วีดีโอ

Use the fuse, which is only ON when the ACC or car is on. You can use the SPARE fuse slot or existing fuses using the fuse taps.

how

Check you have the correct harnness, there are 2 type of harnness for this car. And you will need canbus Decoder as well.

@prabhdiyvideos Yes I understand but why even the old one when I putted back does not work anymore

Not sure, might be some connector or wire is broken

Yes, for some cars you will have to cut the middle plastic part. For AC, change the Canbox settings under factory settings, its mentioned in the video as well.

Check the video around 7:23, but the option could be different in your head unit.

Try changing the canbox settings under factory settings for the steering wheel controls. Regarding the above screen try, trying contacting the seller.

Hello, there are 2 types of wiring harness. Check it in the link below. Just fish the USBs to the glovebox. a.aliexpress.com/_mLF28Bg

Works but only if you have the correct harness.

I don't sell, but search on Amazon there might be other sellers selling this.

Put it in the same orientation you took out, if I remember correctly, the LEDS are facing 3 and 9.

@@prabhdiyvideosThat appears to be the case for the low beams - I had to adjust the high-beam LED's to align them vertically.

When you order the unit, ask the seller to send the wiring harness that that supports the back up camera. It will be plug and play

@@prabhdiyvideos I know some manufacturers provide a harness that allows the original backup camera to work with both the original upper screen and with the new screen simultaneously. Does your camera work with both screens the way you have installed it? Great video, by the way! Subscribed.

Only on one screen.

@@prabhdiyvideos thank you for your quick reply. While the rear camera being on both screens would have been fun, I see that it would not be needed.

Hey man, great video...but how do I connect the USB supplied with the abroid unit to the USB units in the armrest console. This is frustrating me. Also, my canbus had only 5 connectors but my OEM radio had 7, so I have like 2 connectors not connected, What do I do?

You will have to connect the red wire of backup camera to back up light bulb's positive wire.

Check if you can change it canbox settings. Or ask selller.

How do you pull up canbus

Check under vehicle or factory settings, it will be password protected, then check under protocols

prabh7620@gmail.com

Check the video around 7:23, I mentioned it in the video, it could be different depending on the canbox. Try all made for this car or brand

Did you ever figure out how to get it to work? I’m having the same issue?

You will need something like this for the DRL to function HB3 9005 DRL Anti-flickering Relay Harness Wiring Fix PWM Issue Compatible with Toyota, Lexus, Subaru, Chevrolet/GMC Express Van for LED Daytime Running Lights Bulbs Replacement a.co/d/eFFSHdL

High beams are 9005

@@prabhdiyvideosthank you!

Which brackets? Can you show.

The bracket that goes across the console that holds the original radio. Where you have to unscrew the screws that hold the lower part of the original touch screen radio

Check the video around 7:08 mins. Transfer clips of old head unit, there 2 clips the bottom corner and metal clip at the top

The clips is not the problem. The transfer all the clips. So you're saying that. The radio in the video fit with no issues.

It depends on the radio, the one in the video fitted fine no issues. But I helped someone to install the radio like a month ago, it didn't fit, I had to cut the plastic piece, in the center from the dash

Surrey

@@prabhdiyvideos brother I am living in Brampton 😊

Change the Canbus settings, I mentioned it in the video 07:23. Ask the seller which setting to select in the canbus settings. Password is usually 8888

iDatastart HCX MA3 Plug and Play Harness ADS-USB-ECO Idatalink ADS-USB-ECO Programming Tool Or use this website to know which kits will fit lockdownsecuritycanada.ca/collections/mazda-3-2014-2018-remote-starters-security/products/idatastart-hcx-with-ma3

Ali express

Is it working good ?

So far it's working. I have installed these radios in a few cars. So far all are working.

Mándame el proveedor al que le compraste

It depends which one you are ordering, buy the one which supports Android Auto and Car Play

If it's playing radio, connections seem fine, and check the settings.

@@prabhdiyvideos wat I need to check

@marcusbrown4533 check vehicle canbus settings, if you can not figure out, message the seller, they may be able to help out. For me, AC didn't work, changing Canbus settings helped

Marcus brown4533 did you figure it out?

Try resetting to factory settings or try changing canbus settings

Nothing it was just plug and play.

I installed Sealight Leds from Amazon. But I would advise you to buy AUXITO. www.amazon.ca/AUXITO-Headlight-12000LM-Wireless-Conversion/dp/B0BNKTRRDB/ref=mp_s_a_1_1_sspa?crid=3PM5US6FIQX7O&keywords=auxito+9005&qid=1683596338&sprefix=auxito%2Caps%2C168&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyUzVXMlJTUVJKM0tLJmVuY3J5cHRlZElkPUEwMzI4MjY3MzcyUUJUUUNWOUxMRiZlbmNyeXB0ZWRBZElkPUEwNjA4MDE0NENFRTRSTEo1UTFKJndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=

Watch the video around 7:25 you will have to change the vehicle settings

Change the setting how and to what?

Its the canbox settings (usually under vehicle settings menu) and its different with different canbox decoders. So check the seller or try the one which is similar to your make and model.

Yes, put the video on a USB drive. Or you can download Netflix and other apps to watch.

th-cam.com/video/JbvnZTEP_lQ/w-d-xo.html

Sorry, I don't have that car anymore. Check the car's manual or ask the seller may be the seller can help you on this.

Go to settings and change the language

Didn't check, and after a few weeks, I sold my car

Good to hear, I was also worried, but worked for me too

Ace Hardware cut the key for $3 it worked great! I went back in to store cut a third key and the said they made a mistake they only cut their keys and refused to cut the third.

@@dougmontgomery6192 Haha, may be try another hardware store, most of the hardwade stores can copy the key.

Yes, these are really good quality and thick struts. Moreover, I liked the carbon fiber design. Yes, I did notice that, but there are 2 rubber supports to adjust the height. Just screw in those 2 rubbers to adjust the hood height.

C$ 193.33 | Buick Lacrosse GM Alpheon 2009 2010 2011 2012 Android 11 Car Radio GPS Navigation Vertical screen Tesla Style Multimedia a.aliexpress.com/_mPBC2t0

If yoy want android auto and car play, order thia one. C$ 225.38 54%OFF | EKIY T9 Tesla Car radio For Buick Lacrosse GM Alpheon 2009 2010 2011 2012 Multimedia Video Player Navi GPS 2 Din Android Auto BT a.aliexpress.com/_mtg14Aw

The short answer is that you don't need to connect those 2 wires for the remote start to work. If you want the Headlights to turn on when you remote start the car, then only you will have to connect the 2 wires to headlights wiring harness. Horn works fine. The car starts fine without this. Headlights does turn on if it's dark outside anyhow, even if you don't connect those wires.

The screen comes with extra small speaker, did you connect that speaker, that is for warning sounds 5:14

I will check on this as soon as I get home from work and let you know.

No, I bought it from Aliexpress

I didn't try, it was summer when I installed, I sold the car before winter, so never tried. Ask the seller before ordering one

Yes, mine car harness came with Sub wire.

@@prabhdiyvideos oh shit bet