll last. Edit: it's double clicking again just 2 weeks later, gonna have to replace the switch.

The official booger solder method

Glad you posted this video, learned a lot before starting surgery on my Apple Pencil 2

Lower or higher voltage wouldn't have killed it but amperage could/would have.

Thanks Royce, that fixed mine😎

Nice!!!

Thks a lot man. Wish I tried this earlier.

man how does it feel this tmr for precision ?

Whats the machine you are using to desoldering? May you share? Regards

Nice setup dude.

thank you

Great job 👍🏻

I eventually ended up buying a Razer Basilisk and trashing the G502, the Razer Basilisk is very similar to a G502 Hero but seems better made.

How can you fix when calibration after replacement is not allowed on the enhanced

Didn't the cable to the antenna break when you removed the battery? Maybe that's why the pen doesn't work?

To get those scratches off I use the JFJ as a sander only, (10 or 20 seconds )then I throw it on the Eco pro 2 with 4 minutes and the disc comes out as new

It's water on the cotton swab ??

この間、ノイズ音がしたのでスピーカーの掃除をするために動画を参考にしました！ありがとう。 Bluetoothが故障してしまったようで、（接続音はなるがすぐに切断される。端末上では接続された形跡はない） 基盤のBluetoothの部品を交換すれば直りますか？？

Crazy, i never thought this is a common problem. Thanks!

I hade my HDD and SSD both failed after power surge, I replaced the motherboard and got new SSD but I still need my data. Do you think it will be just a fuse that need to bypasses to get my drives working again?

nice work

Bruh, I hate when they make stuff thia annoying to open... Currently cleaning out a lung cancer ps5 and need to open the psu to get the dust/tar out. I need to start selling air purifiers to my lung cancer customers...

I just cleaned on of these and it pumps compound and water good. But it seems when I close it that bothers me the compound nozzles and water nozzles touch the CD barley. Is that right? Does it matter what direction the compound nozzles face? Seems almost as if it’s not delivering enough compound or water from the sound of it when it’s running.

Thank you, removing the battery resurrected my Tivoo! I usually use it with a 5V 1A charger, however I had to first connect it to a 5V 2.4A and disconnect several times before being able to use my regular charger again. Nevertheless it is working fine only with that little board connected without battery.

I need a bit of help. I what you did unclogged mines, and now the tube from outside isn’t sucking the solution out the bottle. I’m not sure why but everything is connected and cleaned. The water tube works fine it sucks the water out of the bottle but not mines.